CH-47 Chinook cargo/transport helicopter for USFS
Tag: NATO
-
Sea King HAR3A 3D Model
The Westland Sea King HAR3 entered RAF service in 1978 and the 3A in 1996; both marks of aircraft are used in the Search and Rescue (SAR) role. The aircraft are operated from six locations around the UK, with each location supporting two aircraft. There is also a detachment of two HAR3s providing SAR cover in the Falkland Islands. The SAR squadrons provide 24-hour cover around the UK and the Falkland Islands throughout each year. Each squadron maintains a 15-minutes readiness state during daylight hours and a 45-minutes readiness state during the hours of darkness.
-
Follow Me Jeep Willys MB 3D Model
Follow Me jeeps were jeeps that were used at airfields to help control ground traffic of airplanes at an air base. Follow Me jeeps used close to the front remained the normal olive drab paint color, but at bases farther to the rear, the jeeps became brightly colored. This is a Follow Me Jeep Willys MB.
-
F-5 3D Model
F-5 Freedom Fighter, a 1960s US jet fighter produced for export. This texture is for Austria Air Force.
-
NATO aircraft shelter 3D Model
The shelter or NATO classification HAS (hardend aircraft shelter) is, according to official language, a buliding for proceting aircraft made of thick, reinforced concrete walls for single combat aircraft. Please note the typhoon is not included.
-
Humrqaam 3D Model
HUMRAAM is an advanced air-defense guided-missile-system launcher combining five of Raytheon’s combat-proven AMRAAM missiles on the High Mobility Multipurpose Wheeled Vehicle (HMMWV). This low-cost, high-reliability launcher provides high firepower, fire-and-forget, non-line-of-sight engagement of tactical aircraft, cruise missiles and unmanned aerial vehicles that threaten forward-maneuver forces, critical assets and vital areas, such as White House or Olympic Games.Actually, Raytheon official supplied it to 2004 Athens Olympic. Raytheon developed the HUMRAAM concept in cooperation with the US Army Aviation and Missile Command, the US Marine Corps Systems Command and Counter Air Joint Systems Project Office as a near term expeditionary air defense system.
-
Outer Loader Trailer 3D Model
This outer loader trailer can be used for carrying bombs and missiles.
-
Steinbock Lifting Machine 3D Model
The Steinbock lifting machine moves exterior tanks and weapons on the pylons. Please note the aircraft is not included.
-
H2987 Sun Electric Systems 3D Model
H2987 Sun Electric Systems- All the hydraulic functions on the aircraft can be checked using this set. A-10 is not included.
-
Nato aircraft ground support component 3D Model
It’s one of the most important component among group support equipments which is used to hoist missiles. Please note the aircraft is not included.
-
Engin Starter 3D Model
The starter unit (30 kVA) is indispensable for each jet engin beam, and these can be removed and refitted using the component crane. The A-10 is not included.
-
A-M32A-60A Generator Set 3D Model
A/M32A-60A Generator Set – Provides external power and high pressure air for starting jet and turboprop aircraft. The A-10 is not included.
-
M1A2 Abrams with Mine Trawl 3D Model
Polygons:762717Verticles:519562This time I present to you the detailed model of the US Main Battle Tank Abrams with mine trawl. The model has fine PBR textures, and the body and triplex have a 4k size and everything else is 2k. In the kit there is also a HDRI map of 8k and two variants of camouflage.
