3DHunt.co

Tag: sensors

  • B9 Robot radar sensors (ears) 3D Print Model

    B9 Robot radar sensors (ears) 3D Print Model

    Summary
    This is my first upload to Thingiverse. These are the parabolic radar sensors, more commonly referred to as ears, on the sides of the radar platform of the B9 robot’s head. They are scaled for a full size B9 replica. The sensors are a bit thicker than aluminum sensors would be, approximately 1/16 of an inch thick, for added durability necessary for printing in plastic. They already have the holes for the motor posts and the set screws. Best printed in PLA on the fine setting with a layer thickness of 0.1mm. More files to follow. Enjoy!

  • LCD TV Support for Oculus Rift SENSORS (CV1) 3D Print Model

    LCD TV Support for Oculus Rift SENSORS (CV1) 3D Print Model

    Summary
    A support for placing your Oculus Rift CV1 sensors on the top of a LCD TV.
    PLEASE NOTICE: I designed for my LCD TV, which widht is 1,5cm.
    But you can rescale it for any LCD TV: just measure your TV width, and change scale for the Z AXIS accordingly.
    But only rescale the Z axis, don’t mess with the others! If you do a uniform scale, the Rift sensors won’t fit anymore…
    Print Settings
    Rafts:
    Doesn’t Matter Supports:
    Yes Infill:
    100%

  • Enclosure for IR-Lock Landing System Sensors 3D Print Model

    Enclosure for IR-Lock Landing System Sensors 3D Print Model

    Summary
    This is an enclosure designed to contain a Pixy camera (CMUCAM5) and a Lidar-Lite V3 for the IR-Lock precision landing system. The grid of holes at the bottom of the enclosure are spaced 3.4mm from each other and serve to provide a flexible way to mount the enclosure a drone frame. It was initially designed to fit the mounting slots on a DJI F450 bottom PCB.
    The enclosure uses M3 screws. All the holes on the bottom part of the enclosure can be drilled out using 2.5mm dia drill and tapped directly using M3 screws. The holes on the top part of the enclosure, drilled out using a 3.1mm dia drill, serve as through-hole for the M3 screws. The clearance between top and bottom part of the enclosure is 0.25mm providing a loose fit for pieces printed on our printer.

  • Smartwatch

    Smartwatch

    Smartwatch.Cinema 4D file format.All textures, materials and HDRI files included.No plugins required.Thank you for your visit!