ADLER A110 Lever Action ShotgunModelled and unwrapped. Textured and rigged by Blackbladedesign.Relatively low poly, considering.This one took a while without any blueprints to go off, enjoy!
Tag: lever
-
Knight 600A Tube Tester Lever Cap 3D Print Model
Summary
This is a replacement lever cap for a Knight 600A tube tester. It probably will fit other Knight models.
Print Settings
Printer:
Monoprice Select Mini V2
Rafts:
Yes
Supports:
No
Infill:
20% -
Stratocaster Guitar 3D Model
electric guitar stratocaster strings lever bridge keyboard dots neck jack sound rock music pickup pick-up vintage roadworn noiseless open roads lespaul
-
Railway Arrow Low Poly 3D Model
Low poly railway arrow 3d modelAll objects and textures named correctlyTexture size 1024×1024 diffuse onlyGame readyMobile ready
-
Sliding Bevel Gauge 3D Model
3D illustration of a Grungy Sliding Bevel GaugeThe sliding bevel gauge is composed of three parts; the stock, the blade, and the locking device. The stock is typically made from metal or a hardwood such as rosewood, (in this case beach wood) The blade is often made from a hardened and tempered steel. Finally, the locking device secures the blade angle to the stock.Has you will note from the exploded image, I didn’t believe that is was necessary to thread the locking assembly because it is normally never seen, and this would have added extra polygons!Units: Centimeters Stock dimensions: X: 12.8cm, Y: 2.9cm, Z: 1.8cmUnit Scale: 0.010000Other Formats included: OBJ, 3DS-3D Studio, FBX-Autodesk FBX,Render: Cycles Samples: 200 Resolution: 2000 x 1000pxDenoising: OnColour Management: Filmic Look: Base Contrast, Rendered with Film settingCamera Focal Length: 50mm Sensor Size: 32mm DefaultMesh: Quads onlySubdivison Level 0: Polygons: 3,852 Vertices: 3,862Subdivison Level 1: Polygons: 15,412 Vertices: 15,432Subdivison Level 2: Polygons: 61,648 Vertices: 61,692Susurf Modifier: not applied.UVs: Non-overlappingTextures 4K & 2K pngBevel_Gauge_ColourBevel_Gauge_RoughnessBevel_Gauge_NormalBevel_Gauge_MetalnessWorld: Set to Set to Sky Texture, Strength: 2.000Node setup: simple workflowLights: are on layer 2
-
Stratocaster Guitar 3D Model
electric guitar stratocaster strings lever bridge keyboard dots neck jack sound rock music pickup pick-up vintage roadworn noiseless open roads lespaul
-
Stratocaster Guitar 3D Model
electric guitar stratocaster strings lever bridge keyboard dots neck jack sound rock music pickup pick-up vintage roadworn noiseless open roads lespaul
-
Stratocaster Guitar 3D Model
electric guitar stratocaster strings lever bridge keyboard dots neck jack sound rock music pickup pick-up vintage roadworn noiseless open roads lespaul
-
Stratocaster Guitar 3D Model
electric guitar stratocaster strings lever bridge keyboard dots neck jack sound rock music pickup pick-up vintage roadworn noiseless open roads
-
Stratocaster Guitar 3D Model
electric guitar stratocaster strings lever bridge keyboard dots neck jack sound rock music pickup pick-up vintage roadworn noiseless open roads
-
Stratocaster Guitar 3D Model
electric guitar stratocaster strings lever bridge keyboard dots neck jack sound rock music pickup pick-up vintage roadworn noiseless open roads
-
Stratocaster Guitar 3D Model
electric guitar stratocaster strings lever bridge keyboard dots neck jack sound rock music pickup pick-up vintage roadworn noiseless open roads
-
Rusty Crowbar 3D Model
Created with Blender 2.79DescriptionRusty metal CrowbarUnits: Centimeters Real world dimensions: X: 29cm, Y: 82cm, Z: 10.6cmUnit Scale: 0.010000Other Formats included: OBJ, 3DS-3D Studio, FBX-Autodesk FBX,Render: Cycles Samples: 200 Resolution:1500px x 900px 100%Denoising: OnColour Management: Film Look: Base Contrast, Rendered with Film settingCamera Focal Length: 50mm Sensor Size: 32mm DefaultMesh: Quads onlySubdivison Level 0: Polygons: 513 Vertices: 517Subdivison Level 1: Polygons: 2,054 Vertices: 2,057Subdivison Level 2: Polygons: 8,216 Vertices: 8,219Susurf Modifier: not applied.UVs: Non-overlappingTextures 4K & 2K pngCrowbar_Base ColourCrowbar_RoughnessCrowbar_NormalCrowbar_MetalnessWorld: Set to Set to Sky Texture, Strength: 2.000Lights: are on layer 2
-
C-Clamp 3D Model
vise instrument tools workbench vice apparatus mechanical threaded screw secure object work lever woodworking clamp bench engineer pipe metal heavy
-
Wing Corkscrew 3D Model
corkscrew cork screw bottle opener kitchen tool wine bottles basic puller stop drink dining serving tableware pull hand lever bottleopener can wing
-
A slot machine gamble machine 3D Model
Slot machine or gamble machine from casino . Hi-Poly 3D model .My own design , no trademarks or brands .Textures and materials included . Please use HDRi map (included) for metall reflections. You can control polygons by using meshsmooth function .
