The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
Tag: GoPro
-
GoPro Hero 5 – Element 3D 3D Model
This high quality 3d model for 3ds Max, Cinema 4D and Element 3D – GoPro Hero 5Item included file scene with all light setups and materials. Just click the render button and you’ll get image like preview images .Features:- 3d model is completely ready for detailed and beautiful rendering and animation.- High-poly and low poly- element 3d v2.2- The model have clean topology- All objects are separated and named- Suitable for close-up rendering- You can easily change or aply new materials, color and other.All parts of this model have been modelled separately to achieve as much realism as possible.It can be used as a production model without any requirement of additional modeling and texturing.Please font’t forget to rate this item if you liked him.Sincerely Yours,Cactus 3D Team
-
Armattan Rooster/Chameleon Ti GoPro Session Mount 25° 3D Print Model
Summary
25° Session Mount. I haven’t tested it yet it but it should work -
Rad-X (Kwad Box) gopro mount 3D Print Model
Summary
a gopro mount i made for the Kwad Box Exclusive Rad-X frame.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
100
Notes:
Printed with SainSmart Tpu
Bed – 70C
Hotend – 215C
30mm/sec -
GOPRO tripods adapter 3D Model
this model application for gopro tripod adapter.3d model design with catia and made with zbot 3d printer
-
Gopro helmet mounts 3D Model
this model application for Gopro camera install on you’re helmet with sticker.print with Zbot 3D printer
-
Thrust UAV ALPHA – Spaz Pod (Gopro) 3D Print Model
Summary
35 Degree Gopro mount Pod for the Thrust UAV Alpha. Designed around a Foxeer micro cam and AXII antenna.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
50%
Notes:
TPU -
Support Gopro 3030 3D Print Model
Summary
Bonjour,
Le même que l’original mais mesurant 32 mm de haut contre 37 à l’origine.
cordialement -
GoPro Session 5 protector cap 3D Print Model
Summary
Gopro Session Cap to hold your camera in place. Print in TPU. This was designed for the seesion and has a front and back lip that locks the camera in place. Does not show in superview. I have never had an eject with this cap. -
Essential GoPro Session to Tripod Adapter 3D Print Model
Summary
An extra simple adapter for GoPro Session that uses the original mounts and adapt it to a standard tripod with the help of an M6 nut (1/4” 20).
The nut fits just right and holds itself in place.
Printed in PLA with 60% infill with a Micromake delta its sturdy enough for the purpose
Enjoy!
Print Settings
Printer:
Micromake Delta D1 Pulley Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.2 Infill:
60 -
GoPro Tripod Adapter with 6mm thread 3D Print Model
Summary
Remix from https://www.thingiverse.com/thing:1238967
now comes with 6mm thread. -
GoPro NVG Mount (Emerson Bracket) 3D Print Model
Summary
This is a Go-pro mount based on an Emerson NVG bracket (link below) to make a low cost, durable mount similar in style and positioning to the Brainexploder NVG mount (a touch overpriced on Shapeways).
Print the parts, assemble body + left/right plates with M3 screws and nuts. Mount this assembly to the bracket with M4 screws and nuts.
https://www.aliexpress.com/item/Tactical-Airsoft-Paintball-Fast-Helmet-Mount-NVG-Mount-Adapter-High-Quality-Outdoor-Hunting-Combat-Helmet-Accessory/32666867986.html?spm=2114.search0104.3.65.2mO1DF&ws_ab_test=searchweb0_0,searchweb201602_3_10152_10151_10065_10344_10130_10068_10547_10342_10343_10340_10548_10341_10084_10083_10139_10615_10307_10059_10314_10534_100031_10604_10103_10142,searchweb201603_40,ppcSwitch_5&algo_expid=45654ac3-db07-45a0-b95b-809b6d007090-9&algo_pvid=45654ac3-db07-45a0-b95b-809b6d007090&priceBeautifyAB=0 -
Swissknife : GoPro session mount 35degrees 3D Print Model
Summary
Gopro Mount for swissknife frame.
