This download includes an IMM Brush created for Zbrush 4R6 (compatible with R5) and is made up of 182 individual Mech Parts in addition to the original 182 x .OBJ files and 1 x .ZTL that can be downloaded.
Tag: Gears
-
Custom Wade’s Gears for 1.75 (.300 ~titan ratio) 3D Print Model
Summary
Custom Wade’s Gears for 1.75 (.300 ~titan ratio)
The big gear is 10mm, the small is 12mm centered. it runs better and truer… it has a nut trap for a M3, also it does have a D shaft on the small gear. Big gear is for 8mm hobb bolt. -
Pitan Geared Extruder (thinner tighter gears remix) 3D Print Model
Summary
These are the remixed gears I used in my Pitan make (https://www.thingiverse.com/make:493744) that are 5mm thick and have very tight D shaft and Hex Bolt Head fit. I ended up using Nylon because the small gear D shaft warbled out when I used PLA. Also as I mentioned in my make, I bought the hardware in bulk so send me a message if you would be interested in a set that includes the nuts, bolts, screws, washer, bearings (a 623 and two 695s or 625s), mk8 gear, spring, 3 meters of Nylon filament (enough to print gears twice), metal bowden groove mount, and some ptfe tube. -
Engineering Parts 3D 3D Model
Engineering Parts 3D modelCollection of 20 engineering parts exported from Solid Works- HIGH poly models- includes custom made HDRI studio light- render ready
-
FreeCAD Gears 3D Print Model
Summary
Not a model for anything in particular, nor is it meant for directly printing, but just an easy way to make gears.
Contains a spreadsheet where you can enter the number of teeth you want, how far apart the gears are, and how thick they should be.
Holes for shafts and keyways can then be made using sketches and cut out of the gears.
Made with FreeCAD 0.17 (build 12643), may not work with other/earlier versions.
Ignore the STL file, thingiverse apparently wants some sort of model file for the thing to be valid and doesn’t recognise FreeCAD files as being valid design files.
[email protected]!$ Come on thingiverse, FreeCAD has been around forever. Get it together. -
Gears Cogs 3D Model
WELCOME TO 3DFORMATIONSYou are guaranteed precision component assembly with clean mesh and product lines for HIGH AND LOW POLY based model DATA.FULL SETUP READY TO RENDER FOR: (KEYSHOT) USERS ONLY.YOUR DOWNLOAD FILE INCLUDESX1 3DSX1 IGESX1 OBJX1 3DM RHINOX1 BIP KEYSHOT + MATERIAL MAPS + ENVRIOMENT MAPIMPORTANT: SETUP ROOT PATHS TO ALL MAPS (INCLUDED) FOR CORRECT KEYSHOT (RENDER) SETUP.PLEASE CHECK OUT MY OTHER MODELSCLICK ON MY USER NAME (3DFORMATIONS) AT THE TOP OF THIS PAGEFOR MORE INFORMATION GOOGLE (KEYSHOTS) ITS FAST EASY TO USE FOR STUNNING RESULTS
-
Gear Ring Free 3D Model
The edges revolve around each other. Spinning in opposite directions because of the gears in between. Satisfying and fun way to keep your fingers busy. Super smooth, satisfying, and fun. Print with SLA
-
Gear Ring Free 3D Model
The edges revolve around each other. Spinning in opposite directions because of the gears in between. Satisfying and fun way to keep your fingers busy. Super smooth, satisfying, and fun. Print with SLA
-
Double Fidget Spinner with Gears 3D Print Model
Summary
Its a double fidget spinner, spin one side and the other side spins on its own -
Customizable Remix of DJI Spark Floats Water Landing Gears 3D Print Model
Summary
Remix of the floats by “modelsport”. This version has the complete floating gear in one piece – no gluing required. Each gear weights ~30g, so the four add ~120g to the Sparks weight of ~300g.
Attention: With these floats, the Spark neither swims nor flys well! Please watch the video at https://youtu.be/lQo1Fi36_p4 to see what I mean. Maybe with a later firmware update, the copter gets more stable for such kinds of extra weight, but for now…
Useful ball radius values are between 32mm (-> 550g) and 40mm (-> >1kg). Anything below 32mm has a big risk of the Spark touching water during landing.
You may customize the following values:
numFloats – the number of gears to render
ballRadius – a value between 32 and 40
armRadius – the radius of the arm between the motor cover and the ball.
Use rafts to achieve strong contact to the build plate. Paint the balls with coat after printing for better durability. Use the “PaintSupport” model to print a support plate for painting the gears.
