Attached Housing 3 and 4 units buildingUseful for architects, architecture students, designers.Modeled in Sketchup 2016 rendered with vray 2.0
Tag: housing
-
Upper Housing for blower-compressor 3D Model
Upper Housing for blower/compressor ready for 3d print.
-
Apartment Building 3D Model
Renders as shown are in V-Ray only.Textures and materials are includedTextures included in the 3ds Max zip files.Lighting set up in 3ds Max using V-Ray.MAX/FBX/OBJ/MTL File Formats ReadyOriginal File Format Is 3Ds MaxFor more information about the model can be seen in the previews.I always try to create the best quality products. Serve the best for your work needs. Hope you like it. Please support me.Thanks for purchase!
-
Millennium Falcon RFID fob housing 3D Print Model
Summary
A housing for an RFID Fob, HID ProxiKey 3, I believe. -
High-tech house 3D Model
High-tech house consists of 446 polygons and 458 points, glass materials and diffusion are used.
-
DIY Flashlight Housing. Build List Noted 3D Print Model
Summary
This is a DIY flashlight housing that will hold the electronics and battery for you flashlight. It is scaled to mate directly to the fan connected to your LED heatsink and LED. Here is a video of my finished product:
Other things you’ll need
Buck Converter to step down battery to 12v for fan:https://www.amazon.com/Converter-1-25-36V-Step-down-Regulator-Voltage/dp/B074XRYC1M/ref=sr_1_2_sspa?ie=UTF8&qid=1521946510&sr=8-2-spons&keywords=buck+converter&psc=1&smid=A2TKGQERXRZT6A
Step up Module to converter voltage to 34V for LED:https://www.amazon.com/WINGONEER-LM2577-Converter-Adjustable-Regulator/dp/B01M16O7MG/ref=sr_1_13?s=electronics&ie=UTF8&qid=1521946604&sr=1-13&keywords=adjustable+step+up+module
Heatsink and fan combo:https://www.amazon.com/TX-Aluminium-Heatsink-Cooling-degree/dp/B01D1LD68C/ref=sr_1_3?s=hi&ie=UTF8&qid=1521946734&sr=1-3&keywords=led+heatsink
100W LED:https://www.amazon.com/LOHAS-White-Power-Energy-Saving/dp/B00CZ75TWA/ref=pd_bxgy_60_img_2?_encoding=UTF8&pd_rd_i=B00CZ75TWA&pd_rd_r=SW2RK68BF1ZFTTH5XKQ1&pd_rd_w=GexP5&pd_rd_wg=rcjc7&psc=1&refRID=SW2RK68BF1ZFTTH5XKQ1
Some sort of on/off switch. I used one from an old flashlight and handle I had.
Xt60 connector-https://www.amazon.com/10XT-60-Female-Bullet-Connectors-Battery/dp/B01HENCZ7G/ref=sr_1_1?s=hi&ie=UTF8&qid=1521946852&sr=1-1&keywords=xt60+connectors
4s RC battery – I had numerous laying around for my quadrotor-https://www.amazon.com/1300mAh-Battery-Airplane-Skylark-Nighthawk/dp/B013I9T0T6/ref=sr_1_1?s=toys-and-games&ie=UTF8&qid=1521946895&sr=1-1&keywords=4s+1300
Some way to charge the battery if you don’t have. This is the one I already had-https://www.amazon.com/Venom-RC-Battery-Balance-Charger/dp/B000QVK1B6/ref=sr_1_1?s=toys-and-games&ie=UTF8&qid=1521946940&sr=1-1&keywords=venom+rc+charger
Voltage display so you don’t overdrain your battery:https://www.amazon.com/bayite-Digital-Voltmeter-Display-Motorcycle/dp/B00YALUXH0/ref=sr_1_3?ie=UTF8&qid=1521947055&sr=8-3&keywords=voltage+display
Someone else’s DIY with similar setup video:
-
Villa 02 V2 3D Model
Modelled : 3ds Max 2013Rendered : 3ds Max 2013 – Vray 2.30Files : .max (2010, 2011, 2012, 2013).fbxand textures(c) 3D_SB 2015
-
Vacuum Impeller Housing 3D Print Model
Summary
Needed a small vacuum to clean up my work area after all the messes that accrue. Rather than spend $30 on a small shop vac, I figured it could be an interesting opportunity to see how sturdy of a print I could make while testing out how accurate I could print threads generated in Fusion 360. I went to a local goodwill and bought a corded dust buster for $3, a seal-able ammo can from harbor freight, and a couple other components. In all it cost around $10. I used extra filament which is why the assembly is three colors. overall it works a hell of a lot better than the original used vacuum, but I would’ve maybe chosen a more powerful impeller motor if I were starting over. -
Animated process of house building 3D Model
Animated process of house building over white surface. My own design.Easy to use if you want to show how build a house in 12 seconds . Very good for real estate advertising video, just put your logo .Was used procedure materials for textures. If you want to use correctly animation, please use max file.