-
Bullet Rifle 3D Model
bullet rifle sniper weapon gun pistol ammunition ammo projectile magazine shell caliber heavy military army NATO US 3d vray model realistic
-
Nato Flag 3D Model
Nato FlagNato Flag 3D Model Created in 3ds Max 2011 and rendered with mental ray.File Formats:-3ds Max 2011-3ds-fbx-objTotal Poly Count :Total polygons counts : 412Total vertex count : 282
-
Bullet Rifle 3D Model
bullet rifle sniper weapon gun pistol ammunition ammo projectile magazine shell caliber heavy military army NATO US 3d vray model realistic
-
Combat Helmet Ballistic 3D Model
combat helmet ballistic army soldier military police uniform armor camouflage NATO marines war vision equipment wear clothing warrior force head helm
-
Aircraft Missile AIM-9M Sidewinder 3D Model
Aircraft Missile AIM-9M Sidewinder gunship carrier fighter NATO bomb destroy marine air force rocket army military weapon US Navy
-
AT4-CS 3D Model
Sale!!!!!!!!!!Sale!!!!!!!!!!Sale!!!!!!!!!!Sale!!!!!!!!!!Need money for surgery urgently!Buy please something!Donat: PayPal aleck.sawkin2016@gmail.comSale!!!!!!!!!!Sale!!!!!!!!!!Sale!!!!!!!!!!Sale!!!!!!!!!!Need money for surgery urgently!Buy please something!Donat: PayPal aleck.sawkin2016@gmail.comSale!!!!!!!!!!Sale!!!!!!!!!!Sale!!!!!!!!!!Sale!!!!!!!!!!Need money for surgery urgently!Buy please something!Donat: PayPal aleck.sawkin2016@gmail.comSale!!!!!!!!!!Sale!!!!!!!!!!Sale!!!!!!!!!!Sale!!!!!!!!!!Need money for surgery urgently!Buy please something!Donat: PayPal aleck.sawkin2016@gmail.com
-
Challenger 2 3D Model
Polygons:90393Verticles:202573Used 2 k PBR textures.The FV4034 Challenger 2 is a British main battle tank (MBT) in service with the armies of the United Kingdom and Oman. It was designed and built by the British company Vickers Defence Systems (now known as BAE Systems Land & Armaments).Vickers Defence Systems began to develop a successor to Challenger 1 as a private venture in 1986. A £90 million deal for a demonstrator vehicle was finalised in January 1989. In June 1991, the Ministry of Defence placed a £520 million order for 140 vehicles, with a further 268 ordered in 1994. Production began in 1993 and the unit’s tanks were delivered in July 1994, replacing the Challenger 1. The tank entered service with the British Army in 1998, with the last delivered in 2002. It is expected to remain in service until 2035. The Royal Army of Oman ordered 18 Challenger 2s in 1993 and a further 20 tanks in November 1997.
-
Humvee M1151 Enhanced Armament 3D Model
Humvee M1151 hmmwv Carrier military armored vehicle army american war hummer car jeep transport nato armed defense truck usa auto gun
-
556X45mm Nato Bullet 1 3D Model
This is a model of a 5.56X45mm Nato Bullet.Originally created with Blender 2.79.|| USAGE ||This model is suitable for use in broadcast, high-res film close-up, advertising, design visualization etc.|| SPECS ||This model contains 3 separate objects.This model is intended for subdivision.This model contains-Subdivision level 0 – 768 polygons.-Subdivision level 1 – 3072 polygons.-Subdivision level 2 – 12288 polygons.This model contains Blender Cycles materials.|| PRESENTATION IMAGES ||All preview images are rendered with Blender Cycles Renderer.Uses subdivision level 2 model.Product is ready to render.Render setup is included as a separate Blender file, which is needed to produce images that match the thumbnails.|| TEXTURES ||Textures have 16 bits per channel.5.56x45mm_Nato_Bullet_1_BaseColor.png 1024×1024.5.56x45mm_Nato_Bullet_1_Metallic.png 1024×1024.5.56x45mm_Nato_Bullet_1_Normal.png 1024×1024 X+Y-Z+.5.56x45mm_Nato_Bullet_1_Roughness.png 1024×1024.|| GENERAL ||Model is built to real-world scale(the unit system is metric).No third-party renderer or plug-ins needed.|| ADDITIONAL NOTES ||Other file formats (subdivision level 0 model included). May be needed to reassign materials and will not render like the preview images.-FBX-OBJ
-
Beretta ARX-160 3D Model
Used 2 k PBR textures.The Beretta ARX160 is an Italian modular assault rifle manufactured by Beretta. Developed for the Italian Armed Forces as part of the Soldato Futuro (English: “Future Soldier”) program, the ARX160 was launched in 2008 as a commercial weapon system independent from the Soldato Futuro ensemble, complete with a companion single-shot 40×46mm NATO low-velocity grenade launcher, called the GLX160, which can be mounted underneath the rifle or used with an ad hoc stock system as a stand-alone weapon.In late 2015, Beretta introduced the Beretta ARX200 7.62×51mm NATO battle rifle which is a derivative of the ARX160. The Italian Army is planning to introduce two configurations of the ARX200; a battle rifle with a foldable telescoping stock and a designated marksman rifle (DMR) with a fixed-stock.
