Summary
Tatara mount double mosfet
Tag: Mosfet
-
Single Mosfet Case – No Fan 3D Print Model
Summary
I have modified this case since the wiring hole wasn’t big enough for my needs.
If you rotate the parts there’s no need for supports.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10 -
Mosfet Enlosure 3D Print Model
Summary
Got in a Tronxy X5S to X5SA upgrade kit from www.customize3d.biz and it came with a mosfet for the heated bed and while it came with a holder for it I wanted to something a little different. This is designed to bolt to the frame by 2 m4 bolts and T nut I allowed for the screw driver to pass through the side of the box to tight the mounting bolts. I will have a matching enclosure foe the control board once it has been test printed … I have not printed this item yet But I’m sure it will work. the lid should be able to be help on by 2 m3 bolts one from each side. -
MKS SBASE 1.3 BOX include Dual Mosfet, Four TL-Smoother, and FAN 120mm and Bracket to Alumunium Profile 3D Print Model
Summary
This is MKS Sbase case the dimension is 200x160x63 need a larger printer to do that.
Support for dual mosfet and four TL Smoother
Cooling by 120 mm Fan
add three hole on center to mount to alumunium profile vertically
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
No
Infill:
20 -
Dual mosfet mount for Melzi board 3D Print Model
Summary
Call me paranoid, after the connect melt on the Melzi board, I order 2 mosfet for both hotbed and extruder figured they both heat up, if hotbed connect can fail, so do extruder.
Grab rawlogic’s standoff and remix it to hold 2 module. -
Trigorilla MOSFET mount for 2020 extrusion 3D Print Model
Summary
I made this to mount a Trigorilla MOSFET on my reworked Folgertech i3. Should be suitable for any 2020 extrusion. -
Anet A2 Mainboard Cover MKS Mosfet 3D Print Model
Summary
This is a Mainboardcover for Stock Anet A2 Mainboard with mounts for MKS Mosfet.
Print Settings
Printer:
Anet A2 Rafts:
No Supports:
No Resolution:
0.2 Infill:
20%