Built originally on the airframe of the F-8U Crusader, the A-7 underwent a number of modifications since its 1965 introduction. The A-7 Corsair II, which is retired, was used by TAC for close air support attack missions. The A-7E was the final fleet version of the A-7. After more than two decades of service, however, it was replaced by the F/A-18 Hornet.The A-7E had a 20mm gun and can carry payloads of up to 15,000 pounds of bombs and missiles. Eight ordnance stations were available. A-7E Corsair IIs were part of the two-carrier battle group that conducted a joint strike on selected Libyan terrorist-related targets in 1986. Together with carrier-based F/A-18s, A-7s used anti-radiation missiles to neutralize Libyan air defenses. F/A-18s replaced A-7Es in the carrier air wing mix. The last two squadrons transitioned in FY 1992. Replacing A-7s with F/A-18s gave operational commanders more flexibility by allowing them to employ the F/A-18s in either the fighter or attack role. Also, a smaller number of aircraft (85) are needed in an F/A-18 equipped carrier air wing than in an A-7E equipped carrier air wing (94).
Tag: phantom
-
A-7 3D Model
Built originally on the airframe of the F-8U Crusader, the A-7 underwent a number of modifications since its 1965 introduction. The A-7 Corsair II, which is retired, was used by TAC for close air support attack missions. The A-7E was the final fleet version of the A-7. After more than two decades of service, however, it was replaced by the F/A-18 Hornet.The A-7E had a 20mm gun and can carry payloads of up to 15,000 pounds of bombs and missiles. Eight ordnance stations were available. A-7E Corsair IIs were part of the two-carrier battle group that conducted a joint strike on selected Libyan terrorist-related targets in 1986. Together with carrier-based F/A-18s, A-7s used anti-radiation missiles to neutralize Libyan air defenses. F/A-18s replaced A-7Es in the carrier air wing mix. The last two squadrons transitioned in FY 1992. Replacing A-7s with F/A-18s gave operational commanders more flexibility by allowing them to employ the F/A-18s in either the fighter or attack role. Also, a smaller number of aircraft (85) are needed in an F/A-18 equipped carrier air wing than in an A-7E equipped carrier air wing.
-
F-4 3D Model
The F-4 Phantom II was a twin-engine, all-weather, fighter-bomber. The aircraft could perform three tactical air roles — air superiority, interdiction and close air support — as it did in southeast Asia. First flown in May 1958, the Phantom II originally was developed for U.S. Navy fleet defense and entered service in 1961. The USAF evaluated it for close air support, interdiction, and counter-air operations and, in 1962, approved a USAF version. The USAF’s Phantom II, designated F-4C, made its first flight on May 27, 1963. Production deliveries began in November 1963. In its air-to-ground role the F-4 could carry twice the normal bomb load of a WW II B-17. USAF F-4s also flew reconnaissance and “Wild Weasel” anti-aircraft missile suppression missions. Phantom II production ended in 1979 after over 5,000 had been built–more than 2,600 for the USAF, about 1,200 for the Navy and Marine Corps, and the rest for friendly foreign nations, including to Israel, Iran, Greece, Spain, Turkey, South Korea, West Germany, Australia, Japan, and Great Britain. Used extensively in the Vietnam War, later versions of the aircraft were still active in the U. S. Air Force inventory well into the 1990s. F-4s are no longer in the USAF inventory but are still flown by foreign nations. This texture is for U.S Air Force.
-
F-4E 3D Model
The F-4 was designed in 1958 as a company venture by McDonnell Douglas to meet future needs and it turned into the greatest post World War II fighter ever built. Considered by some the fastest, most versatile and effective aircraft ever built. The F-4 was initially designed as an attack bomber without internal weapons. The Phantom carried a greater bomb load than a B-29, yet was an effective fighter shooting down 106 out of 137 Migs destroyed in the Vietnam War. Israel has used F-4’s in all of its major confrontations, at one time shooting down over 70 Syrian aircraft without a Phantom lost. The F-4E was flown by the US Air Force Demonstration team The Thunderbirds from 1969 through the mid 1970’s. F-4E’s were also flown as aircraft known as Wild Weasels and were active in the Persian Gulf War.
