Additional Info: Gear 1 – 3D model (*.gsm+*.obj+*.3ds) for interior 3d visualization.
Tag: pinion
-
Kit bash55 pieces – collection-18 3D Model
high and low poly kit bashes – 55 piecesinclude fbx, stl and obj files, material and HDRIparts are triangulated
-
Kit bash54 pieces – collection-17 3D Model
high and low poly kit bashes – 54 piecesinclude fbx, stl and obj files, material and HDRIparts are triangulated
-
Kit bash54 pieces – collection-16 3D Model
high and low poly kit bashes – 54 piecesinclude fbx, stl and obj files, material and HDRIparts are triangulated
-
Kit bash53 pieces – collection-14 3D Model
high and low poly kit bashes – 53 piecesinclude fbx, stl and obj files, material and HDRIparts are triangulated
-
Kit bash53 pieces – collection-13 3D Model
high and low poly kit bashes – 53 piecesinclude fbx, stl and obj files, material and HDRIparts are triangulated
-
Kit bash54 pieces – collection-12 3D Model
high and low poly kit bashes – 54 piecesinclude fbx, stl and obj files, material and HDRIparts are triangulated
-
Kit bash55 pieces – collection-11 3D Model
high and low poly kit bashes – 55 piecesinclude fbx, stl and obj files, material and HDRIparts are triangulated
-
Kit bash52 pieces – collection-10 3D Model
high and low poly kit bashes – 52 piecesinclude fbx, stl and obj files, material and HDRIparts are triangulated
-
Kit bash54 pieces – collection-9 3D Model
high and low poly kit bashes – 54 piecesinclude fbx, stl and obj files, material and HDRIparts are triangulated
-
Kit bash56 pieces – collection-8 3D Model
high and low poly kit bashes – 56 piecesinclude fbx, stl and obj files, material and HDRIparts are triangulated
-
Kit bash54 pieces – collection-7 3D Model
high and low poly kit bashes – 54 piecesinclude fbx, stl and obj files, material and HDRIparts are triangulated
-
Kit bash50 pieces – collection-6 3D Model
high and low poly kit bashes – 50 piecesinclude fbx, stl and obj files, material and HDRIparts are triangulated
-
Kit bash54 pieces – collection-5 3D Model
high and low poly kit bashes – 54 piecesinclude fbx, stl and obj files, material and HDRIparts are triangulated
-
Kit bash55 pieces – collection-4 3D Model
high and low poly kit bashes – 55 piecesinclude fbx, stl and obj files, material and HDRIparts are triangulated
-
Kit bash58 pieces – collection-3 3D Model
high and low poly kit bashes – 58 piecesinclude fbx, stl and obj files, material and HDRIparts are triangulated
-
Kit bash52 pieces – collection-2 3D Model
high and low poly kit bashes – 52 piecesinclude fbx, stl and obj files, material and HDRIparts are triangulated
-
Kit bash58 pieces – collection-1 3D Model
high and low poly kit bashes – 58 piecesinclude fbx, stl and obj files, material and HDRIparts are triangulated
-
Pinion conical 3D Model
Pinion conical 3D modelTechnical specifications:i=14Number of teeth-1664Module – 2************************The object is modeled in the environment Autodesk Inventor 2018.To create a photo renderer, use Inventor Studio.************************The model contains the most popular formats************************The model contains the most popular formats. Each file was checked for opening and full content by the model.Thank you for coming to see this model. Also pay attention to other models by clicking on the name of the account in the right corner.
-
Pinion conical 3D Model
Pinion conical 3D modelTechnical specifications:i=11Number of teeth-1616Module – 2************************The object is modeled in the environment Autodesk Inventor 2018.To create a photo renderer, use Inventor Studio.************************The model contains the most popular formats************************The model contains the most popular formats. Each file was checked for opening and full content by the model.Thank you for coming to see this model. Also pay attention to other models by clicking on the name of the account in the right corner.
-
Pinion conical 3D Model
Pinion conical 3D modelTechnical specifications:i=2/1Number of teeth-3216Module – 2************************The object is modeled in the environment Autodesk Inventor 2018.To create a photo renderer, use Inventor Studio.************************The model contains the most popular formats************************The model contains the most popular formats. Each file was checked for opening and full content by the model.Thank you for coming to see this model. Also pay attention to other models by clicking on the name of the account in the right corner.
-
Pinion conical 3D Model
Pinion conical 3D modelTechnical specifications:i=14Number of teeth-1664Module – 2************************The object is modeled in the environment Autodesk Inventor 2018.To create a photo renderer, use Inventor Studio.************************The model contains the most popular formats************************The model contains the most popular formats. Each file was checked for opening and full content by the model.Thank you for coming to see this model. Also pay attention to other models by clicking on the name of the account in the right corner.
-
INDUCTIVE SENSOR RACK AND PINION – DRAKON EXTRUDER BODY 3D Print Model
Summary
THIS IS A MANUAL ADJUST SENSOR CARRIAGE FOR AUTOMATIC BED LEVELING.
-THE MAIN PROBLEM I HAVE WITH AUTO LEVELING WAS THAT SOME TIMES MY BED (MADE OF 3MM PLYWOOD) WOULD POSSIBLY WARP.
-ANOTHER POSSIBILITY IS THAT MY X_AXIS WOULD FLOAT OFF OF THE LEAD SCREW A LITTLE BIT IF I DIDN’T PRE-HEAT BEFORE I AUTO LEVELED.
-THIS ALWAYS MEANT I HAD TO REDO ALL THE ADJUSTMENTS BETWEEN THE X-AXIS AND THE SENSOR HEIGHT. I ALSO NEVER QUITE LIKED THE ADJUSTMENTS IN AVAILABLE IN THE FIRMWARE REGARDING SENSOR HEIGHT.
