Привет, вот я привожу советский автобус Чавдар 11М3 из игры Рабочие и ресурсы, у него отдельные колеса, поэтому их не нужно разъединять вручную, он не такой подробный, но все же очень полезный, не загружайте его в роблокс видеоигра, потому что она уже есть
Tag: Soviet
-
Soviet Infantry 3D Model
Soviet Infantry IISoviet Infantry25th Rifle II25th Rifle Infantry CamoInfantry Independence CamoRed Guard IIRed GuardTamansov IITamansov
-
Soviet Winter 3D Model
Soviet Winter IISoviet Winter 25th Regiment II25th Regiment 61st Battalion II61st Battalion 122nd Regiment II122nd Regiment
-
Soviet Naval 3D Model
Aurora IIAurora Black Sea IIBlack Sea Expeditionary CamoSoviet Naval IISoviet Naval Tashkent IITashkent
-
Soviet Sapper 3D Model
Soviet Sapper IISoviet SapperBridge Sapper IIBridge SapperD?fense Sapper IID?fense SapperForest Sapper IIForest SapperGreen ThumbExpeditionary Summer Camo
-
Soviet Underground 3D Model
Soviet Underground IISoviet UndergroundDevoted IIDevoted Disruptors IIDisruptors The Unjust IIThe Unjust
-
Soviet house 3D Model
пятиэтажный кирпичный дом, в модели только 1 часть дома (1 секция)на крыше деталей нет, в нижней части дома, тоже.
-
3ds Max Steam generator from the Soviet power plant 3D Model
This is a model of a steam generator that is used at a coal-fired power plant in the Belarusian city of Minsk. Requires selection of suitable textures.
-
3ds Max Abandoned Boat Station 3D Model
This is a model of an abandoned boat station building. Similar buildings were built in the USSR. Due to the simplicity of the building design, the model has few polygons. The model has no textures, but the materials are named according to the intended texture pattern.
-
Mig 25RB Foxbat B 3D Model
The MiG-25RB Reconnaissance Bomber, also known as Foxbat-B, the reconnaissance type of the MiG-25.
-
Vostok-1 Soviet Semyorka R-7 family roket 3D Model
3D model of the Korolevs Soviet R-7 Semyorka, the rocket Vostok-1 (rocket R-7A).This folding model is designed for a school report to the Cosmonautics Day.
-
ISU-152 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Tupolev Tu-134 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Il-76 UN 3D Model
The Ilyushin Il-76 (which has the NATO reporting name of `Candid’) was developed as a replacement for the turboprop powered Antonov An-12, mainly for military use. Development under the design leadership of G V Novozhilov in the late 1960s resulted in the type’s first flight on March 25 1971. Series production commenced in 1975 and the first examples entered Aeroflot service that year. In the now classic military freighter configuration, the Il-76 features a high mounted wing passing above the fuselage, four engines, Ttail, rear loading ramp and freight doors. The texture is for UN.
-
ZiS 101a sport 3D Model
High quality model ‘ZiS 101a sport’ specially for your projects.Quality and accurate modeling, allows you to use model in any projects. Model corresponds to all proportions and the real size. Elaborated all small details, accurate UVW mapping and high-resolution textures make the model more realistic, allowing you to use a model in high-resolution renderers (close-up), as well as for creating videos, or video advertising or use in the film industry.The model is created in Autodesk 3ds Max 2010, rendered with Vray 2.20.02, textures and materials are included.Please don’t forget to rate the model, for us it is very important :)3D model available in these formats: 3ds Max 2010 (.max), Autodesk FBX 2006 (.fbx), OBJ (.obj)Scene Statistic below:-Subdivision ON:Polys: 1 133 762Tris: 2 264 569Edges: 2 289 458Verts: 1 155 899-Subdivision OFF:Polys: 190 177Tris: 375 972Edges: 387 383Verts: 197 409- Scale of all details (100,100,100)- Model has real-world scale and is centered at 0,0,0- All pivots in place- Materials, objects and textures have the correct names- No cleaning up necessary, just drop your models into the scene and start rendering- Model is intended for subdivisionTextures are included:-ZiS_101a_sport_counter_diffuse.png (21X200)-ZiS_101a_sport_back_light_bump.png (500X500)-ZiS_101a_sport_carpet_diffuse.png (1000X1000)-ZiS_101a_sport_ci_diffuse.png (250X250)-ZiS_101a_sport_dashboard_diffuse.png (3000X578)-ZiS_101a_sport_front_light_bump.png (1000X1000)-ZiS_101a_sport_leather_bump.png (1000X1000)-ZiS_101a_sport_leather_diffuse.png (1000X1000)-ZiS_101a_sport_rubber_black_bump.png (500X500)-ZiS_101a_sport_rubber_white_bump.png (1000X1000)-ZiS_101a_sport_vinyl_bump.png (500X502)-ZiS_101a_sport_wodd_diffuse.png (1000X1000)-ZiS_101a_sport_wood_bump.png (1000X1000)Please don’t forget to rate the model, for us it is very important :)© Leonid Naku [Zurel] 2018
