3DHunt.co

Tag: (smaller)

  • Smaller Gödel, Escher Bach shadow cube 3D Print Model

    Smaller Gödel, Escher Bach shadow cube 3D Print Model

    Summary
    This is just the design of https://www.thingiverse.com/thing:151240, scaled down to 40% of its original size (40mm).
    Print Settings
    Resolution:
    0.2mm
    Infill:
    20%

  • Interlocking MacBook Pro Retina Stand for Smaller Printers 3D Print Model

    Interlocking MacBook Pro Retina Stand for Smaller Printers 3D Print Model

    Summary
    For those of you with a smaller printer like me, this interlocking remix of Thomasdc_’s geometric MacBook Pro Retina Stand (https://www.thingiverse.com/thing:1330829) will allow you to print this great stand in multiple parts without having to glue or fasten anything together.
    The parts are an interlocking slide fit that’s very secure, and is best assembled via tapping them together with a weighted object (i.e. small hammer or large wrench)
    The gap in the interlocking pieces is 0.15mm so layer heights above this will be tight. I have printed at 0.175 and it’s a nice tight fit.
    Print Settings
    Printer:
    Monoprice Select Mini Rafts:
    No Supports:
    No Resolution:
    0.175mm Infill:
    20% Notes:
    Note that gap between interlocking parts is 0.15mm. Layer heights will affect the fit of these parts because of orientation of the locking features. They are oriented this way because the stand is very sturdy as a result and doesn’t require glue.
    Post-Printing
    Inspect the interlocking channels for zits and other inconsistencies clean the up as required. Mine came out nice and didn’t require any clean up.
    How I Designed This
    I traced the .STL file in Fusion 360 and created my own part splits and locking features once I had the outline traced. I changed the bracing just because I like the look of triangles.

  • Red Hood Helmet (Batman) smaller pieces 3D Print Model

    Red Hood Helmet (Batman) smaller pieces 3D Print Model

    Summary
    This is a remix of the original mask from Killonious.https://www.thingiverse.com/thing:2396250
    Someone asked me to cut the original mask into smaller pieces.
    It can be printed with a small 3D printer like the MP Select Mini that has a printing area of only 110x110x110mm.
    I have cut the pieces with Maya 2016, the orientation may not be correct so check well before printing.
    A couple of pieces are longer than 110mm so you need to rotate them to fit the print area and maybe they need the support.
    For assembly refer to the images of the original version.
    The splitted parts are renamed with letters A and B.
    For example, if the original piece was Part_7_v2, the splitted pieces are Part_7A_v2 and Part_7B_v2.
    I did’t print the mask but there shouldn’t be errors.
    If you find any issue leave a comment.

  • Flat brush 3D Model

    Flat brush 3D Model

    BUILD IN : maya 2013file have both .OBJ and .MA filepolycount:1k only with more detail