3DHunt.co

Tag: NELO

  • NELO rudder cover 3D Print Model

    NELO rudder cover 3D Print Model

    Summary
    This replaces the original NELO rudder cover. No need to, but I plan to put a GoPro connector on this later.
    Printing:
    I don’t remember if I had to print this at 102% or similar to reach proper size, so you will have to test 😉
    Post-print:
    To fit, this needs to be bent a little. Just heat it with a hairdryer and slightly bend by hand so it has the required curve.
    Print Settings
    Printer:
    Zonestar 802P Rafts:
    No Resolution:
    0.2 Infill:
    20-30% will do. Notes:
    I don’t remember if I had to print this at 102% or similar to reach proper size, so you will have to test 😉
    Post-Printing
    To fit, this needs to be bent a little. Just heat it with a hairdryer and slightly bend by hand so it has the required curve.
    How I Designed This
    I used 123d designer. File included. Improve if you need, but don’t sell commercially!