Summary
First I’ve found and printed this hook: https://www.thingiverse.com/thing:285782
The PLA version was able to withstand my puppy pulling on the leash for about 3 days, then the hooks started breaking off. I’ve made another one in PETG, that one successfully served its purpose for about 2 weeks. Then I realized that there’s a weak spot where the hooks connect to the plate. So I decided to design my own. Basically this is the same overall shape and size, but the hooks and the plate are thicker and I’ve filleted the joint between the hooks and the plate. Also this one has twice as many corgis 🙂
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
Doesn’t Matter
Supports:
No
Resolution:
0.2 mm
Infill:
30-50%
Notes:
For better strength print in PETG
Tag: (Improved)
-
Improved corgi 4x leash hook 3D Print Model
-
1/24 V2 (IMPROVED) Twin Motor mount/center skid/box ECX RGT FTX Barrage 3D Print Model
Summary
This is V2. I rotated the motors 90 degrees and moved them closer to center. I also raised them .050″. Now there is much better link clearance.
This is to mount two gear reduction motors in an ecx barrage or like rc crawler. Greatly slows it down for much more controlled crawling. Big improvement over stock. You have to either shorten the drive shafts or motor shafts slightly. Also you need to shave the links that mount under the motors. Uses factory hardware. No need to use screws to mount the motors. I used 300rpm motors. You can use the factory esc. Also you have to switch polarity on one of the motors. I’m thinking a higher rpm motor will be better for wheel speed. I’ll be experimenting with thathttps://www.amazon.com/Yosoo-Reduction-300RPM-Gearbox-Replacement/dp/B01C6MGK7G/ref=sr_1_7?ie=UTF8&qid=1517122153&sr=8-7&keywords=gear+reduction+motor -
S800 Sky Shadow improved servo horn 3D Print Model
Summary
Just a small little servo horn with around the same distances than the original that comes with the kit. The problem with the original one was that the horn has to be placed directly through the carbon rod in the control surface. My version should fix that and has a spare space for the carbon rod to go between the servo horn fixture.
At the moment untested, I will update if I have the time to build my S800 😉
Print Settings
Printer:
Tevo Tarantula Rafts:
Doesn’t Matter Supports:
No Resolution:
0.1 Infill:
100% Notes:
Just print it with 100% infill and with high resolution for better results
Post-Printing
I did draw it without tolerances, so you maybe have to widen the holes of the two plates.
And also drill the holes that you need for the linkage 😉 -
improved! control freak for xbox one 3D Print Model
Summary
version 2 of my control freaks
easier to print multiple sizes and stronger legs
Print Settings
Printer:
tevo tarantula Rafts:
No Supports:
Yes Resolution:
0.15-0.2 Infill:
25 Notes:
i suggest between 0.15mm-0.2 resolution any less and it will not come out well -
Geeetech improved Z adjust 3D Print Model
Summary
Geeetech prusa i3 axis wobble fix
by shawdreamer, published Sep 17, 2016
Added adjust screw stabilizer, reversed Z Nut to make better. Included Prt. to modifly as needed -
Scissors Clip (improved) 3D Print Model
Summary
Just another clip, an improved design
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
Doesn’t Matter Supports:
Yes Infill:
10% Notes:
Print at slower speed and 5mm brim will help to counter warping -
A6 Semi-circular Fan (Improved) 3D Print Model
Summary
This is an improvement to my previous Anet A6 Adjustable Fan. I have made this version for the Anet A6 in light of the results from testing by 3D Maker Noob. See his video at https://www.youtube.com/watch?v=vedP3jhMpy4&t=15s
I made the adjustable part smaller since several people complained that it was very hard to fit and adjust. This one is truly adjustable.
Print Settings
Printer:
Anet_A6 Rafts:
No Supports:
No Resolution:
.1 Layer height .4 nozzle Infill:
20%
