Summary
The retaining arms on my Caliburn SCAR Barrel broke on my first print, and started to weaken on my second, so I made a quick reinforcement piece. This not only helps to hold the retaining arms so they will be less likely to break, but it makes the whole SCAR barrel operate a little more tightly.
I included an obj, which should hopefully be set up correctly, but I am unsure as I model in Blender.
It is good fodder for visual modifications, as it does not have to twist, and sits on top of the barrel.
Enjoy, and feel free to give suggestions, or remix!
Tag: reinforcement
-
Cealyn the Caliburn – Scar Barrel Reinforcement 3D Print Model
-
Bed Frame Reinforcement A3 3D Print Model
Summary
Exactly the same model as made by AndresVH with the exception of the plate gap. The gap was narrowed to fit a JG Aurora A3. -
Y axis structural reinforcement 3D Print Model
Summary
Reinforcement well edited not like the other one that had sharp edges and ugly shapes.
You must need longer M3 screws to tight the motor or just edit the STL to match your preferences.
Print Settings
Printer:
anet a8 Rafts:
No Supports:
Yes Resolution:
0.2 Infill:
25% -
Caliburn – Lower Stock Reinforcement 3D Print Model
Summary
This is a reinforcment part for https://www.thingiverse.com/thing:2376150.
I printed my Caliburn in PETG, which is more flexible than the PLA the designer intended the blaster to be printed in. The stock_alt2 part would be spread apart by the clear tube at the end when the threaded rods were tightened, enough to reduce catch’s reliability. Rather than print an entire new blaster in PLA, I made this part which keeps the threaded rods and stock_alt2 from spreading.
Print Settings
Printer:
D300VS Rafts:
No Supports:
No Resolution:
.2mm Infill:
20% Notes:
Rotate so it is standing vertically before printing -
3D model iron chair
iron chair 3D model- The original file is created using 3ds Max 2009 with V-Ray materials.- All preview images are rendered with V-Ray 2.20.02- The system unit is [mm].- All objects and materials are logically named for ease of scene management.- The models are grouped for easy selection and further manipulation.- Smoothing modifier is stored in the stack for easy editing.- All maps are in the 3ds Max zipfile.- The lights, cameras, and any backgroundnot described above objects are not included in the product.Formats- 3ds Max 2009.- OBJ.
-
iron chair set 3D model
iron chair set 3D model- The original file is created using 3ds Max 2009 with V-Ray materials.- All preview images are rendered with V-Ray 2.20.02- The system unit is [mm].- All objects and materials are logically named for ease of scene management.- The models are grouped for easy selection and further manipulation.- Smoothing modifier is stored in the stack for easy editing.- All maps are in the 3ds Max zipfile.- The lights, cameras, and any backgroundnot described above objects are not included in the product.Formats- 3ds Max 2009.- OBJ.+Bonus Iron chair set simple tube
