360° ViewSicilian cart wheel designed to be reproduced by any CNC or 3D printer.Extract the archive and resize it to your liking.Share, drop a comment (if you like / dislike) and enjoy it!The files in the .RAR are: Autodesk Maya 2013 and .STL– Italian / Italiano –Ruota carretto siciliano creata per essere riprodotta da qualsiasi CNC o stampante3D.Estrarre l’archivio e ridimensionate a vostro piacimento.Condividete e lasciate un commento!I file contenuti nel .RAR sono: Autodesk Maya 2013 e .STL
Tag: magnet
-
Mothers Day Fridge Magnet 3D Print Model
Summary
A good Mothers Day gift.
back plate requires 10mm x 2mm magnets. i bought some on Amazon. they work wellhttps://www.amazon.ca/gp/product/B01MTORMMP/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Print Settings
Printer:
dremel 3d40
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
15% -
Honey Bee Fridge Magnet 3D Print Model
Summary
A simple honey bee fridge magnet. The cut out in the back is to suit a 10mm x 1.5mm magnet. -
Bearbe Free 3D Model
a refrigerator magnet, an accessory for a table in the house or for a desktop, a model for decoration
-
15mm x 5mm magnet holder 3D Print Model
Summary
15mm x 5mm magnet holder.
The hole for the magnet is a little undersized so the printed part can be heated a little (eg hot water if using PLA) and press fit. Or use some glue or if your magnet has a hole in center – a screw. I went with heating and press fit and its been solid.
i didn’t use any support when printing, the inside roof of the hole where the magnet goes is a fair span (15mm of unsupported distance) and so that particular surface wasn’t perfect but it worked fine and its behind the magnet anyway – doing this saves breaking out support material.
Print Settings
Printer:
aldi cocoon
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
no -
WhiteBoard Set 3D Model
WhiteBoard SetFeaturesHighly detailed modelsQuads onlyno clean up neededall objects are logically named and easy to findall similar objects are grouped togetherrealistic designsReal world scale (cm)All file formats and archive files are tested individualyPreview the textures for the markers and the eraser in the provided imageslighting and background not includedmia material X is used on some objectsthis set includes the following only:*A whiteboard 90*60*1.5*An Eraser 10*5*2*2 small magnets*2 large magnets*1 thin marker*1 large marker
-
Permanent Magnet Motor/Generator Rotor 3D Print Model
Summary
This is a permanent magnet motor or generator rotor. It uses a double stack of the popular sized ceramic magnets (1-7/8″ X 7/8″ X 3/8″) like these :https://www.harborfreight.com/pack-of-2-ceramic-block-magnets-97504.html for each of the 6 positions. There is a choice or either a rotor for a 8mm shaft or a 1/2″ shaft. Use #6 to 32 x 1/2″ bolts to attach the ends. Dimensions: 3.5″ diameter X 1.885″ length. Also added .25″ bearing stand-offs on both ends.
.01″ added to spaces for magnets and bolt holes to compensate for shrinkage of material.
Disclaimer: Disclaimer: Experiment at your own risk. Catastrophic failure of parts spinning at high speed can cause damage to property, injury, or even death.
Print Settings
Printer Brand:
Printrbot Printer:
Play Rafts:
Doesn’t Matter Supports:
No Resolution:
.2mm Infill:
20 – 30% has worked fine for me. You should consider more for 5000+ rpm’s Notes:
.8mm top and bottom layers
.8mm walls
I print in pla. -
Xiaomi car dvr magnet mount 3D Print Model
Summary
For this thing you need:
2pcs magnet disks 20x10x3
1pcs only micro usb connectorhttps://ru.aliexpress.com/item/WSKEN-Micro-USB-Magnetic-Charging-Cable-TPE-Aluminum-1M-Cord-Magnet-Charge-Cables-For-Samsung-Xiaomi/32736867339.html?spm=a2g0s.9042311.0.0.qFAIDo
1pcs magnet cablehttps://ru.aliexpress.com/store/product/Wsken-Micro-USB-Samsung-Huawei-Xiaomi/3018058_32830913642.html?spm=a2g0v.12010612.0.0.9db71caqrGMyq
Some of thin teflon cable like 24-25AWG
Glue to mount magnets and connectors.
Print Settings
Printer:
Anycubic Kossel Rafts:
No Supports:
Yes Resolution:
0.1mm layer Infill:
100% Notes:
Use supports carefull because model have internal channel for wire.
Print 100% infill with 0.1mm layer (or less than 0.1) -
Magnet Holder 3D Print Model
Summary
Made for my sowing teacher.
Used to pick up pins.
Place a 5x1x1cm magnet in the block
Print 2 and glue together. -
Sicilian Cart 3D Model
360° ViewSicilian cart wheel designed to be reproduced by any CNC or 3D printer.Extract the archive and resize it to your liking.Share, drop a comment (if you like / dislike) and enjoy it!The files in the .RAR are: Autodesk Maya 2013 and .STL– Italian / Italiano –Ruota carretto siciliano creata per essere riprodotta da qualsiasi CNC o stampante3D.Estrarre l’archivio e ridimensionate a vostro piacimento.Condividete e lasciate un commento!I file contenuti nel .RAR sono: Autodesk Maya 2013 e .STL
-
EPIC FAIL FIAL fridge magnet 3D Print Model
Miserably failing magnet. Put it on your fridge, door, broken car, printer or your ex-boyfriend’s picture .. what NOT can you use it for?!
-
Led lapm with levitation 3D Print Model
Levitation lamp (using magnet and thin nylon) with 3-side photo frame.
You need 2x neodymium magnet ( 10mm )
nylon rope ( 0,4mm max 1mm)
25 – 30 cm led strip -
DRAWING 3D eddie (IRON MAIDEN) … 3D DRAWING ….. 3D Print Model
Today I bring you a 3d drawing of eddie, the mascot of the British heavy metal band IRON MAIDEN
put a magnet behind and hang it in the fridge with a very cool result to impress your guests ….