-
FN SCAR-L 3D Model
Hellow!Today i present you my new high polygonal model.Used 2 k PBR high quality textures.The FN SCAR (Fabrique Nationale Special Operations Forces Combat Assault Rifle)[9] is a gas-operated (short-stroke gas piston)[8] self-loading rifle with a rotating bolt.[10] It is constructed to be extremely modular, including barrel change to switch between calibers. The rifle was developed by FN Herstal (FNH) for the United States Special Operations Command (SOCOM) to satisfy the requirements of the SCAR competition.[11] This family of rifles consist of two main types. The SCAR-L, for “light”, is chambered in 5.56×45mm NATO cartridge and the SCAR-H, for “heavy”, is chambered in 7.62×51mm NATO. Both are available in Close Quarters Combat (CQC), Standard (STD) and Long Barrel (LB) variants.
-
A-91 Bullpup 3D Model
Used 2 k PBR textures.The A-91 bullpup assault rifle (also known as A-91M) was developed during the 1990s by KBP Instrument Design Bureau in Tula, as an offspring of the A-91 family of compact assault rifles described in the 9A-91 article. While the A-91 retains the basic gas-operated, rotating bolt action and a trigger unit design from 9A-91, it features a bullpup polymer housing, with an integral 40 mm single-shot grenade launcher mounted under the barrel. The earliest prototypes of the A-91 bullpup were fitted with the grenade launcher above the barrel, and with a front vertical foregrip; current models are fitted with the underbarrel launcher, which also serves as a forearm. The A-91 features a forward ejection system, initially developed in Tula by designers like Afanasiev during the early 1960s. In this system, the ejection port is located above the pistol grip, and points forward. Extracted cases are fed from bolt head through the short ejection tube to the ejection port, and fall out of the gun well clear of the shooter’s face, even when firing from the left shoulder. As for now, the A-91 is made in small number and, probably, is used by some elite law enforcement units in Russia; it is also offered for export and domestic military and police sales.
-
Lockheed Martin F-35 Lighting 3D Model
In this project i use 4 k textures.The Lockheed Martin F-35 Lightning II is a family of single-seat, single-engine, all-weather stealth multirole fighters. The fifth-generation combat aircraft is designed to perform ground attack and air superiority missions. It has three main models: the F-35A conventional takeoff and landing (CTOL) variant, the F-35B short take-off and vertical-landing (STOVL) variant, and the F-35C carrier-based Catapult Assisted Take-Off But Arrested Recovery (CATOBAR) variant. On 31 July 2015, the United States Marines declared ready for deployment the first squadron of F-35B fighters after intensive testing. On 2 August 2016, the U.S. Air Force declared its first squadron of F-35A fighters combat-ready.The F-35 descends from the X-35, the winning design of the Joint Strike Fighter (JSF) program. An aerospace industry team led by Lockheed Martin designed and manufactures it. Other major F-35 industry partners include Northrop Grumman, Pratt & Whitney and BAE Systems. The F-35 first flew on 15 December 2006. The United States plans to buy 2,663 aircraft. Its variants are to provide the bulk of the crewed tactical airpower of the U.S. Air Force, Navy and the Marine Corps over the coming decades. Deliveries of the F-35 for the U.S. military are scheduled until 2037 with a projected service life up to 2070.
-
Tactical Combat Bomber 3D Model
I presen you my new model Tactical Combat Bomber.Used 4 k textures. Thank you for watching.
-
Lockheed Martin F-22 Raptor 3D Model
Used 4 k textures.The Lockheed Martin F-22 Raptor is a fifth-generation, single-seat, twin-engine, all-weather stealth tactical fighter aircraft developed for the United States Air Force (USAF). The result of the USAF’s Advanced Tactical Fighter program, the aircraft was designed primarily as an air superiority fighter, but also has ground attack, electronic warfare, and signal intelligence capabilities. The prime contractor, Lockheed Martin, built most of the F-22’s airframe and weapons systems and conducted final assembly, while Boeing provided the wings, aft fuselage, avionics integration, and training systems.The aircraft was variously designated F-22 and F/A-22 before it formally entered service in December 2005 as the F-22A. After a protracted development and despite operational issues, the USAF considers the F-22 critical to its tactical air power, and says that the aircraft is unmatched by any known or projected fighter. The Raptor’s combination of stealth, aerodynamic performance, and situational awareness gives the aircraft unprecedented air combat capabilities.The high cost of the aircraft, a lack of clear air-to-air missions due to delays in Russian and Chinese fighter programs, a ban on exports, and development of the more versatile F-35 led to the end of F-22 production.[N 1] A final procurement tally of 187 operational production aircraft was established in 2009, and the last F-22 was delivered to the USAF in 2012.