-
McDonnell Douglas F-4 D Phantom Iranian Air Foprce scheme 3D Model
The F-4D joined combat forces in Southeast Asia in May 1967. The F-4D relegated most of the F-4Cs to the ground attack role while the F-4Ds were tasked with air to air interception duties. In addition to the AIM-7 Sparrow and AIM-9 Sidewinder, the F-4D was also capable of firing the Falcon missile. The Falson missile proved to be a failure, and after a brief trial period it was withdrawn from Vietnam combat service. The F-4 proved its worth in combat 05 June 1967, when a crew from the 555th Tactical Fighter Squadron downed a MiG-17 with an AIM-7 Sparrow missile. F-4Ds were the first aircraft to use laser guided munitions carrying GBU-1O/B Mk 84 Laser guided bombs in May 1968. USAF F-4s also flew reconnaissance and “Wild Weasel” anti-aircraft missile suppression missions.
-
McDonnell Douglas F-4 D Phantom USAF scheme 3D Model
The F-4D joined combat forces in Southeast Asia in May 1967. The F-4D relegated most of the F-4Cs to the ground attack role while the F-4Ds were tasked with air to air interception duties. In addition to the AIM-7 Sparrow and AIM-9 Sidewinder, the F-4D was also capable of firing the Falcon missile. The Falson missile proved to be a failure, and after a brief trial period it was withdrawn from Vietnam combat service. The F-4 proved its worth in combat 05 June 1967, when a crew from the 555th Tactical Fighter Squadron downed a MiG-17 with an AIM-7 Sparrow missile. F-4Ds were the first aircraft to use laser guided munitions carrying GBU-1O/B Mk 84 Laser guided bombs in May 1968. USAF F-4s also flew reconnaissance and “Wild Weasel” anti-aircraft missile suppression missions
-
McDonnell Douglas F-4 C Phantom Ala 12 scheme Spain 3D Model
The Phantom II was first developed for U.S. Navy fleet defense. The U. S. Air Force’s first version, the F-4C, made its first flight in May 1963, and production deliveries began soon after. In 1965, the U. S. Air Force sent its first F-4Cs to Southwest Asia where they flew air-to-air combat missions against North Vietnamese fighters. The aircraft carried out secondary mission of attacking key ground targets.In its air-to-ground role, the F-4C could carry twice the payload of a World War II B-17. The aircraft carries two external fuel tanks on the outboard pylons and one ALQ-87 electronic countermeasures (ECM) pod on the right inboard pylon. here comes with spanish scheme from Ala 12 in Torrejon (Madrid)
-
FPV Racing drone 3D Model
FPV Racing DroneA High polygon count 3D model of a FPV Racing drone, designed for use with in 3ds max with corona renderer.Poly-count: 124 759Vertex-count: 117 187This package contains following items:- One 3ds max file setup with corona renderer 2 plug-in (you need the plug-in in order to use this file properly)- One 3ds max file setup with Vray 3.6 plug-in (you need the plug-in in order to use this file properly)- One FBX file for import of the 3D models in all major 3D packages (no shaders).- One OBJ file for import of the 3D models in all major 3D packages (also no shaders).- One .3ds file for import of the 3D models in all major 3D packages (also no shaders).- High resolution Texture 8196 x 8196 px.Notes :- Preview images rendered in corona renderer 2, no color correction and no post production.- For best results, this model is recommended for use(render) on computers with at least 08 gigabytes of RAM.- Object is centered at (0,0,0).(!) Attention- the model is not rigged- the model is not suitable for 3D print- the scene setup / lighting / environments from the preview renders(rendered with Corona) are not included- the meshes are not suitable for subdivision, but this should not be necessary since they are already optimized for closeup beauty shots- it is an artistic representation of the subject, it is not 100% technically accurate, but still highly detailedFeel free to ask additional questions should you have any, (click the Author name on the left to enter his profile and then use the green contact button on the right to get to him).Thanks, and as usual, have fun!
