3DHunt.co

Tag: SFIC

  • SFIC Holder (Control Key Required) 3D Print Model

    Summary
    This is an ergonomic adapter to make holding SFIC cylinders more comfortable while picking. This will allow the control lug to engage a cavity inside the enclosure to hold the cylinder in place as it would an SFIC housing. Partially hollow through and through to reduce filament and give you access to the rear of the plug.
    If you do NOT have a control key, you will need to use this model so you do not need to engage the control position: https://www.thingiverse.com/thing:2776191

  • SFIC Holder 3D Print Model

    SFIC Holder 3D Print Model

    Summary
    An M2.5 screw and nut can be inserted and used as a set screw to hold the lock firmly in place. This is an ergonomic adapter to make holding SFIC cylinders more comfortable while picking. This will allow the control lug to be sticking out and still fit inside the enclosure. Partially hollow through and through to reduce filament and give you access to the rear of the plug.
    This is a theoretical model as I do not currently have an SFIC cylinder on-hand to test with.
    Print Settings
    Rafts:
    No Supports:
    No Resolution:
    .2 Infill:
    15