-
Il-76 Iran 3D Model
The Ilyushin Il-76 (which has the NATO reporting name of `Candid’) was developed as a replacement for the turboprop powered Antonov An-12, mainly for military use. Development under the design leadership of G V Novozhilov in the late 1960s resulted in the type’s first flight on March 25 1971. Series production commenced in 1975 and the first examples entered Aeroflot service that year. In the now classic military freighter configuration, the Il-76 features a high mounted wing passing above the fuselage, four engines, Ttail, rear loading ramp and freight doors. The texture is for Iran Air Force.
-
MiG-15Romania 3D Model
The Mikoyan-Gurevich MiG-15 (NATO reporting name ‘Fagot’) was a jet fighter developed for the USSR by Artem Mikoyan. The MiG-15 would be one of the first successful swept wing jet fighters. It achieved fame over the skies of Korea, outclassing all UN fighters except for the F-86 Sabre. The MiG-15 would be the starting point for the advanced MiG-17, which successfully downed more advanced American fighters such as the F-105 Thunderchief over Vietnam. This texture is for Romania Air Force
-
WW2 Machine Gun Pack 3D Model
General:3D model pack consisting of the following WW2 items:-MG 42 Machine Gun-DTM Machine Gun-Thompson 1928File formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
Western Front Pack 3D Model
General:3D model pack consisting of the following WW2 items:-Tiger Tank Early-Jeep Willys MB-Thompson 1928File formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
USSR Armor Pack with Interior and Engine Bay 3D Model
General:3D model pack consisting of the following WW2 items:-T34-76 with interior and chassis-T34-85 with interior and chassis-SU-100 with interior and chassisAll models have the interior and engines bays/drivetrains modeled, and the hatches can be opened, like in the preview renders.File formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
USSR Armor Pack with Interior 3D Model
General:3D model pack consisting of the following WW2 items:-SU-100 with interior-T34-85 with interior-T34-76 with interiorAll models have the interior modeled, and the hatches can be opened, like in the preview renders.File formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
USSR Armor Pack 3D Model
General:3D model pack consisting of the following WW2 items:-SU-100-T34-76-T34-85File formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
T34-85 Tiger Tank Late Pack with Interior and Engine Bay 3D Model
General:3D model pack consisting of the following WW2 items:-Panzer Tiger Late Model with interior-T34-85 with interiorAll models have the interior and engines bays/drivetrains modeled, and the hatches can be opened, like in the preview renders.File formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
T34-85 Tiger Tank Late Pack with Interior 3D Model
General:3D model pack consisting of the following WW2 items:-Panzer Tiger Late Model with interior-T34-85 with interiorAll models have the interior modeled, and the hatches can be opened, like in the preview renders.File formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
T34-85 Tiger Tank Late Pack 3D Model
General:3D model pack consisting of the following WW2 items:-Panzer Tiger Late Model-T34-85File formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
T34-76 Tiger Tank Early Pack with Interior and Engine Bay 3D Model
General:3D model pack consisting of the following WW2 items:-Panzer Tiger Early Model with interior-T34-76 with interiorAll models have the interior and engines bays/drivetrains modeled, and the hatches can be opened, like in the preview renders.File formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
T34-76 Tiger Tank Early Pack with Interior 3D Model
General:3D model pack consisting of the following WW2 items:-Panzer Tiger Early Model with interior-T34-76 with interiorAll models have the interior modeled, and the hatches can be opened, like in the preview renders.File formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
T34-76 Tiger Tank Early Pack 3D Model
General:3D model pack consisting of the following WW2 items:-Panzer Tiger Early Model-T34-76File formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
Soviet 85mm and German 88mm Ammo Pack 3D Model
General:3D model pack consisting of the following WW2 items:-German 88mm Shell-Soviet 85mm ShellFile formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