-
DJI Phantom 4 Camera Drone 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
McDonnell Douglas F-4 Phantom II 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Phantom Aircraft 3D Model
Phantom Aircraft is low-poly 3d model ready for Virtual Reality (VR), Augmented Reality (AR), games and other real-time apps.Detailed Description Info:Model: Phantom AircraftMedia Type: 3D ModelGeometry: Quads/TrisPolygon Count: 41817 (Includes 4 Lods)Vertice Count: 25443 (Includes 4 Lods)Originally modeled in Autodesk Maya 2015. Final images rendered with Keyshot.The Autodesk Maya zip file contains Keyshot and standard materials scenes.Features:- High-quality polygonal model – correctly scaled accurate representation of the original objects.- Model resolutions are optimized for polygon efficiency.- All colors can be easily modified.- Model is fully textured with all materials applied.- All textures and materials are included and mapped in every format.- Autodesk Maya models grouped for easy selection & objects are logically named for ease of scene management.- No namespace issues when importing several models into a scene.- No cleaning up necessary, just drop model into your scene and start rendering.- No special plugin needed to open scene.PBR Textures formats:- Diffuse Map- Normal Map- AO Map- Specular Map- Color Map- Gloss Map- Emissive Map- Cavity MapResolution of textures is:- 2048 x 2048- 1024 x 1024- 256 x 256
-
Parrot Bebop Drone Red 3D Model
Parrot Bebop DroneThis3D Model created in 3ds Max 2011 & render to mental ray.Features:- High quality&high detailed, polygonal model- All colors& Texture can be easily modified because Include Orginal PSD File- Unwrap Full Model model- 2 Textures (.jpg) With PSD File includedTotal Poly Count :This 3D Model Contains 42861 Polygons, 43150 vertexes (Without Turbosmooth)This 3D Model Contains 139001 Polygons, 84758 vertexes (With Turbosmooth)Model exported toFile Formats:- 3ds Max 2011- FBX- OBJ- 3DS
-
Parrot Bebop Drone Yellow 3D Model
Parrot Bebop DroneDescription:This3D Model created in 3ds Max 2011 & render to mental ray.Features:- High quality & high detailed, polygonal model.- All colors & Texture can be easily modified because Include Original PSD File- Unwrap Full Model model- 2 Textures (.jpg) With PSD File includedTotal Poly Count :This 3D Model Contains 42861 Polygons, 43150 vertexes (Without Turbosmooth)This 3D Model Contains 139001 Polygons, 84758vertexes (With Turbosmooth)Model exported toFile Formats:- 3ds Max 2011- FBX- OBJ- 3DS
-
Dji Phantom 4 Pro – Element 3D 3D Model
This high quality 3d model for 3ds Max, Cinema 4D and Element 3D – DJI Phantom 4 Pro.Item included file scene with all light setups and materials. Just click the render button and you’ll get image like preview images .File formats:-.3ds(multi format)-.fbx (multi format)-.obj (multi format)-.c4d(Cinema 4D R15 and above)-.max(3ds Max 2014 and above)-.mb(Maya 2015 and above)-.e3d(plugin Element 3D v2.2 from Videocopilot)Features:- 3d model is completely ready for detailed and beautiful rendering and animation.- High-poly and low poly- Fully rigged- element 3d v2.2- The model have clean topology- All objects are separated and named- Suitable for close-up rendering- You can easily change or aply new materials, color and other.All parts of this model have been modelled separately to achieve as much realism as possible.It can be used as a production model without any requirement of additional modeling and texturing.Please font’t forget to rate this item if you liked him.Sincerely Yours,Cactus 3D Team
-
DJI Inspire – Element 3D 3D Model
This high quality 3d model for 3ds Max, Cinema 4D and Element 3D – DJI Inspire.Item included file scene with all light setups and materials. Just click the render button and you’ll get image like preview images .File formats:-.3ds(multi format)-.fbx (multi format)-.obj (multi format)-.c4d(Cinema 4D R15 and above)-.max(3ds Max 2014 and above)-.mb(Maya 2015 and above)-.e3d(plugin Element 3D v2.2 from Videocopilot)Features:- 3d model is completely ready for detailed and beautiful rendering and animation.- High-poly and low poly- Fully rigged- element 3d v2.2- The model have clean topology- All objects are separated and named- Suitable for close-up rendering- You can easily change or aply new materials, color and other.All parts of this model have been modelled separately to achieve as much realism as possible.It can be used as a production model without any requirement of additional modeling and texturing.Please font’t forget to rate this item if you liked him.Sincerely Yours,Cactus 3D Team
-
Devialet phantom speaker 3D Model
Realistic model speaker.modeled to real-world scale (mm)All materials and objects are properly named scene includes only the model with V-ray materials.The best sound in the world. Feel the physical impact of ultra-dense sound. Experience your music with the most extreme power, clarity and precision ever achieved. Breathtaking.