-
Forklifts 3D Model
It is lowpoly forklifts model for your games or animations etc. Clean mesh and topology.———————————————————————————created By Jakoos 3D Design
-
Industrial Power Switch 3D Model
Industrial Power Switch- Verticies 11,263- Polygons 11,384 (10,800 Quads, 584 Tris)An indutrial power switch great for any industrial environment setting. It is mostly quad and some tri geometry. All model textures are 4096 x 4096 resolution with non-overlapping UVs. Painted to look grungy and scratched. For a “New” look only use the Color_Map_Clean texture.- Created in Blender v2.79- Exported as :- 3ds- dae- fbx- obj- This model is two objects.- Box, wires, and shaft- Switch- Non-overlapping UV Layout.- Preview images where rendered in Cycles Render.- Material images rendered with subdivision level 2 whith the exeption of the one labeled “Subdivision Level 0”- Wireframe images rendered with no subdivision whith the exeption of the one labeled “Subdivision Level 2″Instructions:If you use sub-division, be sure to use “Subdivide UVs” setting, or textures may not match up.Texture Maps (All 4096×4096)- AO_Map.png- Color_Map.png- Color_Map_Clean.png- PowerSwithch_Normal.png- Roughness_Map.png- ScratchMask.png- Color_Map_Combined.png (Combines Color_Map, Color_Map_Clean, and ScratchMask in case you don’t want to deal with 3 textures)Environment Texture- ReflectEnvEquirectangular.png (2048×1024)
-
monoprice mini select Extruder Lever Arm 3D Print Model
Summary
Warning: The cover is as of yet untested. Tell me in the comments if it needs to be adjusted. This is a drop-in replacement for the monoprice mini select extruder arm and cover. After mine broke the day after my printer was delivered, I found Makerbot’s Replicator 2 extruder design to be the same except for the bearing size. I modified it in Onshape, and the bearing from the MP Select Mini fits snugly. If you had to replace parts other than the arm or cover of the extruder, Makerbot’s other parts should fit fine. I can’t find any dimensional differences between my part and the original, but your experience may vary. Tell me if it works in the comments! doesn’t seem to have any issues with it but if you do end up with problems, download the “fixed” version and try that. I also added a file with both the cap and the arm.
Print Settings
Printer:
monoprice mini select Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.2 Infill:
40-100%
Post-PrintingHow I Designed This
-
Stratocaster Guitar 3D Model
electric guitar stratocaster strings lever bridge keyboard dots neck jack sound rock music pickup pick-up vintage roadworn noiseless open roads
-
Jura Capresso Ultima 121 Charging Lever 3D Print Model
Summary
Made for a coworker. Tested and works.
Print on Side
Supports: Yes
Raft: No
0.1-0.2mm Height
3 walls, 100% Infill (Went overkill to give the part the best chance.
You will need a paperclip to glue and snip flush at the end that hooks to the retraciton spring. -
Couch Sofa Release Lever Slip-on Replacement Fix 3D Print Model
Summary
The release lever for my couch snapped-off, so I designed this fix for it. Since a “stub” of the original lever still remained, I designed this thing to slip on over the remaining stub. Printed in black PLA to match the couch, though I realize this makes it a bit hard to see in the photos.
