Summary
These bearing adapter can mount the IGUS RJM-01 (and maybe the RJMP-01) bearings on the ultrabase printbed. The design has been optimised to fix the bearing without squeezing it to much, so the bearing will not be deformed. the printbeds height remains the same as with the stock bearings. The design will be tested during the next days/weeks, hopefully there will not be the need to insert retaining rings to hold the bearing in place. Current design allows the use of a single bearing, maybe i will upgrade it to a double bearing version after the basic design is tested. For the current test, i used 0.15 layers of nx2 pla from extrudr, which actually sticks like hell on the ultrabase printbed (; (200°C, 60°C).
Tag: igus
-
Anycubic i3 Mega IGUS RJM-01 Bearing Adapter 3D Print Model
-
Linear rail carrier holder for BLV with igus TWE-04-12 3D Print Model
Summary
I had serious problems with the mgn12H rails from Aliexpress and bought some
350 mm T-linear rails from igus : (TS-04-12) and they are alright for the Z-Axis – didnt try X or Y !
Combined with their TWE-04-12 carrier it is only usable with a new 2020_left/right_holder from the BLV_mod -
Hypercube Evolution X Carriage for 10mm igus Bushings 3D Print Model
Summary
X-carriage for use with Igus JSM-1012-10 bushings and 10mm aluminum or carbon fiber rod.