Full WW2 Pack 3D Model
General:3D model pack consisting of the following WW2 items:-Panzer Tiger Early Model-Panzer Tiger Late Model-T34-76-T34-85-SU-100-MG 42-Thompson 1928-DTM Machine Gun-Jeep Willys-File formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
Eastern Front Armor Pack with Interior and Engine Bay v2 3D Model
General:3D model pack consisting of the following WW2 items:-Panzer Tiger Early Model with interior and chassis-Panzer Tiger Late Model with interior and chassis-T34-76 with interior and chassis-T34-85 with interior and chassis-SU-100 with interior and chassisAll models have the interior and engines bays/drivetrains modeled, and the hatches can be opened, like in the preview renders.File formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
Eastern Front Armor Pack with Interior and Engine Bay v1 3D Model
General:3D model pack consisting of the following WW2 items:-Panzer Tiger Early Model with interior-Panzer Tiger Late Model with interior-T34-76 with interior-T34-85 with interiorAll models have the interior and engines bays/drivetrains modeled, and the hatches can be opened, like in the preview renders.File formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
Eastern Front Armor Pack with Interior v2 3D Model
General:3D model pack consisting of the following WW2 items:-Panzer Tiger Early Model with interior-Panzer Tiger Late Model with interior-T34-76 with interior-T34-85 with interior-SU-100 with interiorAll models have the interior modeled, and the hatches can be opened, like in the preview renders.File formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
Eastern Front Armor Pack with Interior v1 3D Model
General:3D model pack consisting of the following WW2 items:-Panzer Tiger Early Model with interior-Panzer Tiger Late Model with interior-T34-76 with interior-T34-85 with interiorAll models have the interior modeled, and the hatches can be opened, like in the preview renders.File formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
Eastern Front Armor Pack v2 3D Model
General:3D model pack consisting of the following WW2 items:-Panzer Tiger Early Model-Panzer Tiger Late Model-SU-100-T34-76-T34-85File formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
Eastern Front Armor Pack v1 3D Model
General:3D model pack consisting of the following WW2 items:-Panzer Tiger Early Model-Panzer Tiger Late Model-T34-76-T34-85File formats:-.blend, rendered with cycles, as seen in the images;-.obj, with materials applied and textures;-.dae, with materials applied and textures;-.fbx, with material slots applied;-.stl;3D Software:This 3d model was originally created in Blender 2.79 and rendered with Cycles.Materials and textures:The model has materials applied in all formats, and is ready to import and render.The model comes with multiple png image textures.Preview scenes:The preview images are rendered in Blender using its built-in render engine ‘Cycles’.Note that the blend files come directly with the rendering scene included and the render command will generate the exact result as seen in previews.Scene elements are on a different layer from the actual model for easier manipulation of objects.General:Each model of the pack comes with 5 archives for each format, making it very easy to use.The model is built strictly out of quads and is subdivisable.It comes in separate parts, named correctly for the sake of convenience.For any problems please feel free to contact me.Don’t forget to rate and enjoy!
-
Il-78 3D Model
The Ilyushin Il-78 (NATO reporting name Midas) is a four-engined inflight refuelling tanker based on the Il-76. Three aircraft may refuel in flight simultaneously from one Il-78. All Russian Air force Il-78s are now joined into the special 203 “Orlovski” regiment of aerial tankers. 6 Il-78s were ordered by India for 2003 and 8 were ordered by China in 2005. The initial version of this article was based on material from aviation.ru. It has been released under the GFDL by the copyright holder.
-
Mig-15 China 3D Model
The Mikoyan-Gurevich MiG-15 (NATO reporting name ‘Fagot’) was a jet fighter developed for the USSR by Artem Mikoyan. The MiG-15 would be one of the first successful swept wing jet fighters. It achieved fame over the skies of Korea, outclassing all UN fighters except for the F-86 Sabre. The MiG-15 would be the starting point for the advanced MiG-17, which successfully downed more advanced American fighters such as the F-105 Thunderchief over Vietnam. This texture is for China Airforce.
