Mount for Runcam2 , FoxeerHD, course camera.There are three types of fastening (pads) – a clamp type clamp, with a foot pad, or with a leg with a thread and a simple frame. Plus there is a body of the course camera.There are three types of fastenings for Runcam2 and FoxeerHD, all seven sets in the file.
Tag: RunCam
-
Turbowing Cyclops 3 DVR Camera to Runcam adapter 3D Print Model
Summary
This is a Turbowing Cyclops 3 DVR camera to runcam adapter so it can be mounted in almost all runcam camera mounts. This has not been tested please comment if it don’t work. thank you -
Runcam Micro Cam Mount for Shendrones Tweaker FPVA 3D Print Model
Summary
Combination noseguard/cam mount for Runcam Micro and Shendrones Tweaker FPVA Edition. Print in TPU. FPV cam angles 20-50. -
Runcam 2 Picatinny Rail Mpount 3D Print Model
Summary
This is a runcam 2 picatinny mount, you will have to get the bolt and nut yourself, I suggest going to a local hardware store and seeinbg what fits in this. -
Runcam Mini low profile mount 3D Print Model
Summary
I made up a quick 10 deg. low profile camera mount for the Runcam Swift mini. This was in tandem with the Runcam mock up I did to test fit the setup.
This is the file I used to make this mount.https://www.thingiverse.com/thing:2391750
Print Settings
Printer Brand:
LulzBot Printer:
TAZ 5 Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Notes:
scaled up the mount 1.02 in cura andit fit the camera great
How I Designed This
This was drawn in Autodesk Fusion 360http://shop.runcam.com/runcam-swift-mini/ -
Runcam Micro Camera Mount 3D Print Model
Summary
Have not printed it yet but going to. Work in progress. -
RunCam Swift mini mount for 25mm Martian II / Alien
Summary
Mount for the RunCam Swift Mini that allows use of 25mm stand-offs on the Martian II and Alien frames. Some modifications to the top plate might be necessary depending on the desired camera angle.
Replaces the stock camera mount.
Print Settings
Printer Brand:
Solidoodle Printer:
Solidoodle 4 Rafts:
No Supports:
No Resolution:
0.1-0.3 Infill:
100% Notes:
Tested using ABS. PETG and PLA should also be possible
How I Designed This
Autodesk Fusion 360