-THAT IS POINT OF THE RACK AND PINION CARRIAGE FOR THE SENSOR. TO DECREASE TIME SPENT ADJUSTING ANYTHING MECHANICALLY AND IN THE FIRMWARE/SOFTWARE.
-DECREASING THE WEIGHT AND SIZE WAS ALSO MY GOAL, TRYING TO KEEP THE SENSOR AS CLOSE TO THE NOZZLE AS POSSIBLE.
THE PINION HAS A PRESS FIT INNER DIAMETER THAT SHOULD STAY IN ITS PLACE PRETTY WELL AN IF THERE IS ANY MOVEMENT I ADDED A HOLE FOR INSERTING EPOXY TO REALLY STICK THE GEAR TO THE BOLT.
HARDWARE USED* [NOT INCLUDING ALL HARDWARE USED WITH THE DRAKON MOUNT ITSELF]
1- 4MM X 16MM WINGED BOLT (I IMPROVISED ON THIS MYSELF WITH A WING NUT AND A BOLT, USING PLIERS)
1- 4MM LOCK NUT
THERE IS A TOOL ADDED THAT IS USED TO HOLD THE GEAR IN PLACE AGAINST THE RACK WHILE YOU THREAD THE BOLT THROUGH THE GEAR TO KEEP IT FROM MOVING. -
Kitabeshes – parts of Robots and Heavy Machines -low and high poly- part 4-257 peaces 3D Model
high and low poly kit bashes – 257 piecesinclude fbx, stl and obj files, material and HDRIsome of parts are subdivided and some are triangulatedthere are part-1 , part-2, part-3
-
Kitabeshes – parts of Robots and Heavy Machines -low and high poly- part 4257 peaces 3D Model
high and low poly kit bashes – 257 piecesinclude fbx, stl and obj files, material and HDRIsome of parts are subdivided and some are triangulated
-
Kitabeshes – parts of Robots and Heavy Machines -low and high poly- part 3-255 peaces 3D Model
high and low poly kit bashes – 255 piecesinclude fbx, stl and obj files, material and HDRIsome of parts are subdivided and some are triangulated
-
Kitabeshes – parts of Robots and Heavy Machines -low and high poly- part 3255 peaces 3D Model
high and low poly kit bashes – 255 piecesinclude fbx, stl and obj files, material and HDRIsome of parts are subdivided and some are triangulated
-
Kitabeshes – parts of Robots and Heavy Machines -low and high poly- part 2255 peaces 3D Model
high and low poly kit bashes – 255 piecesinclude fbx, stl and obj files, material and HDRIsome of parts are subdivided and some are triangulated
-
Kitabeshes – parts of Robots and Heavy Machines -low and high poly- part 1255 peaces 3D Model
high and low poly kit bashes – 255 piecesinclude fbx, stl and obj files, material and HDRIsome of parts are subdivided and some are triangulated
-
Bolts and gears-part-3 119 pieces 3D Model
high and low poly bolts and gears – 119 piecesinclude fbx, stl and obj files, material and HDRI
-
Traxxas X-Maxx Pinion 3D Print Model
Summary
* not tested in RC Car **
im waiting for nylon filament, maybe i make in ABS one to try, but nylon is my favorite.
i think 100 infill is a good idea, it must be strong for the 8s xmaxx.
in the modell i use a modified slipper clutch from the 6s. I think so become the pinion not too much power on it.
Module 1
54 T
50 T
46 T
26 T Motor
Print Settings
Printer:
Anycubic I3 Mega Rafts:
No Supports:
No Resolution:
0,1 Infill:
100 -
Bolts and gears-part-2 119 pieces 3D Model
high and low poly bolts and gears – 119 piecesinclude fbx, stl and obj files, material and HDRI
-
Bolts and gears-part-1 119 pieces 3D Model
high and low poly bolts and gears – 119 piecesinclude fbx, stl and obj files, material and HDRI
-
Drive Pulley 3D Print Model
Drive pulley 100 * 100 mm.
Created from a few geometric shapes.
Can be used as a component of a construction project.
I can create the shaft that goes with it and a sprocket. -
Sci Fi Toggle switch 3D Model
Electric Toggle Switchmetal componentsall models has relatively low poly count -about 1000-2000 (few les, few more) , but more details can be easily add by adding mesh smooth modifier (smootheable models)-Formats included:- Obj- Fbx- 3dsPolygon and Vertice count with smoothing:Polygons-2 213Vertices-2 286All of our models are originally made in Blender 2.78 and then rendered inBlender Cycles with a fidelity that is optimal up to a 2k render. The models are made to real world scale using centimeters. Our models are intricately designed so that they can be used in closeup renders.Thanks for viewing, and be sure to checkout the rest of our models!RICCO1234!)))))
-
Electric switch(Sci Fi) 3D Model
Electric Switch metal componentsall models has relatively low poly count -about 1000-2000 (few les, few more) , but more details can be easily add by adding mesh smooth modifier (smootheable models)-Formats included:- Obj- Fbx- 3dsPolygon and Vertice count with smoothing:Polygons-2132Vertices-1998All of our models are originally made in Blender 2.78 and then rendered inBlender Cycles with a fidelity that is optimal up to a 2k render. The models are made to real world scale using centimeters. Our models are intricately designed so that they can be used in closeup renders.Thanks for viewing, and be sure to checkout the rest of our models!RICCO1234!)))))
-
100 low-poly gears-kitbashes and machine parts 3D Model
100 low-poly gears-kitbashes and machine parts
In collection HDRI+materials