-
McDonnell Douglas FA-18 3D Model
Used 4 k textures.The McDonnell Douglas F/A-18 Hornet is a twin-engine supersonic, all-weather carrier-capable multirole combat jet, designed as both a fighter and attack aircraft (hence the F/A designation). Designed by McDonnell Douglas (now Boeing) and Northrop, the F/A-18 was derived from the latter’s YF-17 in the 1970s for use by the United States Navy and Marine Corps. The Hornet is also used by the air forces of several other nations and, since 1986, by the U.S. Navy’s Flight Demonstration Squadron, the Blue Angels.The F/A-18 has a top speed of Mach 1.8 (1,034 knots, 1,190 mph or 1,915 km/h at 40,000 ft or 12,200 m). It can carry a wide variety of bombs and missiles, including air-to-air and air-to-ground, supplemented by the 20-mm M61 Vulcan cannon. It is powered by two General Electric F404 turbofan engines, which give the aircraft a high thrust-to-weight ratio. The F/A-18 has excellent aerodynamic characteristics, primarily attributed to its leading-edge extensions. The fighter’s primary missions are fighter escort, fleet air defense, Suppression of Enemy Air Defenses (SEAD), air interdiction, close air support, and aerial reconnaissance. Its versatility and reliability have proven it to be a valuable carrier asset, though it has been criticized for its lack of range and payload compared to its earlier contemporaries, such as the Grumman F-14 Tomcat in the fighter and strike fighter role, and the Grumman A-6 Intruder and LTV A-7 Corsair II in the attack role.The Hornet first saw combat action during the 1986 United States bombing of Libya and subsequently participated in the 1991 Gulf War and 2003 Iraq War. The F/A-18 Hornet provided the baseline design for the Boeing F/A-18E/F Super Hornet, its larger, evolutionary redesign.
-
Leopard tank 3D Model
Used PBR materials 2048×2048.The Leopard (or Leopard 1) is a main battle tank designed and produced in West Germany that first entered service in 1965. Developed in an era when HEAT warheads were thought to make conventional heavy armour of limited value, the Leopard focused on firepower in the form of the German-built version of the British L7 105-mm gun, and improved cross-country performance that was unmatched by other designs of the era.The design started as a collaborative project during the 1950s between West Germany and France and later joined by Italy, but the partnership ended shortly after and the final design was ordered by the Bundeswehr, with full-scale production starting in 1965. In total, 6,485 Leopard tanks have been built, of which 4,744 were battle tanks and 1,741 were utility and anti-aircraft variants, not including 80 prototypes and pre-series vehicles.The Leopard quickly became a standard of European forces, and eventually served as the main battle tank in over a dozen countries worldwide. Since 1990, the Leopard 1 has gradually been relegated to secondary roles in most armies. In the German Army, the Leopard 1 MBTs were phased out in 2003, while Leopard 1 derived vehicles are still widely used. The Leopard 2 MBTs have taken over the MBT role. Leopard hulls have been re-used in a wide variety of roles.
-
Challenger-1 3D Model
Hellow!In this project i use 4096×4096 textures(Base color,Roughnes,Height,Normals maps).Very fast render.Brief information:The FV4030/4 Challenger 1 is a British main battle tank (MBT) used by the British Army from 1983 to the mid-1990s, when it was superseded by the Challenger 2. It is also currently used by the Royal Jordanian Army as its main battle tank after heavy modifications. The variants for the Jordanian military are to be upgraded using the unmanned Falcon turret.