-
IEC C20 connector housing 3D Print Model
Summary
This is the housing of an IEC C20 male connector.
Needed a new one cause I managed to break one. -
Fan Housing with sensor mount 3D Print Model
Summary
This is the 40mm cooling fan mount made by petitt57 modified with a mount for a 18mm abl sensor.
Visit the original here: https://www.thingiverse.com/thing:2271289 -
Housing for KKmoon DC 12V 24V 4-20 mA Signal Generator 3D Print Model
Summary
This is my first design. Its just a housing for the KKmoon DC 12V 24V 4-20 mA Signal generator.
I didnt print it yet since im waiting for my printer to arrive. I might have to tweak it a little.
Maybe someone owns that thing too and wants to use a housing aswell -
Tensor Field Generator Housing Star Wars 3D Model
Star wars sci-fi fighter C-9979 landing craft tensor field generator housing destroyer droid ship battle transport
-
VideoCard emulation 3D Model
The prototype model of the video card case. In this project we used materials “V-Ray RT 3.20.03” (3D Max 2014) and 2 textures (284×274)If you need to bring the model to print on a 3D printer – you can contact me again. I will create all the necessary holes and fastenings for your needsFormats: OBJ, 3DS, MAX(translated using google translator)
-
XHB Connector 3D Model
XHB Connector=================================- Modeled in Blender.- Preview image rendered using cycles.- All scene are included in .blend files.- Great for close up render.- All parts and materials are logically named.OTHER FORMATS=================- 3ds MAX- COLLADA (.dae)- Autodesk FBX- OBJ
-
Geeetech GT2560 housing for I3 Alu 3D Print Model
Summary
Adapt for my I3 Alu
I use sanguinololu hole to fix it -
Mega Housing 3D Print Model
Summary
I got the idea for this after the significant other decided there was a good chance that a sideways glance from her would destroy my printer. I originally was going to just print something that had already been uploaded but I couldn’t find something that would really work so I used the lid off of the geeetech 2560 GT housing and designed my own frame. I have included 2 different versions though one I would suggest you print only if you are courageous. I have included links to the amazon fan controller and fan I opted to use. I also included the SolidWorks files for those who like to tinker.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
Doesn’t Matter Supports:
No Resolution:
.2 Infill:
25% Notes:
YOU MUST USE RAFTS ON THE ONE WITH THE OVERHANG OR HAVE A HELL OF A MESS TO CLEAN UP.
Post-Printing
IT GOES WITHOUT SAYING
If you want to print the file with the stadium style top you are definetly going to have to tinker with the supports and the infill should be at lest 50 as the walls are rather thin.Custom Section
Items used
Temperature sensor and fan controller
https://www.amazon.com/gp/product/B016OA7KNE/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Fan 4 wire 80mmhttps://www.amazon.com/gp/product/B00H3SWJ24/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1 -
Housing Lowpoly 3D Model
***HOUSING LOWPOLY**Anviable file- 3D max 2009- FBXFEATURE- 3 house type with 2 colours- 3 shop building with 3 colours- seater-street lam- recycle bin- 2 tree model-2 paving block type- 2 Aspalt way type- and other decorationAll model low poly,texture using painting PSD 1000x1000for any question please contact methanks for viewing
-
Anycubic Kossel Delta Plus fan housing 3D Model
fan housing fits my mainboard mod and uses a standard 40mm 12v fan which will plug into spare socket on main board
-
WaveShare 5inch Display Housing and Display Mount 3D Print Model
Summary
NOTE: Before printing please check, if it looks sane for you! Some of the models around thingiverse seem to have been designed for a different version of the display. My display and my Raspberry did not fit into those housings, so I designed this one.
