Made using 3ds Max 2015. Rendered with V-ray 3.00.08.The model can be folded and expanded by rotating “Blade” and “Lock” to the desired position.Archives include: materials (.mat), textures, OBJ, FBX, 3ds, 2015 max scene.In scene: there is only a knife Opinel #8. No lighting and stand.
Tag: pocket
-
PocketBook 515 3D Model
Qualitative 3d model of a ‘PocketBook 515’- Originally created with 3ds Max 2013- Final rendering was made using V-Ray 2.30.01Features:- Model is built to real-world scale- Units used: millimeters. 1unit = 1millimeters- Coordinates of the location of the model in space (x0, y0, z0)- Mesh is optimized- All object are named- All materials are named- The model is presented in formats max, fbx.- All texture size 2048×2048 JPEG- 3ds Max models are grouped for easy selection, and objects are logically named for ease of scene management.- High quality polygonal model, correctly scaled for an accurate representation of the original object.- No special plugin needed to open scene.- Completely ready for use in visualisation- All relevant objects are separated- All materials are properly named and groupedNumber of polygons:- Poligons: 2512- Vertices: 2727
-
LED Flashlight 3D Model
This is a realistic 3d model LED Flashlight.Models use the correct topology. You can see it on the model render with a grid.In this model, textures are not applied.These models can be used for presentations, different scenes.Unpack the format that you need, and run it in a 3D editor.I hope you enjoy my work.
-
Pocket Watch and Chain 3D Model
Pocket Watch and Chain timepiece time pocketwatch vintage classic antique accessory clock vray holder
-
80 Series Land Cruiser dashboard pocket 3D Print Model
Summary
A replacement pocket for above the stereo. It’s flatter and deeper than the factory pocket, and has a cutout in the rear through which a cable can be fed -
Pocket Watch 3D Model
This is a model of the old pocket watch of the USSR. There is an engraving on the top cover.Diameter: 88,14 mmThickness: 20,85 mmTexture Maps:metal (4000×4000)wood (4096×4096)number(4096×4096)
-
Man Character 3D Model
This is the 3D Model of “Man Character”This 3d Model is created in Maya 2011.Also available Other 3D Formats :1. Maya 20112. Max 20093. OBJ4. Fbx5. 3Dswith JPEG Texture FileIts very Low Poly Model for Game & Complete for Animation and Other useAll Renders are also available for every 3D Angle of the Character…Render Format : JPEG Size : 1280 x 1024All Renders are also available for every 3D Angle of the Character…Render Format : JPEG Size : 1280 x 1024
-
Pocket mini cannon Free 3D Model
Model dimensions:- height – 57,9 mm- length – 65,6 mm- width – 80mmDesigned in Solid Works 2015, rendered in Keyshot 5.0.99.
-
XL-RCM 10.0 PIXXY: Pocket drone / FPV quad Remix 3D Print Model
Summary
I chopped up the original model to print with no supports but some glue, a little sanding and patience are required. PLA
Print Settings
Printer:
Deegreen Rafts:
No Supports:
No Resolution:
100 μm Infill:
30% Notes:
I chopped up the original model to print with no supports but some glue, a little sanding and patience are required. PLA -
Phone support 3D Print 3D Model
Phone support to a piece of snail3D PRINTING PARAMETERSPhone support to a piece of snailAvailable formats upon request: .c4d, .obj, .fbx, .ma/.mb, .lwo/.lws, .3ds, .3dm, .dxf/.dwg, .stl.