-
French Tank AMX-30 3D Model
Tank AMX-30 AMX30 AMX 30 main battle mbt French military armored vehicle army NATO heavy weapon rigged rig gun defense cannon force light armed
-
Iver Huitfeldt Frigate LOD 1 3D Model
Frigate Iver Huitfeldt F361 Royal Danish Navy War Warship Class HDMS SAM ASW Baltic NATO Sim Ship Boat LOD Game Lowpoly Low Poly Level of Detail WEU DEMORA
-
SSGN-728 USS Florida 3D Model
USS SSGN-728 Florida Michigan Ohio Georgia class submarine ssn nuclear missile torpedo warfare usn navy sub us nato watercraft ship boat
-
Iver Huitfeldt Frigate LOD 3D Model
Frigate Iver Huitfeldt F361 Royal Danish Navy War Warship Class HDMS SAM ASW Baltic NATO Sim Ship Boat LOD Game Lowpoly Low Poly Level of Detail WEU DEMORA
-
Russian Attack Helicopter Kamov KA 52 3D Model
Russian Attack Helicopter Kamov KA 52 rigged black shark Chornaya Akula nato hokum A coaxial rotor progress scout army helo chopper
-
EA-6B Prowler VAQ-132 Scorpions CAG 3D Model
EA-6B A-6 vaq Prowler navy jet aircraft airplane plane nato US weapon bomb gun electronic warfare marine fly air carrier radar 3d model
-
MEADS launcher 3D Model
The Medium Extended Air Defense System (MEADS) is a ground-mobile air and missile defense system intended to replace the Patriot missile system through a NATO-managed development. The program is a tri-national development of the US, Germany, and Italy.
-
XM29 OICW 3D Model
Highly detailed, low-poly, fully textures, game-ready model of XM29 OICW rifleThe XM29 OICW (Objective Individual Combat Weapon) was a series of prototypes of a new type of assault rifleThe XM-29 is a combination weapon, which has the 20mm semi-automatic, magazine grenade launcher as its primary part, and the 5.56mm compact assault rifle as its secondary part. Both parts are assembled into the single one-man portable unit, with the addition of the target acquisition / fire control system (TA/FCS), which is an essential part of the whole system.Scene Totals:- XM29 OICW- Grenade Magazine 20×28 mm grenade- Magazine 5.56x45mm cartrigePBR Textures: Base color, normal, metalness, roughness, ambient occlussion, 4096*4096 in TGA formatPreview were rendered vith Marmoset 3, not included
-
Assault Rifle FN SCAR 3D Model
Assault Rifle FN SCARReady to RENDER. HDRI map includedHigh quality model for TurboSmoothOriginally created with 3ds Max 2014Model supports VRay RenderThere is light in the scene VRay DomeIncludes high-resolution texturesFormats include FBX and OBJ (not smoothed)[ USAGE ]- This model is suitable for use in broadcast, high-res films, advertising, design visualization, forensic presentation, etc- The model is accurate with the real world size and scale[ GENERAL ]- Model is built to real-world scale – Units used: mm- Scene objects are organized by groups- No third-party renderer or plug-ins[GEOMETRY]Polygons: 74215 Vertices: 75405[TEXTURE ]High-resolution textures number: 124 texture size: 4096×40968 texture size: 8192×8192[ ADDITIONAL NOTES ]- File formats other than 3ds Max exported as base mesh (not smoothed)*If you have any questions, you can contact me through support. Just send a support ticket! *
-
Assault Rifle SCAR 3D model 3D Model
SCAR RifleReady to RENDER. HDRI map includedHigh quality model for TurboSmoothOriginally created with 3ds Max 2014Model supports VRay RenderThere is light in the scene VRay DomeIncludes high-resolution texturesFormats include FBX and OBJ (not smoothed)[ USAGE ]- This model is suitable for use in broadcast, high-res films, advertising, design visualization, forensic presentation, etc- The model is accurate with the real world size and scale[ GENERAL ]- Model is built to real-world scale – Units used: mm- Scene objects are organized by groups- No third-party renderer or plug-ins[GEOMETRY]Polygons: 60242Vertices: 61300[TEXTURE ]High-resolution textures number: 84 texture size: 4096×40964 texture size: 8192×8192[ ADDITIONAL NOTES ]- File formats other than 3ds Max exported as base mesh (not smoothed)*If you have any questions, you can contact me through support. Just send a support ticket! *
-
Assault Rifle FAMAS F1 3D model 3D Model