-
Tu-95 3D Model
The Tu-95 BEAR was perhaps the most successful bomber produced by the Soviet aviation, enjoying long service in a variety of roles and configurations. It was the only bomber deployed by any country to use turbo-prop engines, which provided extraordinarily long endurance at speeds only slightly less than comparable turbojet-powered heavy bombers.
-
Mig-15 3D Model
The Mikoyan-Gurevich MiG-15(NATO reporting name “Fagot”) was a jet fighter developed for the USSR by Artem Mikoyan. The MiG-15 would be one of the first successful swept wing jet fighters. It achieved fame over the skies of Korea, outclassing all UN fighters except for the F-86 Sabre. The MiG-15 would be the starting point for the advanced MiG-17, which successfully downed more advanced American fighters such as the F-105 Thunderchief over Vietnam.
-
Mig-15 Korea 3D Model
The Mikoyan-Gurevich MiG-15 (NATO reporting name ‘Fagot’) was a jet fighter developed for the USSR by Artem Mikoyan. The MiG-15 would be one of the first successful swept wing jet fighters. It achieved fame over the skies of Korea, outclassing all UN fighters except for the F-86 Sabre. The MiG-15 would be the starting point for the advanced MiG-17, which successfully downed more advanced American fighters such as the F-105 Thunderchief over Vietnam. This texture is for Korea Airforce. And the pilot of this mig-15 shot down 7 aircrafts, and demaged 2 aircrafts.
-
BMP-3 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Yak38 3D Model
Production of the Yak-38 Forger began in 1975. It makes Yak-38 the world`s second operational VSTOL aircraft, which is just after the Harrier series. It has been very active in the cold war and joind many war including USSR Army invading Afghanistan.
-
T-72 B-1 3D Model
Polygons:708659Verticles:432058Hi everyone.Today I present to you a high-quality highly detailed model of the Main Battle Tank of Russia T-72 B,made using PBR textures.The body has 4K texture and everything else is 2K.All you see on the screen now is a pure render without color correction and post-processing.The landscape is attached to a file from Corona Render.2 separate HDRI included.
-
SSh-36 Helmet USSR 3D Model
HelloThis is USSR helmet called SSh-36 (СШ-36), also known as “Halhingolka”(Халхинголка). About this model:• Two texture options – clean and dusty/rusty• Clean topology – no ngons, poles, flipped polygons or overlapping vertices• Unreal Engine 4 project with all textures and materials applied• Textures in 4K resolution for Unreal Engine 4 (Diffuse+Normal+OcclusionRoughnessMetallic) + 2K textures for Unreal Engine 4 in a separate archive. All Textures are in TGA (targa) format• Non-triangulated models in *.max format with assigned standard materials and textures (Diffuse+Specular+Normal+Glossiness) in 2K resolution• Unity packages. Include meshes, materials and textures (AlbedoTransparency + SpecularSmoothness + Normals) in 4k resolution.• fbx and obj files without textures• Helmet have approximately real dimensions
-
AS VAL 3D Model
AS VAL low-poly 3d model ready for Virtual Reality (VR), Augmented Reality (AR), games and other real-time apps.Not rigged but ready for it. Perfectly for FPS and close scenes.Bayer can get any scope or acc for this model for free if neededI can always make some chenges in model especialy for your projectMesh:-obj-fbx-3dsIncludes textures:-PBR 4K-UnrealEngine 4K-Unity 4KAlso you always can contact me and ask for model of ANY real weapon.
-
AK-47 3D Model
This is a high definition quality polygon 3d model of a AK-47 with PBR and V-Ray textures. Extremely detailed and realistic. Suitable for movie prop, architectural visualizations, advertising renders and other.The 3ds Max file includes cameras, lights and render settings.This is a high quality asset originally modeled in 3DS Max 2018.Material counts: 13You do not have to do anything, just press the “Render” button.-Model unwrapped manually to make most efficient use of the Unfold3d-Including FBX, OBJ, 3ds formats-The model has real-world scale and is centered at the origin- Units used: centimetres- Mesh object is editable poly.- Clean Unwrap UV- Good topology- Scene in Marmoset are included.RENDER SCENE IS INCLUDED in 3DS MAX 2018_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _As this is a model for visualization specifications, it is not intended for subdivision._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _TEXTURES PBR:- There are 6 textures:-Base color-Normal Map-Height Map-Metallic Map-Ambient Occlusion-Roughness MapV-RAY:- Diffuse- Glossiness- Height- IOR- Normal- Reflection- Texture Resolutions are 2048×2048 PNG format- Turntable and images were rendered in Marmoset 3Also included renders in V-RAY 3.6Please RATE this product if you are satisfied.Also check out my other models.
