Proton Gun (Neutrona Wand) from Ghostbusters
Tag: Ghostbusters
-
Slimer Ghostbusters 3D Model
Model: Slimer GhostbustersMedia Type: 3D ModelGeometry: Quads/TrisPolygon Count: 16120Vertice Count: 7533Textures: YesMaterials: YesRigged: YesAnimated: NoUV Mapped: YesUnwrapped UV’s: Yes Unknown****************************************************************************Textures formats: TGA***************************************************************************Features:- Based off of Ghostbuster’s beloved ghost Slimer- Includes Basic Rigging meaning no Mouth Rig***********************************************************************File formats:- FBX (Multi Format)Every model has been checked with the required software.*********************************************************************If you would like to request a model or If the price is to high offer me a price for this or any other model just contact me. Also If you would like me to work on a project for you I’d be happy to work something out. !!!MAKE SURE TO RATE THIS MODEL AND SHARE IT PLEASE !!!!Thank you and I hope you enjoyed this product 🙂
-
Ghostbusters Slimer high polygon 3D Model
Ghostbusters Slimer, high polygon 3D model (digital sculpture).You can use this model for creations of Digital Sculptures for 3d printing or how base for making low poly model. The model has two poses.Rendered in KeyShot 5.ZTL Subtools list:Slimer _bodySlimer _nailsSlimer _jaw_ bottomSlimer _tongSlimer _jaw_topSlimer _teethSlimer _eyesAvailable formats:1. Slimer_T-pose_decimate_OBJ.rar – optimized high poly mesh, default pose, ~4000000 polygons;2. Slimer_T-pose_OBJ.rar – high poly mesh, default pose,~10000000 polygons;3. Slimer_pose_decimate_OBJ.rar – optimized high poly mesh in a pose,~4000000 polygons;4. Slimer_pose_OBJ.rar – high poly mesh in a pose, ~10000000 polygons;5. Slimer_ZTL.rar – Zbrush tool file, includes seven subtools, subd levels and layers with pose~10000000 polygons.
-
Ghost trap 3D Model
Ghost trap is a sealed container that allowed the Ghostbusters to transport the spirits to the Containment Unit, where they would be released into the grid. It is unclear what happens to the trap once placed inside the grid, though some have theorized that when a captured ghost is put into the Containment Unit, the entity is pumped out of the trap cartridge so it can be used again.Once a trap has captured a ghost and has closed, it cannot be re-opened without releasing the ghost contained within. For this reason, the Ghostbusters must each carry several traps. They must dispose of a trap once it is used.Model dimensions:- length – 1230 mm- width – 910,8 mm- height – 225 mmTrap dimensions:- length – 461 mm- width – 182,5 mm- height – 225 mmPedal dimensions:- length – 269,8 mm- width – 203,5 mm- height – 180 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:http://ghostbusters.wikia.com/wiki/Traphttps://www.youtube.com/watch?v=z6KmX_poEV8https://www.youtube.com/watch?v=dM4ZP0ydzKwhttp://www.slashfilm.com/make-your-own-ghostbusters-ghost-trap/http://www.instructables.com/id/Ghostbusters-Ghost-Trap-Build/
-
Ghost 3D Model
Ghost for Maya 2014Complete with color map*********************************File Formats:- Maya 2014- 3ds Max 2014- FBX (include texture)-OBJ*********************************
-
Ghostbusters Neutrino Wand 3D Print Model
Summary
This neutrino wand is based off the wonderful model by DancinFool82. There were a number of modifications I wanted to make to reduce filament used in printing and allow the use of 3/4 inch PVC pipe for the handles. I’m making a proton pack for my son and the handles need to be smaller.
I’ve split the main base to make it easier to print with minimal support. There are small guides modeled inside so the side panel will be easier to glue on. I’ve added a new mounting peg for the rear handle that has a base piece that slides on before the PVC pipe. This looks more like the original prop to me. The bottom base plate has been redone to allow the use of M2 screws to put it together. There are screw mounts in the main base and side pieces. This will allow access to the electronics after it’s put together.
The front handle parts have been reduced a little in size to match the smaller 3/4 inch pipe handle. For an adult I think 3/4 inch PVC is better anyway as it feels better in my hands as well. All of the parts have been cleaned up and checked for errors as well. I was having some issues printing some of the original parts.
I did not include the clippard valve. I’m using this one which is greathttps://www.thingiverse.com/thing:2286284
Print Settings
Printer:
Davinci Mini Rafts:
No Supports:
Yes Resolution:
.2-.3 Infill:
20-50 Notes:
The bottom base model has some circles on the edges that rip off easily after printing to keep it from warping because my slicer wouldn’t add a brim.
Printing at .3 for all parts took about 24 hours. I’ve printed a lot of prototypes so it’s hard to say for sure. It all came out really well though.
