The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
Tag: Howitzer
-
2S3 Akatsiya 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
A-34 M1940 3D Model
3D model the T-34 is a Soviet medium tank that had a profound and lasting effect on the field of tank design. At its introduction, the T-34 possessed an unprecedented combination of firepower, mobility, protection and ruggedness. Its 76.2 mm (3 in) high-velocity tank gun provided a substantial increase in firepower over any of its contemporaries; its well-sloped armour was difficult to penetrate by most contemporary anti-tank weapons.
-
SHF-18 howitzer 3D Model
SHF-18 M777 Howitzer cannon 155mm artillery us army marines corps projectiles 155 mm towed military heavy American weapon usmc high mobility system
-
M109A6 Paladin self-propelled howitzer 3D Model
The M109 is an American 155 mm turreted self-propelled howitzer, first introduced in the early 1960s. It has been upgraded a number of times, most recently to the M109A7. The M109 family is the most common western indirect-fire support weapon of maneuver brigades of armored and mechanized infantry divisions.The M109 has a crew of six: the section chief, the driver, the gunner, the assistant gunner and two ammunition handlers. The gunner aims the cannon left or right (deflection), the assistant gunner aims the cannon up and down (quadrant). The M109A6 Paladin needs only a crew of four: the commander, driver, gunner and an ammunition loader.
-
T-155 Firtina 3D Model
The T-155 Firtina is a 155mm 52 caliber self-propelled howitzer manufactured in Turkey by a consortium of Turkish Defense Companies based on the South-Korean-made K9 Thunder 155mm self-propelled howitzer designed and manufactured by Samsung Techwin. The program of the Firtina was launched to meet the request of the Turkish army for a new self-propelled howitzer. In 2001, two prototypes was order and the production was launched in 2002. According to the licence agreement with Samsung Techwin, the first eight T-155s were built in South Korea, while the remaining batch of more than 300 units would be produced in Turkey. The total reported cost of purchase and technology transfer for the Turkish government was $1 billion. From 2001 to December 2009, more than 150 units have been delivered to the Turkish Army. A total of 350 T-155 Firtina howitzers are planned to be produced. In 2011 Azerbaijan ordered 36 Firtina with a delivery in 2014.
-
AS-90 Braveheart 3D Model
The AS-90, known officially as Gun Equipment 155 mm L131, is an armoured self-propelled artillery weapon used by the British Army.
-
M110A2 203mm Howitzer 3D Model
M110 Gun Howitzer 203mm M110A2 SPH 203 110 Arty Artillery US Army Military War Battle Game Sim RPG RTS Corp Iraq NATO Fire Support Barrage Self Propel
-
M52 Self Propelled Howitzer 3D Model
The 3d model based on a real
artillery system, created according to the original dimensions. All model files were “smoothed”. We can provide product files with original geometry by your request.
All main parts of the model are separated objects. Therefore, you can easy change all materials. We provide several formats for each model, most of them available by default.
* images rendered with using V-Ray plugin (we don’t include lighting and environment to a set). -
Russian Howitzer MSTA S 3D Model
The 2S19 “Msta-S” (Russian: Мста, after the Msta River) is a self-propelled 152.4 mm howitzer designed by Russia/Soviet Union, which entered service in 1989 as the successor to the SO-152. The vehicle is based on the T-80 tank hull, but is powered by the T-72’s diesel engine.The Msta is a modern howitzer designed for deployment either as an unarmored towed gun, or to be fitted in armored self-propelled artillery mountings. Current production of the towed model is designated Msta-B, while the self-propelled model is the Msta-S (also known by the GRAU index 2S19).Development of the 2S19 started in 1980 under the project name Ferma. The prototype was known as Ob’yekt 316. The 2S19’s standard equipment consists of a semi-automatic laying system 1P22, an automatic loader, an NBC protection system, passive night vision device for the driver, a wading kit, a dozer blade, a smoke generator and 81mm smoke launchers, 1V116 intercom system and a 16 kW generator AP-18D. In 2008 the Russian armed forces ordered an improved model with an automated fire control system.The 2A64 ordnance of the 2S19 can fire the following types of ammunition, among others: HE (24.7 km), HEAT-FS, HE-BB (28.9 km), HERA (36 km), smoke, chemical, tactical nuclear, illumination and cargo (ICM).[original research?] The laser-guided round “Krasnopol” (of the 9K25 system) can also be launched, as well as the shorter “Krasnopol-M” which fits into the automatic loader.Msta-S howitzers were used by Russian Army to deliver artillery strikes against Chechen separatists during the Second Chechen War.Msta-S howitzers have also been used in the War in Donbass by the Ukrainian Army as well as pro-Russian separatists who captured one machine during the conflict.