This model contains a housing that fits a WaveShare 5inch Display (Version 2) including a Raspberry PI 3.
The project contains two versions of the model:
normal box without a mount
housing with a “wall mount” with a movable arm
I use the second version to mount a Raspberry PI running Pronterface mounted to my printer-housing.
The movable arm allows routing cables inside the arm. It is basically possible to also route the power-supply inside the arm, but I still need to solder micro-usb connector that is small enough to fit into the housing.
To close the housing, I used the spacers included in the WaveShare package including addidional M3 screws for the front-plate. The arm is fixed with M3.5 metal screws. Those can be easily removed to allow access to the USB and ethernet-ports of the Raspberry PI.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
Yes Resolution:
0.2mm Notes:
The archive contains a model with and without a mount. The model without the mount only consists of the bottom and top part. The top part is also used for the model including the mount. Please ensure that you look at the files before printing and be sure that you rotate them properly.
For only the display case print
WaveShare_5inch_Bottom.stl
WaveShare_5inch_Top.stl
For the box including the mount, print
WaveShare_5inch_Top.stl
WaveShare_Mount_5inch_Bottom.stl
WaveShare_Mount_5inch_Mount_Top.stl
WaveShare_Mount_5inch_Mount_Plate.stl
I used slic3r for slicing. During the print I used white ABS. To ensure that the round parts came out nicely, I had to manually tune the support material settings.
The wall mount prints best, if printed on the side to ensure that the round parts are completely circular.
Note: The movable arm could use a drop of oil (yes oil, not WD40). Not much, so it does not drip out but enough to make it move smoothly. -
3D apartment complex 3D Model
this apartment complex does not come with textures because many textures fit well with it. try out any textures and watch it fit well with it.
-
Science center building 3D Model
Science center building situates on the picturesque hilly terrain. The basic idea is that the casings around the perimeter are accommodated various science departments and they all connected in the central synthetic housing.However you can use the building as an exhibition center, office and other public building or even as a dwelling.It is made of reinforced concrete with steel imposts and triple glazed windows.One or more textures on this 3D model have been created with photographs from Textures_com. These photographs may not be redistributed by default; please visit textures_com for more information.
-
house 3D Model
Features:- High quality model- All materials and textures can be easily modified.- Materials are logically named (V-Ray materials)- All textures and materials are included and mapped in every format.- Model is fully textured with all materials applied.- No special plugin needed to open scene.*********************************-Textures-IES lights-V-Ray Proxy-Post production sample3.- Textured and shaded for V-Ray (2.0). Ready to render.4.- Real-World scale (m)5.- 4 scenes of the original output6.- Render settings are configured to achieve high-quality images.
-
3D Science center building model 3D Model
Science center building situates on the picturesque hilly terrain. The basic idea is that the casings around the perimeter are accommodated various science departments and they all connected in the central synthetic housing.However you can use the building as an exhibition center, office and other public building or even as a dwelling.It is made of reinforced concrete with steel imposts and triple glazed windows.One or more textures on this 3D model have been created with photographs from Textures_com. These photographs may not be redistributed by default; please visit textures_com for more information.
-
Science center building 3D Model
Science center building situates on the picturesque hilly terrain. The basic idea is that the casings around the perimeter are accommodated various science departments and they all connected in the central synthetic housing.
However you can use the building as an exhibition center, office and other public building or even as a dwelling.
It is made of reinforced concrete with steel imposts and triple glazed windows.
One or more textures on this 3D model have been created with photographs from Textures.com. These photographs may not be redistributed by default; please visit www.textures.com for more information. -
3D Fantasy Castle 3D Model
Modeled with Autodesk Maya 2016 using polygons.With materials and textures.Mental Rays Mia Material X is used for all objects in the scene. The file called ‘ render ‘ is to render like the first imatge with Maya Mental ray. For best results add a render occlusion on it.Formats mb, fbx, obj and 3dmax.Thanks very much.