-
Somers-class destroyer project 48 Kiev 3D Model
Leaders of destroyers of project 48, also known as leaders of destroyers of the type “Kiev” (by the name of the main ship) – the type of leaders of destroyers, built in 1939-1941 for the Soviet Navy. In total, under the project 48 for the “Great Fleet” of the USSR, twenty leaders of destroyers were to be built at Soviet shipyards. According to the documents, by the fall of 1940 eight leaders were laid. The construction of three of them, as well as the construction of three more ships, was stopped in October 1940 in favor of the construction of the leaders of the project 47 with the universal artillery of the main caliber. Two more leaders, planned to be bookmarked at the shipyard No. 402 in Molotovsk, were never laid. In 1944-1950, a corrected 48-K project was designed at TsKB-17 and at the design bureau of plant No. 444, according to which the corps of leaders “Kiev” and “Yerevan” were to be completed, but in 1950 the leadership of the shipbuilding industry was a decision was made to abandon the completion of these two ships. Both unfinished ships were converted into target ships and flooded at various times during testing of anti-ship missiles.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
Soviet cruiser Mikhail Kutuzov 3D Model
Mikhail Kutuzov (Russian: Михаил Кутузов) was a light cruiser project no. 68-bis (designated the Sverdlov class by NATO) of the Soviet and later the Russian Navy’s Black Sea Fleet.She was laid down at the Black Sea Shipyard in Nikolayev on 23 February 1951 and commissioned on 30 February 1954. Mikhail Kutuzov joined the Black Sea Fleet after commissioning and sea trials, on 31 January 1955.On 28 July 2002, Mikhail Kutuzov was opened to the public as a museum ship in Novorossiysk. On 1 October 2012, she was made a branch of the Central Naval Museum.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
Murmansk light cruiser with OS2U 3D Model
USS Milwaukee (CL-5) was an Omaha-class light cruiser built for the United States Navy during the 1920s. The ship spent most of her early career assigned to the Asiatic and Battle Fleets. In 1941 she was assigned to the Neutrality Patrol until she was refitted in New York in late 1941. She escorted a troop convoy to the Pacific in early 1942 before returning to the South Atlantic where she patrolled for German commerce raiders and blockade runners. In November, she intercepted one of the latter, but it scuttled itself before it could be captured. In 1944 she was temporarily transferred to the Soviet Navy and commissioned as Murmansk. The ship was returned by the Soviets in 1949 and sold for scrap in December.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
BTR-70 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
BTR-60PU 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
ZSU-23-4 Shilka 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Soviet Brick Bread Cut 3D Model
Soviet Brick Bread Cut low-poly 3d model ready for Virtual Reality (VR), Augmented Reality (AR), games, architectural visualizations, matte painting and realtime projects.-Scaled down to approximate real world size-Texture size: 4096*4096 (diffuse, normal, ambient occlusion map and cavity map)-PBR ready (tested in Unity5)
-
Soviet Brick Bread 3D Model
Soviet Brick Bread low-poly 3d model ready for Virtual Reality (VR), Augmented Reality (AR), games, architectural visualizations, matte painting and realtime projects.-Scaled down to approximate real world size-Texture size: 4096*4096 (diffuse, normal, ambient occlusion map and cavity map)-PBR ready (tested in Unity5)
-
Dragunov Sniper Rifle SVD 3D Model
The Dragunov sniper rifle (formal Russian: 1963 Snayperskaya Vintovka sistem’y Dragunova obraz’tsa 1963 goda (SVD-63), officially ‘Sniper Rifle, System of Dragunov, Model of the Year 1963’) is a semi-automatic sniper/designated marksman rifle chambered in 7.6254mmR and developed in the Soviet Union.Game ready model, rendered in Marmoset Toolbag 3, scene and materials included. All objects subdivided for animations, correct pivots.Full PBR Metalness textures:Rifle 4096×4096 :AlbedoNormalRoughnessMetallicAOScope 2048×2048:AlbedoNormalRoughnessMetallicAO
-
3D DT-75 – Soviet Ttractor – Buldozer 3D Model
DT-75 – Soviet Ttractor(Buldozer).==========================================This is accurate model of DT-75 – Soviet Tractor.Thumbnails rendered with Advanced Render in Cinema R18, you can open scene up to Cinema R12.————————————————— Standard Render(AR) with the Global Illumination and Ambient Occlusion.- Model intended for subdivision.- real worlds scale (5,52,72,5 m)- no isolated or overlapped vertices,- no overlapped faces,- mostly quads- no extraneous, unnecessary objects etc.- grouped, properly named objects,- ready to merge into the scene.Objects placed on layer, very easy to work with.———————————————————–Included:Native File Format: Cinema 4d r18Additional File Format: .FBX / .obj..