-
Bed Frame Pocket 3D Print Model
Summary
The hook on the side is meant to be an eyeglass holder and it also has a phone charger hole in the bottom. -
Crossbow-mini Free 3D Model
Hello. Boring day at office…this is the right answer for it. Make it for you and your co-worker and have fun. Just simply install rubber band,put the bolt trough body and trigger. Darts make from grill sticks ( on the and of darts put balls) and you are ready for war.For printing i used 0,2mm precision, PETG with hotend 250C,bed first layer 75C and then 50C. No suport needed.crossbow lenght: 14cmheight:6.5cmdarts lenght: 7.5cmrange: cca. 6-7m
-
Crossbow-mini 3D Model
Hello. Boring day at office…this is the right answer for it. Make it for you and your co-worker and have fun. Just simply install rubber band,put the bolt trough body and trigger. Darts make from grill sticks ( on the and of darts put balls) and you are ready for war.For printing i used 0,2mm precision, PETG with hotend 250C,bed first layer 75C and then 50C. No suport needed.crossbow lenght: 14cmheight:6.5cmdarts lenght: 7.5cmrange: cca. 6-7m
-
Collapsible pocket phone stand 3D Print Model
Summary
A 2 part phone stand i desighned , untested as of now -
Butterfly Knife 3D Model
Butterfly Knife Balisong Bear Mgc Pocket army force military blade sword cutlery weapon combat marines fighting dagger troops purpose special Benchmade switchblade
-
Leather wallet 3D Model
Clean model of leather wallet, fully textured – perfect prop for your scenes.Was created in 3ds max 2016 rendered with V ray.Texture used 720×720 tileableMaterials asignedNamed corectly and UnwrapedBasic rig for open/close of the wallet.No special pllugins usedHope u will like it
-
Box of pocket (for cigarette or other ..) 3D Print Model
A pocket box that can hold cigarettes or something else.
-
Chevy Colorado Front Pocket AMPS Dock 3D Print Model
Summary
The tiny front pocket in the dash of the ’15 and up Colorado is nearly useless. Even if you shove a wallet or garage door opener in there it’ll slide right out if you hit the gas at all. This ‘pocket dock’ for phone or tablet gives it some purpose.
To use the dock you’ll want 10lb ‘poster’ tape – the kind that is a mm or two thick. Place a piece on the top and bottom flat parts, pinch, and insert into the dock. The hole pattern matches industry standard AMPS. Once appropriately installed it is pretty locked in. You’re more likely to rip the phone from the mount than the dock from the pocket.
There are three different versions. the base version sits very close to the dock edge and is appropriate for RAM ball style docks or other longer, positionable docs. The medium-lower dock hangs below the pocket and is appropriate for most phones and likely horizontal tablets. The ‘long’ version is good for lower profile docks (eg: magnetic).
Print Settings
Notes:
Super-easy to print on its side as long as you have decent bed adhesion. -
.38 Special 5-Round Pocket Case 3D Print Model
Summary
Item Details
One of my friends requested a case for .38 Special rounds to keep in his pocket while hunting. This is what I came up with.
This is 5 parts total.
You may need to do some sanding to get the dovetail joints aligned, but it shouldn’t require much.
I used super glue to secure the parts, but, without any sanding, everything was functioning without the super glue.
The clip may require some slight bending to get the case to close. I had one function perfectly off the printer, but the other one had to be gently pried back. I think it was just a printer cooling issue that caused some slight warping.
All objects should be oriented correctly for printing.
Printing Details
I used a 0.2 mm layer height since this item doesn’t need to be pretty.
This piece doesn’t require a lot of skill.
Print Settings
Rafts:
No Supports:
No Resolution:
0.2 mm -
Pocket Door Handle 3D Print Model
Summary
Pocket door handle insert. Print two – one for each side. Can use small piece of plastic (I used a raft from the project) between the two halves to clock out sound and light. -
3D Burlap sack model 3D Model
The model can be used to visualize repair shops, in the industrial and other sectors. One burlap bag contains in the scene.Originally modelled in AI 2017. Final images rendered with 3ds Max 2016 + V-Ray. **************************************Model: 8 objects,2 materials (VRay standard materials) Geometry: Polygonal Tris only **************************************File formats: – 3ds Max 2013 with V-Ray material; – 3ds Max 2016 with V-Ray material; -step; -igs; -obj.-and other formatsEvery model has been checked with the appropriate software. ************************************** Also check out my other models, just click on my user name to see complete gallery
-
3D Laser Pointer
LASER POINTER===============================- Modeled in Blender.- Preview image rendered using cycles.- All scene are included in .blend files.- Poly count are before sub division- Great for close up render.- All parts and materials are logically named.OTHER FORMATS=================- 3ds MAX- COLLADA (.dae)- Autodesk FBX
-
Laser Pointer 3D Model
LASER POINTER
===============================
– Modeled in Blender.
– Preview image rendered using cycles.
– All scene are included in .blend files.
– Poly count are before sub division
– Great for close up render.
– All parts and materials are logically named.
OTHER FORMATS
=================
– 3ds MAX
– COLLADA (.dae)
– Autodesk FBX