-
Rolls-Royce Phantom Mutec with HQ interior 2012 3D Model
The 3D model was created on real car base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* tire’s texture is not included in the set.* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
DJI Matrice 600 Pro 3D Model
Bee3dd is a team who making 3d model best quality, you don’t need worry when use our models. We take care to build the smallest detail in the model to ensure the best results. These things are not in others.Our slogan is: best quality – best price!+ We offer all electronics 3d model ( latest and oldest ). It is place where you can find anything about technology for your project ( earlier and faster than others )+ Every model we build goes through thorough Quality assessment both visual and technical to make sure the assets look realistic and the models are of the best quality.—————————–The model has a fully textured, detailed design that allows for close-up renders, and was originally modeled in 3ds Max 2012 and rendered with V-Ray. Fidelity is optimal up to a 2K render. Renders have no postprocessing.—————————–File Formats:+ 3ds Max 2012 + Vray 2.0 full setup lighting, camera+ 3ds Max 2012 standard+ Cinema 4D R12 standard ( materials and textures was setup )+ Maya 2012 standard ( materials and textures was setup )+ Lightwave 11 ( materials and textures was setup )+ FBX 2012+ OBJ 2012+ 3DS 2012—————————–Features:+ No isolated vertices+ No coincident vertices+ No coincident/coplanar faces+ Quads and Triangles only ( Clean edge flow, mostly quads, subdividable topology, no poles with more than 5 edges on the model, holding/support edges present to retain shape after subdivision )+ Models resolutions are optimized for polygon efficiency. (In 3ds Max, the Meshsmooth/Turbosmooth function can be used to increase mesh resolution if necessary.)+ Real-world scale ( We make 3d model from actual size and images reference. It is best for making video intro, marketing, animation, games… )+ Naming and Organization ( All geometry is contained in a single layer structure, with the layer having the same name as the product. )+ No special plugin needed to open scene.+ 3ds Max models are grouped for easy selection, and objects are logically named for ease of scene management.—————————–TEXTURES:- Textures highquality, enough for close-up render ( 2048-4096 pixels )- UVWs mapping with mixed: overlapping and non-overlapping- No texture paths referenced by the model. All texture paths were stripped from the model.—————————–Rate for ours models: We are required to assess the customer’s finished product with the best quality. Let us know your comments, we are very thankful for that!Thanks you,Best regardBee3dd team
-
DJI Phantom 3 Professional 3D Model
The 3d model based on a real
photo camera, created according to the original dimensions.
All main parts of the model are separated objects. Therefore, you can easy change all materials. We provide several formats for each model, most of them available by default.
* images rendered with using V-Ray plugin (we don’t include lighting and environment to a set). -
OctoCopter DJI matrice 600 pro Vray 3D Model
The model is completely ready for use visualization in 3ds max.All previews rendered in 3ds max Vray.
-
Pfantom XT 3D Model
Full copy of “Pfantom XT”.The rights for original model which is only in a game belong to FishLabs.I have made only the copy according to sketches.I apologize, for the awful translation.It’s Fun model.Полная копия “Pfantom XT”.Права на оригинальную модель, которая находится только в игре принадлежат FishLabs.Я сделал всего лишь копию по скетчам.Это фан модель.