-
UAZ 452 Old Military 3D Model
UAZ 452 Old Military – low poly 3d model.All Render & Turntable was rendered in Marmoset Toolbag 3*********************************- real worlds scale. Units used: cm, model is 436 cm lenghs- no isolated or overlapped vertices,- no overlapped faces,- mostly quads- no extraneous, unnecessary objects etc.- grouped, ready to merge into the scene—-Polycount:Tris: 14634Vertices: 7875Textures:Size: x4096 / x2048 (Car/Glass)Pbr: Albedo/Normals/Roughness/Specular/Metalic/AO/EmissiveClassic: Diffuse/Normals/Specular*********************************File formats:- OBJ-Fbx-C4d-dfx-3ds-stl*********************************Hope you like it!Also check out my other models, just click on my user name to see complete gallery or on our website.
-
Old Badminton Racket 3D Model
This is a model of an Old Badminton RacketDetails:- There are no unused vertexes and polygons- This model is low-poly and has PBR textures, so you can use it in real-time renders- This model contains 1 separate objects- This model contains standard materials only- This model allows for close-up renders, and was originally modeled in Cinema 4D R18- No special plugin needed to open scene- All preview images are rendered with Advanced Render- No Photoshop or compositing used, product is ready to render out-of-the-box- No part-name confusion when importing several models into a scene- All textures and materials are included- Units: mm- Renders have no postprocessingTextures:- Racket – 4096×4096, Diffuse, BaseColor, Normal, Specular, Glossiness, Roughness, Metallic, AO, Opacity, .png- Sky – 2048×1024, .exrHope you like it!
-
Old Tennis Racket 3D Model
This is a model of an Old Tennis RacketDetails:- There are no unused vertexes and polygons- This model is low-poly and has PBR textures, so you can use it in real-time renders- This model contains 1 separate objects- This model contains standard materials only- This model allows for close-up renders, and was originally modeled in Cinema 4D R18- No special plugin needed to open scene- All preview images are rendered with Advanced Render- No Photoshop or compositing used, product is ready to render out-of-the-box- No part-name confusion when importing several models into a scene- All textures and materials are included- Units: mm- Renders have no postprocessingTextures:- Racket – 4096×4096, Diffuse, BaseColor, Normal, Specular, Glossiness, Roughness, Metallic, AO, Opacity, .png- Sky – 2048×1024, .exrHope you like it!
-
Su-27 3D Model
low-poly 3d model ready for Virtual Reality (VR), Augmented Reality (AR), games and other real-time apps.Each model is rigged and animated in 3ds Max, and the FBX files contain baked-in animationsLegendary aircraft Soviet and now the Russian army.the model of the aircraft is prepared for realtime, there is animation of the chassis closing, the bones are arranged so that you can make any animation with any part of the aircraft. The nozzles of the engines are also tied to the bones, one bone is responsible for the rotation of the nozzles, and the other for the constriction / expansion.in the archive 19 textures resolution 2048 * 2048PBR materialslod_0tris 75098poly 39733verts 44491lod_1tris 50615poly 27240verts 31361lod_2tris 18246poly 9495verts 11270———————–if you have any questions – I will be glad to help
-
T-62 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
BRDM-2 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Mikoyan-Gurevich MiG-15 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Mikoyan-Gurevich MiG-21 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Yakovlev Yak-9 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Zil 131 3D Model
This is a realistic 3d model military car Zil 131.Models use the correct topology. You can see it on the model render with a grid.3D Model Zil 131 has 64175 polygons and is ideal for games and 3D-photorealistic visualization.In this model, textures are not applied.Unpack the format that you need, and run it in a 3D editor.I hope you enjoy my work.
