Summary
Replaced text with HyperCube logo.
Used on the fan for my Duet-Wifi, but should work with any 40mm fan.
Tag: HyperCube
-
HyperCube Cube 40mm fan grill 3D Print Model
-
E3D V6 Mount without Sensor (Hypercube Evolution) 3D Print Model
Summary
I have remixed the Extruder Mount for the E3D V6.
Now with 2 bigger holes for the Endstops and without Sensor.
Have fun with it 🙂 -
Hypercube Evolution 3D Print Model
Summary
This mount allows you to use the Flexion Extruder with your Hypercube Evolution. It includes a Bltouch sensor mount as well.
The extruder mounts through the stepper motor. To do this remove the top two screws on the stepper motor and replace with 45mm M3 screw going through the top two holes.
The 40mm fan mounts on the front. You will need two spacers. I had two spare from my old duplicator but you could print some from (https://www.thingiverse.com/thing:1656609). Between the 40mm fan and the spacer is the radial fan mount. I hot glued the radial fan in just to be safe but it really did not need it.
I printed the fan mount with supports and both with 50% infill. -
Hypercube Evolution Z-Nut Bracket v1.2 3D Print Model
Summary
Excellent Thing!
I had to remix mine to move the holes back about 3-4mm, works perfectly for my setup -
hypercube XY_Joiner remix (wider place for bearings) 3D Print Model
Summary
This is my modified version of the XY joiner in the hypercube 3d printer. The width of where you would usually put 2 flange bearings is slightly wider to accommodate toothed pulleys with an outer width of 8.6mm. see pictures for details.
Please note that the clamp peice needs to be from this page. the clamp from tech2c’s hypercube will not line up with the screws of this XY Joiner. -
Hypercube Evolution Addons 3D Print Model
Summary
This is a collection of things I created for my build of SCOTT_3Ds great Hypercube Evolution (https://www.thingiverse.com/thing:2254103).
3030_Lack_Foot.stl is a foot which fits 30×30 extrusions and allows mounting the printer. It’s intended to mount the printer on an IKEA Lack table. A 300×300 build platform size hypercube fits well on a Lack table.
CableGuideClip.stl is a CableGuide which fits onto Bosch Style 3030 extrusions. -
Hypercube Evolution X Carriage for 10mm igus Bushings 3D Print Model
Summary
X-carriage for use with Igus JSM-1012-10 bushings and 10mm aluminum or carbon fiber rod. -
HyperCube XY LM8UU Bearing Clamp With Skull 3D Print Model
Summary
Added a nice skull on the Hypercube XY bearing clamp
Print Settings
Printer:
Homemade Printer Resolution:
0.2 Infill:
100 -
Hypercube LED Hotend mount bolt-on 3D Print Model
Summary
Wanted a good way to attach the 5050 LED strip to underside of X carriage(without making a new one). Modified the bracket to bolt onto the bearing holder screws.
Print Settings
Printer:
Davinci 1.0 Rafts:
No Supports:
No Resolution:
0.2 Infill:
15 -
Direct drive extruder for Hypercube 3D Print Model
Summary
remixed to fit the hypercube mount, for the rest of the files use the original’s from the 3D 75 Geared Extruder
Print Settings
Printer:
Hypercube Rafts:
Doesn’t Matter Supports:
Yes -
Hypercube Evolution Additions/Mods 3D Print Model
Summary
Please try, but I have not actually tried this yet, I’ll try to modify if I get feedback. -
Graphite Bushing E3D Titan Carriage for HyperCube
Summary
I would like to use Graphite Bushing on my newly built HyperCube, so I make one.
This mounts the E3D Titan with a Stepper Motor. You will also need an end stop, 2x 81130 graphite bushing, some M3x15 screws and M3 nuts, and super-glue or something that can stick everything together. Since I make it in separated part to print them more easily.
This is still a WIP
Print Settings
Printer:
MakerOne Rafts:
No Supports:
No Resolution:
0.2mm Infill:
25%
How I Designed This
Using SketchUp