Summary
Simple lightweight bracket for MKS TFT32 display
Tag: MKS
-
MKS Makerbase V1.3 Case – Remix 3D Print Model
Summary
Remix of https://www.thingiverse.com/thing:2008844
Not perfect – modified in Tinkercad but serves it’s purpose. -
MKS MINI PANEL REMIX 3D Print Model
Summary
Remix to make a plate cover for my d-bot corexy printer. -
MKS SBASE 1.3 BOX include Dual Mosfet, Four TL-Smoother, and FAN 120mm and Bracket to Alumunium Profile 3D Print Model
Summary
This is MKS Sbase case the dimension is 200x160x63 need a larger printer to do that.
Support for dual mosfet and four TL Smoother
Cooling by 120 mm Fan
add three hole on center to mount to alumunium profile vertically
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
No
Infill:
20 -
MKS GEN L V1.0 Prusa i3 MK2 / MK2s Case 3D Print Model
Summary
I edited using Fusion 360 and already printed for my self. I its work for you too.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk1 Rafts:
No Supports:
No Resolution:
0.2mm Infill:
15 -
MKS GEN-L Adapter board 3D Print Model
Summary
for 2020 aluminum
Print Settings
Printer:
Tevo Tarantula Rafts:
No Supports:
Doesn’t Matter Resolution:
0.2-0.25 Infill:
30% -
Tevo Tarantula MKS Gen-L Plate w/MOSFET 3D Print Model
Summary
I decided to switch to a MKS Gen-L so I could replace NEMA 17 drivers when/if needed, but I still wanted to use my original plates. While I was designing the new plate, I decided I’d add a side pod to mount a MOSFET out of the way (this MOSFET if you’re thinking of using this https://smile.amazon.com/gp/product/B01HEQVQAK/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1). I’m still very much a beginner with Fusion 360, so if you can do it more elegantly, please feel free to remix it (and drop me a line so I can see what you did and hopefully learn from it).
The MOSFET is taller than the MKS Gen board obviously, so you might need to use taller offsets than the stock ones from the Tarantula. The sketches in 360 should allow you to print the MOSFET cover separately from the MKS cover. I haven’t printed it yet or I’d tell you all for sure if that’s the case. -
Anet A2 Mainboard Cover MKS Mosfet 3D Print Model
Summary
This is a Mainboardcover for Stock Anet A2 Mainboard with mounts for MKS Mosfet.
Print Settings
Printer:
Anet A2 Rafts:
No Supports:
No Resolution:
0.2 Infill:
20%