The bottom part can be attached with 2 zip ties to the top plate. -
GoPro Session mount for Martian 2 frame 3D Print Model
Summary
30 degree GoPro Mount for martian 2
Martian 2 frames aren’t consistent, this is for the following mounting dimensions
Mounting points are ~45mm x ~32mm
more angles incoming
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 V2 Rafts:
Doesn’t Matter Supports:
No Resolution:
.02 Infill:
20% Notes:
Print flat on screw mounts -
Hobby Lobby Hunter GoPro mount 3D Print Model
Summary
GoPro mount that bolts to the roll cage of a Hobby Lobby Hunter.
Required hardware:
2x M3 x 10mm bolt
2x M3 nylock nut -
Plate Adapter for Gopro Session for Zhiyun Gimbal 3D Print Model
Summary
Center Mount Plate Adapter for Gopro Session for Zhiyun Gimbal
Print Settings
Printer:
CR10 Rafts:
No Supports:
No Resolution:
.2 Infill:
20 Notes:
you have to have a 12mm steel dowel mounted with a 6mm screw to make this balance -
gopro session strong protective case + glass 3D Print Model
Summary
strong full-body go pro session case, one is open on the back, the other can fit a plastic cap
i attached a dxf with the path for cutting the protective “lens” in 2-3mm of PMMA or PC
also i’ve uploaded a clip to hold the protective lens on standard hollow gopro frames
other photo soon, work in progress -
GoPro Session Strap Plate 3D Print Model
Summary
This is a little GoPro Session mounting plate I threw together for a friend.
He has the Session 5 but it might work for other Sessions.
It is designed to have a battery strap pass through the slots and secure it to the frame of a quadcopter (drone). -
Martian II 6″ GoPro Mount 3D Print Model
Summary
Martian II 6″ GoPro Session camera mount.
Print Settings
Printer Brand:
LulzBot Printer:
TAZ 5 Supports:
Yes Resolution:
.2 Infill:
100% -
Customizable GoPro Knuckle Grip 3D Print Model
Customizable GoPro Knuckle Grip
Customize: -
GoPro Mount for Longboard 3D Print Model
Summary
Original design was by SteveMachine. I just made his a bit slimmer and filleted some edges to make it look less bocky. -
GoPro HERO4 Session 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
GoPro Hero4 Lens Holder 3D Print Model
Summary
This is a lens holder for GoPro Hero4. Its useful if you use custom lenses with your GoPro. I helps keeping the lens in focus so you wont turn it accidentally. You will need one 3mm nut and bolt.
Also, you may want to help the nut with a soldering iron an to sand a little bit the flaps of the holder in order to make it fit perfectly.
Dont turn too hard as you risk to tilt your lens.
Check some more of my work at:
http://www.alterlab.iohttp://www.sbromberg.co -
Antech Light to GoPro Bracket 3D Print Model
Summary
This is a bracket to adapt an Antech light (http://a.co/jfEcPOR) to a standard GoPro mount.
Print Settings
Printer Brand:
Tinkerine Printer:
Ditto Pro Rafts:
Yes Supports:
Yes Resolution:
0.2mm Infill:
80% Notes:
The default mount that came with the light did not seem strong enough to resist a mountain bike ride, which is what I need it for.
I included a cutout for the cable to exit towards the front, but there is actually enough space for it to go directly to the back between the “legs”, as shown on the pictures.
Post-Printing
After printing, I had to trim a bit the bottom face for the stop to fit in the grove between the cooling fins. Also, the fit was extremely tight; the GoPro mount was really bent at first. After a few days under stress, it looks like the bracket extended a bit and now the fit is perfect.
The model I uploaded has a slightly larger inner diameter and slightly thinner stop, so that should provide an easier fit (although not tested). -
GoPro – Helmet Extensor 3D Print Model
Summary
GoPro – Helmet Extensor
Nozzle size – 0.3 mm
Layer height – 0.1 mm
Shell thickness – 0.6 mm
Fill Density – 60%
Bottom/Top thickness – 0.2 mm
Nozzle temp – 240°C (Material: ABS)
Bed temp – 83°C
Speed.
