Summary
Another K40 Laser Cutter exhaust adapter for 3″ hose. In this case designed to be minimal. A one piece version and a two piece version is available. If you are printing on a 3D Printer with a small build area the split version may be better. The yellow one in the picture was printed on an UP! Mini at 100% infill. I cutout a gasket to put behind it on my machine to help with the seal. Also provided is the Rhino 3DM files to make it a little easier if someone else wants to make improvements.
Tag: K40
-
Minimal K40 Exhaust Adapter 3D Print Model
-
K40 Air and Laser holder 3D Print Model
Summary
Simple clamp for the the K40 laser to hold a laser cross and air nozzle in adjustable brackets. On this model it is for an inflator needle with aquarium tubing for air delivery. The tube will slide into the slot in the
the holder. Use 3:1 adhesive heat shrink to attach the nozzle to the tubing before mounting in the holder. The laser holder is sized for an 8.8mm diameter laser dot or cross.
You will need (3) M3x 12-14mm screws and matching nuts to fit the brackets.
The mounting holes may need clean up work depending on the material used. The clamp is meant to slide up as far as possible when mounting.
Print Settings
Printer:
A8 custom Rafts:
No Supports:
No Resolution:
0.2-0.4 Infill:
65% -
K40 Laser Panel for using an LCD with a Cohesion 3D board 3D Print Model
Summary
This is version 1 of the panel, I will add the holes for mounting as soon as I get a chance. This was designed to use with the case linked below and has had everything moved to accommodate the stock opening on the K40 laser itself.
https://www.thingiverse.com/thing:87250