-
WDSz Regina 3D Model
WDSz Regina – division management machine WDSz.Regimental carriage staff for Regina. This is a key vehicle for effective fire performance. Coordinates data transfers and provides connectivity between lower and higher levels of command. It’s a link in the automated command system. It houses 3 operator consoles, essential terminals and radios, a GPS navigation system and power supply systems.
-
AMX-30 GCT-155 SpH 3D Model
The GCT 155mm AUF1 is based on the AMX-30 main battle tank (MBT) chassis and equipped with a 155mm 39-caliber gun with an auto-loading system, giving a rate of fire of 8 rounds per minute, and a sustained rate of fire of 6 rounds in 45s. The AUF1 has an effective range of 23,500 meters firing conventional rounds and 28,000 meters using Rocket Assisted Projectiles (RAPs).The first production AUF1s were delivered exclusively to the Saudi Arabian Army, while the French Army received their first deliveries in 1980, deploying the GTC 155mm AUF1 in regiments of 18 guns each. In addition, the Iraqi Army received a small number of GTC 155mm AUF1 variants in 1980, which they employed during the Iran–Iraq War. This model was done on MAX 2013, only the hull and small parts are built in poligonal mode, the rest are quads subdivisions. Only tracks and light are mapped ,unwrapped & textured. Enjoy it !!!
-
CAESAR self-propelled howitzer 3D Model
The CAESAR (CAmion Equipé d’un Système d’ARtillerie; French: Truck equipped with an artillery system) is a French self-propelled 155 mm/52-calibre gun-howitzer, installed on a 6X6 truck chassis. Examples built for the French Army use a Renault Sherpa 10 chassis, examples built for export utilize the 6×6 Unimog U2450L chassis. The CAESAR platform was developed by the former GIAT Industries (now known as Nexter) and is operated by the French, Indonesian, Saudi Arabian, and Thai militaries.
-
StuIG 33B – Self-propelled heavy Infantry Gun – G7 3D Model
Self-propelled heavy Infantry Gun StuIG 33B – 23.Panzer-Division – 1943Originally modelled in cinema4D 16. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.Features:- Inside scene: -model – 21 textures, 2 bumpmaps- All materials, bodypaint-textures and textures are included.- No cleaning up necessary, just drop your models into the scene and start rendering.- No special plugin needed to open scene.- Phong shading interpolation / Smoothing – 35°- NOTE – In lwo, 3ds, fbx and obj the Bumpmaps (Shirt_LL and Shirt_LR) must manually load in the Materialcanal.- c4d Version R16- Polygones – 806126 Vertices – 527743 – 242 Objects – 21 textures – 2 bumpmaps- obj File – lwo file – 3ds file – fbx file Version 2010The Sturminfanteriegeschütz 33B (StuIG 33B) was a German assult infantry gun of the WW2. The StuIG 33B was based upon a Panzer 3 chassis, with the turret removed and mounted with a 150 mm StuIG L/11 gun and an 7.92 mm MG34 machine-gun. The StuIG 33B was manned by a crew of five and powered by a Maybach HL120TRM engine providing a top speed of 20 kmh and a range of 110 km.
-
M109 Howitzer 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.
Model formats:
– *.max (3ds Max 2008 scanline)
– *.max (3ds Max 2008 vray)
– *.fbx (Multi Format)
– *.obj (Multi Format)
– *.3ds (Multi Format)
– *.mb (Maya 8.5)
– *.lwo (Lightwave 6)
– *.c4d (Cinema 4D 11)
* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)
If you need any other formats we are more than happy to make them for you.
The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.
We greatly appreciate you choosing our 3D models and hope they will be of use.
We look forward to continuously dealing with you.
Sincerely Yours,
Hum3D Team -
2S1 Gvozdika
2S1 Gvozdika (3D MAX 2014).V-Ray v.2.40.04 Render and Materials.Description:The ‘Gvozdika’ (also known by the GRAU index 2S1) is a Soviet self-propelled howitzer based on the chassis MT-LB APC, mounting the 122 mm 2A31 howitzer (elevation is from +70 deg to -3 deg with 360 traverse).Maximum firing range: 15.3 km (9.5 mi)The 2S1 is fully amphibious with very little preparation, and once afloat is propelled by its tracks.Max speed: Road 60 km/h (37 mph)Off-road 30 km/h (18 mph)Swim 4.5 km/h (2.8 mph)The 2S1 entered service with the Soviet Army in the early 1970s and was first seen in public at a Polish Army parade in 1974. Manufactured in Russian and Polish state factories.Current operators: Russia, Ukraine, Belarus, Azerbaijan, Bulgaria, Finland, Georgia, Kazakhstan, Serbia, Slovakia, Syria.