Travel – 150 mm/s
Bottom layer – 40 mm/s
Infill – 65 mm/s
Top/bottom – 40 mm/s
Outer shell – 40 mm/s
Inner shell – 55 mm/s
Support type – Everywhere
Estimated Time – 6 hs
Print Settings
Printer Brand:
Prusa Printer:
Prusa Steel Rafts:
No Supports:
Yes Resolution:
0.1 Infill:
60 -
DJI Spark Drone 3D Model
This 3d model DJI Spark DroneOriginally created with 3ds Max 2012Features:-High quality polygonal model, correctly scaled for an accurate representation of the original object.-Models resolutions are optimized for polygon efficiency.-All colors can be easily modified.-Model is fully textured with all materials applied.-All textures and materials are included and mapped in every format.-3ds Max models are grouped for easy selection, and objects are logically named for ease of scene management.-Model is real world scale 143 mm.File Formats:- 3ds Max 2012 V-Ray 2.3 and standard materials scenes- Cinema 4D R14- Maya 2011Textures Formats:- (11 .png) 4096 x 4096- (3 .png) 2048 x 2048- (3) PSD filePolys and vertsP-252,280V-255,404
-
E3D – DJI Spark Mini Drone 2017 3D model 3D Model
This pack:Element 3D V2.2 ( All colors )models preset easy to use- 1 file OBJ High poly- 1 file OBJ standard- 1 file C4D R12 standard render- 1 file 3ds max 2012 standard material- E3D file full materials set up like previewsHow to use it?1. Open After Effects CC 2014 ( or higher) and create new composition ( You need Element3D V2.2 to use )2. Create new Solid layer and add Element effect. ( Effect/Video Copilot/ Element )3. Click Scene Setup4. Click on IMPORT inside Element3D scene setup5. Choose my .e3d preset for the model and press Open.If you dont see the model do not forget to right click on the model name and press Replace model then select the .obj model file in the respective models folder.
-
Gopro Lens Ring 3D Print Model
Summary
I made this because the plastic ring around my gopro lens broke in half. So my options were to spend $15 on amazon or go through the process of sending it in and getting a new gopro. This might require a little bit of sanding to get it to fit just right. I would say print at 100% infill just so its more durable. -
E3D – DJI Phantom 4 PRO 3D model 3D Model
This pack:Element 3D V2.2 ( All colors )models preset easy to use- 1 file OBJ High poly- 1 file OBJ standard- 1 file C4D R12 standard render- 1 file 3ds max 2012 standard material- E3D file full materials set up like previewsHow to use it?1. Open After Effects CC 2014 ( or higher) and create new composition ( You need Element3D V2.2 to use )2. Create new Solid layer and add Element effect. ( Effect/Video Copilot/ Element )3. Click Scene Setup4. Click on IMPORT inside Element3D scene setup5. Choose my .e3d preset for the model and press Open.If you dont see the model do not forget to right click on the model name and press Replace model then select the .obj model file in the respective models folder.
-
Ricoh Theta – GoPro adapter 3D Print Model
Summary
This is an adapter for using Ricoh Theta camera with GoPro accesories.
It will need two M3x10mm screws. You can access all ports from below.
Please note that the camera is expected to be in a vertical position as it is not tightened with any mechanism. -
E3D – GoPro Hero 5 Black 3D Model
This pack:Element 3D V2.2 ( All colors )models preset easy to use- 1 file OBJ High poly- 1 file OBJ standard- 1 file C4D R12 standard render- 1 file 3ds max 2012 standard material- E3D file full materials set up like previewsHow to use it?1. Open After Effects CC 2014 ( or higher) and create new composition ( You need Element3D V2.2 to use )2. Create new Solid layer and add Element effect. ( Effect/Video Copilot/ Element )3. Click Scene Setup4. Click on IMPORT inside Element3D scene setup5. Choose my .e3d preset for the model and press Open.If you dont see the model do not forget to right click on the model name and press Replace model then select the .obj model file in the respective models folder.
-
Eachine Wizard 220 gopro mount 25deg 3D Print Model
Summary
simple quick design for a gopro mount for the eachine wizard x220.
I based the bolt spacing on Brandoncook’s design, its a very similar design, but made from scratch.
not printed or tested yet,
suggest ABS or TPU/TPE, at least 50% infill, better 100% for strength!)
Supports probably needed for the strap hole. -
GoPro foldable tripod
I was looking for a simple lightweight GoPro tripod – so I came up with universal head that can use legs with different angles.
For now, there is 40 deg. version perfect for Session, and 60 deg. for classic GoPro to ensure better stability. -
Gopro Cap mount
This Gopro cap mount, can be used with caps, there has velcro in the front. Adds more stability to the camera.