-
E3D – DJI Spark Mini Drone 2017 3D model 3D Model
This pack:Element 3D V2.2 ( All colors )models preset easy to use- 1 file OBJ High poly- 1 file OBJ standard- 1 file C4D R12 standard render- 1 file 3ds max 2012 standard material- E3D file full materials set up like previewsHow to use it?1. Open After Effects CC 2014 ( or higher) and create new composition ( You need Element3D V2.2 to use )2. Create new Solid layer and add Element effect. ( Effect/Video Copilot/ Element )3. Click Scene Setup4. Click on IMPORT inside Element3D scene setup5. Choose my .e3d preset for the model and press Open.If you dont see the model do not forget to right click on the model name and press Replace model then select the .obj model file in the respective models folder.
-
E3D – DJI Phantom 4 PRO 3D model 3D Model
This pack:Element 3D V2.2 ( All colors )models preset easy to use- 1 file OBJ High poly- 1 file OBJ standard- 1 file C4D R12 standard render- 1 file 3ds max 2012 standard material- E3D file full materials set up like previewsHow to use it?1. Open After Effects CC 2014 ( or higher) and create new composition ( You need Element3D V2.2 to use )2. Create new Solid layer and add Element effect. ( Effect/Video Copilot/ Element )3. Click Scene Setup4. Click on IMPORT inside Element3D scene setup5. Choose my .e3d preset for the model and press Open.If you dont see the model do not forget to right click on the model name and press Replace model then select the .obj model file in the respective models folder.
-
DRONE DJI PHANTOM 3 PRO 3D Model
This is the high quality photo real 3d model of DJI PHANTOM 3 PRO and its Remote Controller.This model is made in Autodesk Maya and is suitable for Commercials, Visual Effects, and Games. The model has enogh details for Hiero shots Close up renders and all kind of Foreground and Background shots since all the parts have an Open Subdivision Attribute which you can activate as preferred.********************************************************************Features:-The models are in correct real world scale and all in polygonal Quads.-As i mention earlier the models use Open Subdivs.-Textures 2K, 4K. All textures tiff format.Most of the 16Bit.- files with the model does not contain unnecessary objects (left objects, cameras, etc.)-All previews rendered Maya Vray.-Original file format Maya 2015 with Vray 3.01.-Other files Fbx 2006, Fbx 2009, Obj, Stl for 3dPrint.The Fbx 2006 use Asci and it can open in every older 3d Programs.-Textures also icluded in separate file.
-
E3D – GoPro Hero 5 Black 3D Model
This pack:Element 3D V2.2 ( All colors )models preset easy to use- 1 file OBJ High poly- 1 file OBJ standard- 1 file C4D R12 standard render- 1 file 3ds max 2012 standard material- E3D file full materials set up like previewsHow to use it?1. Open After Effects CC 2014 ( or higher) and create new composition ( You need Element3D V2.2 to use )2. Create new Solid layer and add Element effect. ( Effect/Video Copilot/ Element )3. Click Scene Setup4. Click on IMPORT inside Element3D scene setup5. Choose my .e3d preset for the model and press Open.If you dont see the model do not forget to right click on the model name and press Replace model then select the .obj model file in the respective models folder.
-
Filters (37mm) and Adapter box for DJI Phantom 3 Standard
Summary
This box is to hold a set of 37mm filters and adapter for my DJI Phantom 3 Standard. The sets come with an adapter and four filters UV, ND4, ND8 and CPL with thickness 6mm, 6.5mm, 6.5mm and 8 mm respectively.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
No Resolution:
0.2 Infill:
15% -
Nautilus for Drone Phantom 2-3 DJI 3D Model
“Nautilus” is an accessory for the Phantom 2/3
It is composed of four “hooks” adjustable, that connect the legs of the drone with a standard plastic bottle ( PET 1.5 / 2 L), which can be fixed with a rubber band.
Essentially this accessory is multifunctional: floating drone and is also suitable as an extension of the original legs for transporting material,
The price is for single piece To improve security you may want to also use the electrician’s attachment clamps.