Assault Rifle FAMAS F1 is a high quality, photo real model that will enhance detail and realism to any of your rendering projects. The model has a fully textured, detailed design that allows for close-up renders, and was originally modeled in 3ds Max 2012 and rendered with V-Ray. Fidelity is optimal up to a 2k render. Renders have no postprocessing.Hope you like it!*********************************Features:- High quality polygonal model, correctly scaled for an accurate representation of the original object.- Models resolutions are optimized for polygon efficiency. (In 3ds Max, the Meshsmooth function can be used to increase mesh resolution if necessary.)- All colors can be easily modified.- Model is fully textured with all materials applied.- All textures and materials are included and mapped in every format.- 3ds Max models are grouped for easy selection, and objects are logically named for ease of scene management.- No part-name confusion when importing several models into a scene.- No cleaning up necessaryjust drop your models into the scene and start rendering.- No special plugin needed to open scene.- Model does not include any backgrounds or scenes used in preview images.- Units: cm*********************************File Formats:- 3ds Max 2012 V-Ray and standard materials scenes- OBJ (Multi Format)- 3DS (Multi Format)- Maya 2011- Cinema 4D R14- FBX (Multi Format)*********************************Textures Formats:- (10 .png) 4096 x 4096- (5 .png) 2048 x 2048*********************************3d Molier International is a team of 3D artists with over a decade of experience in the field. The company participated in various projects allowing us to learn our clients needs. Every model we build goes through thorough Quality assessment both visual and technical to make sure the assets look realistic and the models are of the best quality, which you can tell by looking at the renders none of the has any postprocessing. On the top of that all the models come with complete UVs and optimized topology, which allows you in no time alter geo or the textures if needed.Also check out our other models, just click on our user name to see complete gallery. 3d_molier International 2017
-
3D Stoner 63a LMG model 3D Model
Stoner 63a LMG is a high quality, low poly asset originally modeled in 3DS Max 2018. The normal map was baked from a high poly model, making this product look very detailed without using many polygons. This product is intended for game/real time/background use. This model is not intended for subdivision.Renders done in Marmoset Toolbag 3. Default renders in 3ds Max will NOT look like the preview images. The Marmoset Toolbag scene IS included.||SPECS||Low Poly ModelThe weapon is separated into objects to make animation easier. They are arranged in the following hierarchy:-63a_lmg -belt -bipod -bipod_extension_left -bipod_extension_right -charginghandle -feed_chute_cover -feed_tray -magazine -magazine_cover -top_cover -rear_sight -rear_sight_elevation -trigger-magazine_rounds|| Geometry ||Geometry count:The geometry has been triangulated to ensure it shades as accurately as possible in game engines. So the polygon count and triangle count are the same.63a LMG with ammunition belt:-38,828 tris-20,307 vertsWithout ammunition belt:-33,912 tris-17,734 vertsBipod and can be removed and bipod legs are extendable.The cartridge model is made so that you can delete the bullet, leaving just the shell. This could be useful if you want to have ejected shell effects.Polygons are all quads or tris, no n-gonsModel unwrapped manually to make most efficient use of the UV space.All materials and objects named appropriatelyScaled to approximate real world size (inches)Weapon Dimensions: 40”x10”x11”Tested in Marmoset Toolbag 3 (see renders)Tested in Unreal Engine 4Tested in Unity Engine 5No special plugins needed. .obj and .fbx versions exported from 3ds Max 2018|| Textures ||63a LMG: 4096×4096 base color, roughness, metalness, normal and AO (ambient occlusion) mapsMagazine interior belt: 1024×1024 PBR textures.5.56 Cartridge: 512×512 PBR textures.There is a separate download of the textures in specular/gloss PBR format for those who prefer that setup.Textures designed for physically based rendering (PBR)Textures in .tga formatModel texture paths are strippedI have exported specialized texture maps for Unreal Engine 4 and Unity 5. See the extra downloads section for those textures and instructions on using them.++ BONUS ++The high poly model used to bake texture maps is also available for download. (3ds Max 2018)* Unfortunately there’s no universal standard for normal map orientation between game engines. If the normals don’t look correct try inverting the green channel of the normal map in an image editor.
