Summary
I designed this drip tip to work with my M.Terk RDA on a Vaping American Made Rig Mod v3. It fits loosely without the oring, comfortably snug with an oring. The internal shape is tapered/conical to add a bit of restriction to the flow of air (strictly preference).
A single oring is used to help keep it tight/snug. What size works best may vary depending on print quality.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
No Supports:
No Resolution:
0.15 mm Infill:
20% Notes:
Insert Dimensions: 11mm DIA x 6mm
Mouthpiece Dimensions: 14mm DIA x 12mm
Oring Dimensions: 7/16″ DIA x 1/16″ thickness (~11mm DIA x ~1.7mm thickness)
Print orientation was upside-down (mouthpiece on build plate, insert to the sky). I printed with no supports, but do as you like/require.
Total print time: ~24 minutes
Nozzle/Extruder Temperature: 210°C
Bed Temperature: 55°C
Material: PLA (Any material would likely work. Print settings may need to be adjusted accordingly)
Post-Printing
Finishing
Flashing trimmed from the build plate layer. Light sanding with 220 grit sandpaper to make a smoother “friendly” edge on the mouthpiece opening.
Tag: M.Terk
-
M.Terk Drip Tip 3D Print Model