3DHunt.co

Tag: Shaving

  • Shaving Brush Travel Tube 3D Print Model

    Shaving Brush Travel Tube 3D Print Model

    Summary
    I have previously played with similar designs on a travel brush tube for carrying a shave brush. I was able to create one by remixing a few other projects into something that worked for my particular brush. I wanted to build a design from the ground up using openscad so it was parametric and could be easily recreated for different height and width options. The result is what is attached.
    To change the dimensions you can set 5 options:
    diameter – the inside diameter of the brush tube
    height – the inside height of the brush tube
    venting_height_percentage – how much of the brush tube is venting
    knurl_bevel – the bevel you want on your lid knurling
    knurl_smooth – the smoothing you want on your lid knurling
    By default it generated a tube and two lids (top and bottom). You can out lines 19,20,21 if you want to generate objects seperately

  • Pack of Shaving Bottles 3D Model

    Pack of Shaving Bottles 3D Model

    Pack of Shaving Bottles model ready for Virtual Reality (VR), Augmented Reality (AR), games and other real-time apps.Shaving Bottle with labelPack of Shaving Bottles 3D model ready for Virtual Reality (VR), Augmented Reality (AR), games, Postproduction, Photomanipulation and other real-time apps.Pack of Shaving Bottles 3D model!Materials in 3DS Max & Sketchup included.Models already preloaded in lumion 6, just copy and paste on your computer or import it from the included scene.Textured Label image file included!!!——————————Polygons: 250,319Vertices: 155,344—————————File formats:- 3dmax 2013 – Vray 3.40- OBJ- FBX- DAE- 3DS-Sketchup 2013-Lumion 6——————————-Enjoy!

  • Shower Shaving Gel Holder 3D Print Model

    Shower Shaving Gel Holder 3D Print Model

    Summary
    A simple shaving gel canister holder for the shower. Should fit most 55mm canisters.
    Designed to be held by a 2.5″ ‘mushroom head’ suction cup, such as http://a.co/3Xw5eVm (without the hook).
    Print Settings
    Printer Brand:
    Wanhao Printer:
    Wanhao Duplicator i3 Plus Rafts:
    No Supports:
    Yes Resolution:
    0.2mm Infill:
    25% Notes:
    For the best quality, this model is designed to be printed in the upright position.
    Depending on your overhang capabilities, a small support is recommended for the suction cup mounting hole, but should remove easily. I printed mine at 25% infill, 3 top/bottom layers, however you likely could decrease infill without sacrificing strength of the part.
    How I Designed This
    Modeled in Fusion 360