-
Russian Armored Vehicle BMP-F1 3D Model
Russian Armored Vehicle BMP-F1 is a high quality and ready to be animated. You can easily position it the way you need or animate.*********************************Features:- High quality polygonal model, correctly scaled for an accurate representation of the original object.- Models resolutions are optimized for polygon efficiency.- All colors can be easily modified.- Model is fully materials applied.
-
Ilyushin Il-2 Sturmovik 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Petlyakov Pe-2 3D Model
“Petlyakov Pe-2” is a high quality model.Comes with detailed textures. Good enough for close up shots! Final images rendered with V-Ray.********************************- Model, textures and materials have logical names.- Correctly scale of the original objects.- The TurboSmooth function can be used to increase mesh resolution if necessary.- Available for Autodesk 3DS Max 2012 and above.- No special plugin needed to open scene.- No missing files.********************************Maps: 29Maps formats: PNG (.png)Maps size: 4096Polys: 95723Verts: 99556Units: cm********************************File formats:- 3DS Max 2012 (V-Ray 2.30)- FBX- OBJ********************************Thank you for your purchase.********************************
-
Mil Mi-8 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
MiG-17 3D Model
The Mikoyan-Gurevich MiG-17 (NATO reporting name: Fresco) is a high-subsonic fighter aircraft produced in the USSR from 1952 and operated by numerous air forces in many variants. It is an advanced development of the very similar appearing MiG-15 of the Korean War. The MiG-17 was license-built in China as the Shenyang J-5 and Poland as the PZL-Mielec Lim-6.MiG-17s first saw combat in 1958 in the Second Taiwan Strait Crisis and later proved to be an effective threat against more modern supersonic fighters of the United States in the Vietnam War. It was also briefly known as the Type 38 by U.S. Air Force designation prior to the development of NATO codes.File formats: max. / 3DS./obj./ mtl./ FBX.
-
RGM-40 3D Model
The RGM-40 Kastet (English: Brass knuckles) grenade launcher is a stand-alone version of the Russian GP-30 grenade launcher with a telescoping stock, AK-type pistol-grip and flip-up tangent sights. It is a single-shot muzzle loaded weapon with a self-cocking trigger mechanism and offers a high degree of commonality with the GP-30. It was designed primarily for police use and can use a wide range non-lethal ammunition (e.g. tear gas, stun grenades, etc.). It can also use standard 40mm VOG-25 and VOG-25P fragmentation grenades.
-
Soviet Apartment Buildings pack 3 of 3 – 9 floors 3D Model
This is the third pack of soviet apartment buildings, it contains five nine-storeyed soviet buildings from 1 to 5 entrances respectively.All game ready. Also included blend. file with ready to go cycles materials and packed textures.All textures are PBR and located in textures.rar archive.Get full collection here.
-
Soviet Apartment Buildings full collection 3D Model
This is a full collection of Soviet Apartment buildings also known as “Khrushevka’s”. It contains 15 buildings with 3, 5, and 9 floors and 1-5 entrances.All game ready. Also included blend. files with ready to go cycles materials and packed textures.All textures are PBR and located in textures.rar archive.
-
Soviet Apartment Buildings pack – 9 floors 3D Model
This pack contains 5 soviet apartment buildings from 1 to 5 entrances respectively.All game ready. Also included blend. file with ready to go cycles materials and packed textures.All textures are PBR and located in textures.rar archive.
-
Military submarine 3D Model
Military submarine 3D modelMilitary nuclear submarine. Mid level of details.unwrapedThe type of submarine is fictional.Fits perfectly to all underwater scenes.Hope u like it
-
Soviet Apartment Buildings pack – 5 floors 3D Model
This pack contains 5 soviet apartment buildings from 1 to 5 entrances respectively.All game ready. Also included blend. file with ready to go cycles materials and packed textures.All textures are PBR and located in textures.rar archive.