The first photo shows the printed part attached to the couch. The second shows the “stub” that the printed part fits over. The third is a reference photo of a still-intact release lever. The fourth is just the part by itself.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.1 Infill:
20
How I Designed This
Fusion360. The .f3d file is included if you wish to tweak it based on the specifics of how your handle broke. -
Vintage Knife Switch 3D Model
Analog Knife switch power circuit electricity Vintage retro electrical contacts trigger connect commutator lever equipment lab steampunk dieselpunk
-
Vintage Knife Switch 3D Model
Analog Knife switch power circuit electricity Vintage retro electrical contacts trigger connect commutator lever equipment lab steampunk dieselpunk
-
Water Pump 3D Model
hand water pump well cast iron old farm rural garden antique historical victorian handle pipe village supply lever piston pbr textures
-
C-Clamp 3D Model
vise instrument tools workbench vice apparatus mechanical threaded screw secure object work lever woodworking clamp bench engineer pipe metal heavy pipe
-
C-Clamp 3D Model
vise instrument tools workbench vice apparatus mechanical threaded screw secure object work lever woodworking clamp bench engineer pipe metal heavy
-
Static Electrical Machine Oudin Resonator and Jacobs Ladder 3D Model
This is a collection of 21 Mad Scientist Objects. Each asset is a high end, photorealistic 3D model, that is created to help you add the realism to your project.Each model is suitable for any visual production – broadcast, high-res film close-ups, advertising, games, design visualization, forensic presentation, etc. Each model was originally created in 3Ds Max 2012, then fully textured and rendered using V-Ray. All geometry and visual aspects of the model are optimized to give you highest possible quality for up to 2k renders. There is no post-production used on any of the renders you see. This Collection contains:1. Static Electrical Influence Machine – Mad Scientist ID 1112103 – $792. Oudin Resonator – Mad Scientist ID 1104229 – $793. Jacobs Ladder – Mad Scientist ID 1102722 – $79* You save – $88Features: -This model is accurately sized to match the real object. -Objects are grouped and named according to their real purpose, allowing the model to be rigged and animated easily. -Clean and optimized topology is used for maximum polygon efficiency. -Each model is fully sub-dividable to allow Turbosmooth Iterations to increase mesh smoothness if needed. -All textures and materials are tailored and applied for high quality render results. -All objects have fully unwrapped UVs. -No extra plugins are needed for this model. -Lights and cameras are not included in the scenes. Specifications: -Each model is included in 4 file formats. -3ds Max V-Ray -3ds Max Mental ray -Cinema 4D R15 V-Ray -OBJ -Units in all formats: #centimeters -All Textures are PNG format with the following resolutions: – 4096 x 4096 px Additional Notes: This collection was created for 59 hours form our Leading 3D artists to ensure you get the best quality model and save precious production time. If you have any questions, you can contact us trough support. Just send a support ticket!
-
Winchester Rifle – Game Ready 3D Model
A game ready Winchester repeater rifle, rigged with animations. Made in Blender, rendered with Cycles and tested in Unity game engine.|Game Ready|- Asset has been dropped into and tested in Unity- Easy to re-apply texture in game engine- Animations are imported with file into game engine|Animations|Includes 2 animations.- Reload_gun- Fire_gun|Mesh Details|- made with polygonal quads only.- low poly and designed for games.|Material/Texture Details|- 2K texture. Can easily be reduced in quality to save space.- Colour and normal texture.- PBR material workflow in Blender only. Materials will have to be re-applied in non-native formats|Formats|- Files include BLEND, FBX, OBJ, DAE (Collada)- No plugins used
-
Hollow Metal Door Embossed Doors Collection model 3D Model
Collection of 3 Hollow Metal Embossed Doors (Each model also sold separately)-Each individual model is in a zip file with other exported formatsFormats Include: .max, .3ds, .obj, .fbx-Hollow Metal Door-025: Polygons: 12,719, Vertices: 14,644: Embossed Doors w. 6 Panels-Hollow Metal Door-026: Polygons: 11,100, Vertices: 13,027- Embossed Doors w. 2 Panels-Hollow Metal Door-027: Polygons: 11,792, Vertices: 14,605-Embossed Doors w. 4 Panels-Doors Include everything shown in renderings including door closer-Modeled to Scale and Dimensions: 3′-0′ x 7′-0′, Can easily be adjusted for different size.-Modeled in 3ds Max 2015 and rendered in Vray.-Door and Frame Colors can easily be changed-Door Edges on Embossed Panel have a vrayedges material to make the lines pop more-All objects grouped for easy scene movement-Model Placed at 0,0,0 axis-Doors can be opened, open group, and pivot point for rotation are the hinges. If pivot point gets reset it can be readjusted by going to:Hierarchy—Affect Pivot Point—Use move command to move pivot to center of Hinges-To rotate door and door closer: Open Group, Select Door and rotate to desired location, open door group and you will have to rotate ‘Door Closer-0XXA’ & Door Closer-0XXB’ to a position where they meet in the center, pivot is already set to their rotation location.Enjoy!
-
Military Control Panel 3D Model
High quality, fully textured model of military control panel. Perfect edge-loop modeling, UW-mapping and texture maps (diffuse, specular, bump/displacement).All textures – 4096 x 4096 px.Optimal polygons density.All textures and materials are included.Real-world scale.Unit: meters.Originally modelled in 3ds max 2012.Final images rendered with Vray 2.3.Hope you like it! Also check out my other models, just click on my user name to see complete gallery.
-
Henry Lever Action Rifle 3D model
HENRY LEVER ACTION RIFLE=========================- Modeled in Blender.- Preview image rendered using cycles.- All scene are included in .blend files.- Great for close up render.- All parts and materials are logically named.- Texture are packed in .blend files. A Separate download also available.OTHER FORMATS=================- 3ds MAX- COLLADA (.dae)- Autodesk FBX- OBJ* Texture needs to be reaplied for other formats
-
Henry Lever Action Rifle 3D Model
HENRY LEVER ACTION RIFLE
=========================
– Modeled in Blender.
– Preview image rendered using cycles.
– All scene are included in .blend files.
– Great for close up render.
– All parts and materials are logically named.
– Texture are packed in .blend files. A Separate download also available.
OTHER FORMATS
=================
– 3ds MAX
– COLLADA (.dae)
– Autodesk FBX
– OBJ
* Texture needs to be reaplied for other formats
