3DHunt.co

Tag: lee

  • Lee Enfield MK1 3D Model

    Lee Enfield MK1 3D Model

    Lee Enfield MK1

  • Game Death Bruce Lee 3D Model

    Game Death Bruce Lee 3D Model

    Chibi Anime 3D Character with control Rigg of Bruce Lee from old Movie of Game of Death

  • Lee Bench Plates 3D Print Model

    Lee Bench Plates 3D Print Model

    Summary
    These plates were designed for the Lee Bench Plate Reloading Press Mount LEE 90251. One model is blank except for the two rear locating holes. The second model has all the bolt holes for a majority of Lee reloading presses.
    I set infill density at 50% and wall, top and base thickness at 2.4mm with no problems
    Bench Plate Link: https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338315919&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F90251-LEE-BENCH-PLATE-KIT%2F221695798614%3Fepid%3D2255119378%26hash%3Ditem339e196d56%3Ag%3Avn8AAOSwB-1Yq26M%3Asc%3AUSPSPriorityMailPaddedFlatRateEnvelope!29588!US!-1
    Print Settings
    Infill:
    50%
    Notes:
    Set wall, top and base thickness at 2.4mm

  • Lee Hardness Tester Peg Board Holder 3D Print Model

    Lee Hardness Tester Peg Board Holder 3D Print Model

    Summary
    I customized https://www.thingiverse.com/thing:537516 to create a pegboard holder for the Lee Precision Hardness Tester.
    Also included is a lens cap for the microscope.
    The opening for the pressure die is sized for a Hornady Lock-N-Load die bushing, but it should work without the die bushing (though it will be loose).
    If anybody is interested in the OpenSCAD files I will post them here.
    Lee Precision Hardness Tester: https://amzn.to/2KWLRjT
    Hornady Lock-N-Load Bushings:https://amzn.to/2HBnVRS (10)https://amzn.to/2qAi7Qe (3)https://amzn.to/2GZ7AcC (2)
    Print Settings
    Printer:
    i3 “dolly” clone
    Rafts:
    Doesn’t Matter
    Supports:
    Doesn’t Matter
    Resolution:
    .2mm
    Infill:
    20%
    Notes:
    I usually print these successfully without supports, brim, or rafts.

  • 1969 Dodge Charger 3D Model

    1969 Dodge Charger 3D Model

    low-poly 3d model ready for Virtual Reality (VR), Augmented Reality (AR), games and other real-time apps.- car textures:PNG – 4K resolution- other available formats: obj, 3ds, fbx, max.- Polycount: 33 540 poly / 30 297 tris

  • Lee 1000 primer deflector 3D Print Model

    Lee 1000 primer deflector 3D Print Model

    Summary
    device clips between the two right hand columns on the lee 100 and deflect the odd rouge primer in to the correct place

  • Lee Enfield 3D Model

    Lee Enfield 3D Model

    The Lee Enfield rifle was used in both world wars and is an iconic weapon for the British army. This model can be used for internal and game engines. It has basic textures and normal maps but looks decent. The model has moving parts such as the bolt and the clip. It is not low poly but it can be easily decimated to make it low poly. Hope you enjoy.

  • Lee Pro 1000 Reloading Press Case Slider 3D Print Model

    Lee Pro 1000 Reloading Press Case Slider 3D Print Model

    Summary
    This is a case slider for a Lee Pro 1000 reloading press. I designed this to replace the one on my press that got damaged. The gap for the shell has been sized to match a 9 X 19 shell, but may need some adjustment. The hole where the guide rod fits still needs to be drilled out. I have included the123 D Design file to allow for tweeking

  • 3D Crescent Light By Lee Broom 3D Model

    3D Crescent Light By Lee Broom 3D Model

    Crescent Light By Lee BroomAn illuminated sphere sliced in half to reveal a crescent-shaped brushed brass fascia, Crescent Light seamlessly combines the solid and the opaque.3d max 2014fbxvray