-
RPG 7 3D Model
Rocket is included with the launcher in this purchase, both UV’s are on the same 1 to 1 space. Game ready asset made using high to low baking. Both sights Are unattached to the main mesh with the proper pivots to allow folding up or down. Trigger unattached from main mesh to allow pulling animation.-DimensionsLauncher Length: 94cmRocket Length: 81cmTexture Size: 2048 x 2048-Files IncludedFBX FileOBJ FilePBR TexturesUnity 5 TexturesUnreal 4 Textures
-
TT-33 3D Model
The TT-30 (Russian: 7,62-мм самозарядный пистолет Токарева образца 1930 года, translit. , 7,62 mm Samozaryadny Pistolet Tokareva obraztsa 1930 goda, “7.62 mm Tokarev self-loading pistol model 1930”, TT stands for Tula-Tokarev) is a Russian semi-automatic pistol. It was developed in the early 1930s by Fedor Tokarev as a service pistol for the Soviet military to replace the Nagant M1895 revolver that had been in use since Tsarist times, though it ended up being used in conjunction with rather than replacing the M1895. It served until 1952, when it was replaced by the Makarov pistol.Modelin in 3D max
-
MT-LB 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Soviet Building Angular 3D Model
This Soviet Building Angular is a high quality, photo real model that will enhance detail and realism to any of your projects. Located in the center of coordinates.The main components are the Beton base and the Glass Insert.The model can be used for decorating interior/exterior.The file is neatly modeled, grouped together.-No any third party plug-in used-No extra elements included with model-Lights and cameras are not included with model-HDRI map doesn’t included with modelMax Corona scene includes:- 5 Object(s)- 30 PNG textures at 4096×4096. All textures are PBR.Max Vray scene:- 5 Object(s)- 30 PNG textures at 4096×4096. All textures are PBR.Matlib archive includes:-2 sets of textures,2048×2048 PNG,512×512 PNG – for each scene. All textures are PBR.All objects are real-world scale.All scenes in “cm”.All priview images are rendered with Corona Renderer.
-
Churchill MK III – 61 – Soviet Army 3D Model
Churchill MK.III – 61 – 49 Separate Heavy Guards Breakthrough Tank Regiment – Leningrad – 1944Originally modelled in cinema4D. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.Features:- Inside scene: -model – 12 textures- All materials, bodypaint-textures and textures are included.- No cleaning up necessary, just drop your models into the scene and start rendering.- No special plugin needed to open scene.- Phong shading interpolation / Smoothing – 35°- c4d Version R16- Polygones – 729428 Vertices – 484289 – 172 Objects – 12 textures- obj File – lwo file – 3ds file – fbx file Version 2010
-
Churchill MK III – 517 – Soviet Army 3D Model
Churchill MK.III – 517 – 36 Separate Heavy Guards Breakthrough Tank Regiment – Kursk 1943Originally modelled in cinema4D. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.Features:- Inside scene: -model – 12 textures- All materials, bodypaint-textures and textures are included.- No cleaning up necessary, just drop your models into the scene and start rendering.- No special plugin needed to open scene.- Phong shading interpolation / Smoothing – 35°- c4d Version R16- Polygones – 729428 Vertices – 484289 – 172 Objects – 12 textures- obj File – lwo file – 3ds file – fbx file Version 2010
-
Melnikov House 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Sukhoi Su-35 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Stalin caricature rigged animated low poly game ready 3D Model
Caricature of Joseph Stalin. Low poly, rigged, animated game ready 3D character with PBR textures. Textures are 4K, optimized for Unity game engine.Rig is made for Unity mecanim.One custom animation as in 3d viewer and youtube video included.Included in pack:-Maya LT 2017 files with Rigged Stalin in T-pose, and animation as individual Maya file.-FBX files with rigged T-posed Stalin and animation as individual FBX. FBX files are exported from Maya.-OBJ file in T-pose in case you want to rig him yourself.-Unity 2017.1.0f3 pack-Textures 4K in PNG format.-Pipe 3D model.Textures PBR: Color map, normal map, spec map. All textures are 4K. Can be reduced to 1K without significant loss of quality.Browse my store to see more caricatures i created.If you like my style and would need to have custom characters created for your projects, feel free to contact me for freelance work
-
Soldier and Trophy 3D Model
Soviet soldier and German trophyQuality 3d modelhas a diffuse map, normal map, specular map …Unfortunately at this time I can not make a high-quality renderbecause of the problem with the computer …I buy a 3D model, you will not regret buying because everything is done qualitatively!if something does not suit you, you can return the goods and get your money!Understand I get only $ 5.40 from the sale and I can not lower the price …