-
Oshkosh M-ATV Medical Vehicle 3D model 3D Model
Oshkosh M-ATV Medical Vehicle is a high quality, photo real model that will enhance detail and realism to any of your rendering projects. With detailed interior. Doors can be opened. The model has a fully textured, detailed design that allows for close-up renders, and was originally modeled in 3ds Max 2012 and rendered with V-Ray. Fidelity is optimal up to a 2k render. Renders have no postprocessing.Hope you like it!Oshkosh M-ATV Medical Vehicle is ready to be animated. You can easily position it the way you need or animate.*********************************Features:- High quality polygonal model, correctly scaled for an accurate representation of the original object.- Models resolutions are optimized for polygon efficiency. (In 3ds Max, the Meshsmooth function can be used to increase mesh resolution if necessary.)- All colors can be easily modified.- Model is fully textured with all materials applied.- All textures and materials are included and mapped in every format.- 3ds Max models are grouped for easy selection, and objects are logically named for ease of scene management.- No part-name confusion when importing several models into a scene.- No cleaning up necessaryjust drop your models into the scene and start rendering.- No special plugin needed to open scene.- Model does not include any backgrounds or scenes used in preview images.- Units: cm*********************************File Formats:- 3ds Max 2012 V-Ray and standard materials scenes- OBJ (Multi Format)- 3DS (Multi Format)- Maya 2011- Cinema 4D R14- FBX (Multi Format)*********************************Textures Formats:- (14 .png) 4096 x 4096*********************************3d Molier International is a team of 3D artists with over a decade of experience in the field. The company participated in various projects allowing us to learn our clients needs. Every model we build goes through thorough Quality assessment both visual and technical to make sure the assets look realistic and the models are of the best quality, which you can tell by looking at the renders none of the has any postprocessing. On the top of that all the models come with complete UVs and optimized topology, which allows you in no time alter geo or the textures if needed.Also check out our other models, just click on our user name to see complete gallery. 3d_molier International 2017
-
3D GIRAFFE AMB Radar 3D Model
Low-poly, game-ready 3d model of GIRAFFE AMB Radar.Clean modeling, UV, and texturing.Correct naming of objects and materials.No random vertices or ngons.Triangle count – 2488.Textures:GIRAFFE_BODY.bmp 2048 x 2048GIRAFFE_RADAR.bmp 1024 x 1024Diffuse only.Made and rendered in 3ds Max 2012 with V-Ray 2.20.02.Rendered with flat materials.The native format is ready to render.No additional plugin is needed.
-
GIRAFFE AMB Radar 3D model 3D Model
Low-poly, game-ready 3d model of GIRAFFE AMB Radar.Clean modeling, UV, and texturing.Correct naming of objects and materials.No random vertices or ngons.Triangle count – 18151.Textures:GIRAFFE_BODY.bmp 2048 x 2048GIRAFFE_RADAR.bmp 1024 x 1024Diffuse only.Made and rendered in 3ds Max 2012 with V-Ray 2.20.02.Rendered with flat materials.The native format is ready to render.No additional plugin is needed.
-
Visby Class Corvette 3D Model
Low-poly 3d model of Visby Class Corvette military ship.Clean modeling, UV, and texturing.Correct naming of objects and materials.No random vertices or ngons.Triangle count – 975.Textures:VISBY_COLOR.png 2048x2048Diffuse only.Made and rendered in 3ds Max 2012 with V-Ray 2.20.02.The native format is ready to render.No additional plugin is needed.
-
FN P 90 3D Model
High quality 3d model FN P-90 Project 1990 + Laser Sights & Collimator sight
Texturex: 2048×2048
Normal, Diffuse, Specular -
3D agm-114 Hellfire
Aircraft Missile AGM-114 hellfire is a high quality model.Fully detailed, textured model. Detailed for close-up renders.Comes with detailed texture(4096×4096).Final images rendered with vray and element 3d(Specially optimized). No special plugin needed to open scene. All textures and materials are included and mapped.The 3ds max zip file contains also vray and standard materials scenes.The models are made with much attention to details. They have a reasonable amount of polygons and accurate grids.Available formats:*.max Scanline – with Standard materials for 3ds max 2013 or higher*.max V-Ray – with materials for V-ray*.fbx – with mapping without materials*.obj – with mapping without materials*.obj – Specially optimized for element 3d*.e3d – element 3d fileEnjoy!
