Summary
ITEM-THING W/ HOLES
Print Settings
Printer:
MP SELECT MINI
Rafts:
Doesn’t Matter
Supports:
Yes
Resolution:
0.001
Infill:
NO
How I Designed This
IDK PLUS AUTOCAD
Summary
Easy Printable Bonsai Pot Series
Pot 2 – Rectangular Modern Bonsai Pot
A simple, circular bonsai pot with drainage hole.
Why?
These pots are designed to be easily printed without supports.
There are a lot of bonsai pot designs that have no way of orienting them for printing without supports.
By splitting the pot into two pieces, feet and body, you can easily print both without support and have a great looking pot at the end of it.
Feet
Print the foot model 2 times as downloaded, and 2 times mirrored (this should be easily accomplished in your slicing software)
Print Settings
Printer Brand:
Tinkerine
Printer:
Ditto Pro
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
10%
Notes:
Print 4 copies of the feet, 2 of them mirrored, and glue to the base. They are designed to be glued right up to the edges.
Scale up or down as needed.
How I Designed This
Fusion 360
Summary
I needed a front brace for my A8. All the models that I found here didn’t fit. For some reason the holes for the bolts were too high for my machine. So I made a design with the center of the bolt holes lowered to at about 14mm above the bottom.
How I Designed This
Designed in TinkerCAD.
Summary
I added a couple holes in each end. I was going to put some barrel jacks in them. Go ahead and put whatever you want into those holes.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Infill:
100 Notes:
ABS @ 230
bed at 80
100% infill
print speed 60
How I Designed This
Summary
This is a 4s10p, 18650 battery holder for a 12 volts system (with a low voltage cutout and a DC-DC buck). Nominal voltage of 14.4 with a high of 16.8 volts. It holds 40, 18mm cells snugly.
I added a 1/4 inch bolt hole to bind everything together, mount to a case.
One of each file should be printed to get the tabbing and alignment correct. They’re labeled top and bottom, but they could be used the other way–top as bottom and bottom as top (or left side right side, etc).
Each staggered row should be tabbed down the middle with cells alternating anode – cathode – anode – cathode (in series) and bridged over the tabbing slots to the next row with the cells aligned the same as the previous (in parallel). If you don’t understand how this works, study up.
Built for my portable solar kit.
Summary
Scaled to fit 3 inch wheels and added mounting holes.
Summary
Scaled to fit 3 inch wheels, and added mounting holes.
Summary
I took Fireflynj wheel chocks and added mounting holes.
Summary
This is an edit of a Gravity claw made to work with M5 bolts (same as a quadcopter motor)
High quality model. Ideal for close up.The model is highly accurate and based on the manufacturers original dimensions and technical data.Excellent for interior renderings.poly count based on 3d max file onlymental ray Autodesk materials used so its textured but with Autodesk only you can convert it to vray or corona by convert scene tool .
-The 3dsmax scene file contains the base mesh with OpenSubDiv modifier applied.-The OBJ contains the base mesh only. No subdivisions applied.-The STL file is the subdivided hi-res geometry only.- 3D Print ready- Motion Graphics ready