6 lego bricks in different color variations.
Tag: pieces
-
Big Bullzeye Clock – Pieces cut for 200×200 build plate 3D Print Model
Summary
These are pieces that are too big for a 200×200 build plate cut to fit – super glue together -
Altoids Tin Staunton Chess Pieces 3D Print Model
Summary
These are the pieces for my Altoids Tin Chess Board at: https://www.thingiverse.com/thing:2823112
They are meant to accept 4 mm X 2 mm disk magnets. You can find these cheaply from China on eBay in quantities of 500 for less than $10. I was trying to figure out how to make a magnetic chess set without using a stupid amount of magnets. It occurred to me that a flat steel sheet would work, but I had none. These tins on the other hand, I have tons of. They only cost a few dollars anyway and come with mints.
The pieces fit upright with the lid closed just fine. They measure about 7 mm diameter at the base of each piece.
Print Settings
Printer:
Dildahmetron
Rafts:
No
Supports:
No
Resolution:
0.4 mm nozzle w/ 0.2 mm layer heights
Infill:
15% but they’ll probably be solid anyway
Notes:
Be careful removing them from the bed. -
Jaune Arc from RWBY Armor Pieces 3D Print Model
Summary
Upload of the armor pieces of Jaune Arc from RWBY. They will need to be sized, and possible edited for better usage and cosplay but these are the base files. -
A set of hangers consists of 13 pieces 3D Model
A set of hangers consists of 13 pieces – beautiful pendants which will delight the eye and lift the mood. All pendants can be adjusted in size before printing, you can change colors and textures. In set 2 option 13 pieces of 1 option with textures and option 2 without the textures and coloring (empty). Both ready to print. File formats object .obj .3mf .mtl
-
Batman Injsutice 2 Armor Pieces 3D Model
Batman Injsutice 2 Armor Pieces Print 3D print modelBatman Injsutice 2 Armor piecesThe helmet isn’t includedHigh Poly modelAutodesk FBX (.fbx) 35 MB3D Studio (.3ds) 3.62 MBStereolithography (.stl) 67.8 MB3D Studio Max (.max) 98.6 MBOBJ (.obj) 96.2 MBPls check the size before useContact me if there are any problems.Thank you.
-
Tile Based Chess Pieces 3D Print Model
Summary
I made these Tile based Chess pieces when I herd about Tile Chess. -
Chess Set 3D Model
– Modeled in Blender- Preview image rendered using cycles- In Blender You can decrese or increse the subdivision lvl- All scene are included in .blend files- Poly count are before sub division- No special plugin needed to open scene- Only quads and tris polygons- The rendered preview images have not been post processedinclude environment texture 1024×512 jpgClick on my user name to see my complete galleryHope You like it.
-
Off Road Wheel 3D Model
3D Model of an Off Road WheelModel created in Blender 2.78a. Rendered with Cycles Render________________________________________________________________________________________The product contains the following files:- Blender file (main file)- Autodesk FBX file- OBJ file- Collada (.dae) file———————————————————————Number of polygons (without subsurf modifier): 25490Number of polygons (with subsurf modifier x 2 subdivisions): 398440________________________________________________________________________________________Follow V-Multi:http://www.vmulti.pthttps://www.facebook.com/vmultiproducts/
-
REI Kingdom Table Center Support Pieces 3D Print Model
Summary
I bought an REI Kingdom table at the REI garage sale for $20. The table came with 4 cross-members for the ends. It should have come with 2 cross-members for the ends and 2 center cross-members with locating pins. I took some pictures of the correct pieces in the store on another table and designed replacement locating pins in Tinkercad for the center cross-members. I printed at 40% in-fill with supports. I then modified two of the end pieces by cutting off the end tabs, drilling holes for my part, and riveting them on. It works perfectly. Good as new and saved $80. -
Red Hood Helmet (Batman) smaller pieces 3D Print Model
Summary
This is a remix of the original mask from Killonious.https://www.thingiverse.com/thing:2396250
Someone asked me to cut the original mask into smaller pieces.
It can be printed with a small 3D printer like the MP Select Mini that has a printing area of only 110x110x110mm.
I have cut the pieces with Maya 2016, the orientation may not be correct so check well before printing.
A couple of pieces are longer than 110mm so you need to rotate them to fit the print area and maybe they need the support.
For assembly refer to the images of the original version.
The splitted parts are renamed with letters A and B.
For example, if the original piece was Part_7_v2, the splitted pieces are Part_7A_v2 and Part_7B_v2.
I did’t print the mask but there shouldn’t be errors.
If you find any issue leave a comment. -
Repisa tipo cubo 3D Model
Repisa decorativa diseñada con mecanismo de encaje de piezas (no necesita tornillos) con medidas reales y lista para fabricar.
-
PIECES POUR AEP avec arduino nano (HOME-MADE) 3D Print Model
Summary
Quelques pièces pour fabriquer un allumage électronique programmable pour Véhicules anciens (A allumeur, et rupteur) -
Mechanical Cylinders 3D Model
Mechanical Cylinders to use as parts of mechs or on it’s own.There is a total of 9 mechanical cylinders.Each of the Cylinders is in Highpoly and 20% decimated.The package includes:- Zbrush of high-poly models with separated polygroups.- Zbrush of decimated models.- Max file containing highpoly models and render scene with Default Scanline.- OBJ high-poly cylinders.- OBJ decimated cylinders.Software versions used:- Zbrush 4R6- Max 2010- OBJPolygons:High-poly:cyl1 657532cyl2 2472166cyl3 122010…Decimated:cyl1 127728cyl2 489954cyl3 22962…
-
Damaged Asphalt 3D Model
Photo-scanned using 117 imagesProcessed in Reality CaptureModeled in Maya and ZBrushHighly detailed modelSize: X:517cm x Y:11cm x Z:281cmCentered on X,Y,Z axisHigh Resolution includes:-1 high resolution model (400,000 tris)-1 16k diffuse map (.tif)
-
45° angle transition pieces 3D Print Model
Summary
A couple different 45° angle transition pieces. I’d figure they’d have their uses. -
3D Bauhaus chess Game Schachspiel Free 3D Model
Bauhaus chess game designed by Josef Hartwig in 1923.3D model for Cinema 4D (+VRay opt.), other formats and textures included as listed.
-
3D model Rummy 3D Model
Rummy game objects (black, blue, red and yellow). Each card has its own name, according to its number and color.
-
Chess Set Gold And Silver 3D Model
2 Boards are included and 1 set of golden and 1 set of silver pieces
Textures are used for boards, not pieces
Names of materials are the same as names of textures
Enjoy!