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 Plus Rafts:
Yes Supports:
No -
Photo-realistic Weapons For Games VR – AR – low-poly 3D model 3D Model
Video : https://youtu.be/_C5gfUTJRHYA Collection of photo-realistic weapon models for use in games,the model has 3 level of details and all models optimized for game workflow4K textures are included with this packGUNS1. AR Gun(Two Types)2. Basic Gun Model3. SR Gun4. Tactical Gun5. Attachments(Bayonet, Com-pm, Flash Light, Grip, Holo,Iron-sights,Reticle, Silencer)
-
High End gear and chain 4k textures 3D Model
High end 4096×4096 textured bike gear with chain.AlbedoNormalSpecularGlossAvailable formatsfbxobj
-
Mechanical Cylinders 3D Model
Mechanical Cylinders to use as parts of mechs or on it’s own.There is a total of 9 mechanical cylinders.Each of the Cylinders is in Highpoly and 20% decimated.The package includes:- Zbrush of high-poly models with separated polygroups.- Zbrush of decimated models.- Max file containing highpoly models and render scene with Default Scanline.- OBJ high-poly cylinders.- OBJ decimated cylinders.Software versions used:- Zbrush 4R6- Max 2010- OBJPolygons:High-poly:cyl1 657532cyl2 2472166cyl3 122010…Decimated:cyl1 127728cyl2 489954cyl3 22962…
-
Table Clock 3D Model
This is a high poly model of table clock with all materials ready for render in mental raySize of the clock 300x130x100 mmPresent studio lighting and .mb .fbx .obj .mb( v2015 ) All Archives contains all materials texture-maps with logical namesThe model contains materials with the following Texture-Maps:Files Format PNGBolts_M 1024 1024 (Bitmaps: Base_Color, Metallic, Roughness)Case_M_2 2048 2048 (Bitmaps: Base_Color, Metallic, Roughness)Case_M 4096 4096 (Bitmaps: Base_Color, Roughness)Dial_M 2048 2048 (Bitmaps: Base_Color, Metallic, Roughness)Gears_M 4096 4096 (Bitmaps: Base_Color, Metallic, Roughness)hour_hands_M 1024 1024 (Bitmaps: Base_Color, Metallic, Roughness)Stand_M 2048 2048 (Bitmaps: Base_Color, Metallic, Roughness, Height, Reflection)
-
Non-circular gears 3D Model
.3D model of non-circular gears.Animated.Modeled in 3ds Max 2015.Rendered with Thea Render.3D model files in this package:- 3ds max 2012 (scanline, with animation)See short movie clip below….
-
Multi-Color Dissolvable Gears 3D Print Model
This 3 Gear demo shows how Palette+ can enable your single extruder printer to create models using dissolvable supports.
-
Engine Flywheel 3D Model
High detailed 3d model of engine flywheel.The model was modeled in 3ds max.Two .max files with V-Ray and Standard 3ds Max materials.Previews rendered with V-Ray.Many other 3d engine parts available in this series, search for GANDOZA
-
3D Airbus A320neo 3D Model
High detailed Airbus A320neo 3d model.Textured as Airbus.Previews were rendered with vray.Plane diffuse textures are 4096×4096 pixel resolution. (5 maps)Plane bump textures are 4096×4096 pixel resolution. (5 maps)Plane specular textures are 1024×1024 pixel resolution. (5 maps)Engine diffuse texture is 2048X2048 pixel resolution. (1 map)Engine bump texture is 2048X2048 pixel resolution. (1 map)Engine specular texture is 1024X1024 pixel resolution. (1 map)Landing gears diffuse texture is 2048X2048 pixel resolution. (1 map)Landing gears bump texture is 2048X2048 pixel resolution. (1 map)Landing gears specular texture is 1024X1024 pixel resolution. (1 map)Reflection texture is 1200×600 pixel resolution.Actions on the previews are samples.All animatable parts (incoming flaps, outgoing flaps, ailerons, spoilers, nose landing gears, main landing gears, gear hatches, fan discs, passenger doors, cargo doors, engine caps, elevators, nose radome and rudder) are named as separately.Poly count can be reduce to approx 282,000 without landing gears.All parts are named separately.Total object count is 223.
-
Airbus A320neo Generic White 3D Model
High detailed Airbus A320neo 3d model.Textured as generic white.Previews were rendered with vray.Plane diffuse textures are 4096×4096 pixel resolution. (5 maps)Plane bump textures are 4096×4096 pixel resolution. (5 maps)Plane specular textures are 1024×1024 pixel resolution. (5 maps)Engine diffuse texture is 2048X2048 pixel resolution. (1 map)Engine bump texture is 2048X2048 pixel resolution. (1 map)Engine specular texture is 1024X1024 pixel resolution. (1 map)Landing gears diffuse texture is 2048X2048 pixel resolution. (1 map)Landing gears bump texture is 2048X2048 pixel resolution. (1 map)Landing gears specular texture is 1024X1024 pixel resolution. (1 map)Reflection texture is 1200×600 pixel resolution.Actions on the previews are samples.All animatable parts (incoming flaps, outgoing flaps, ailerons, spoilers, nose landing gears, main landing gears, gear hatches, fan discs, passenger doors, cargo doors, engine caps, elevators, nose radome and rudder) are named as separately.Poly count can be reduce to approx 282,000 without landing gears.All parts are named separately.Total object count is 223.
-
Loft Shaft Gears Lamp 3D Model
High resolution model of Loft Shaft Gears LampImages below are rendered using Corona render 1.5. – Model has real-world scale and centered at 0,0,0- All pivots are in right place- No cleaning up is necessary. Just merge your models into the scene and start rendering.- Bulb model is included.The scene has millimeters units scale.Size: 1031 mm (Height), 108 mm (Width), 108 mm (Length).Ready for HD rendering.Hope you like it! Please don’t forget to rate the model. Your feedback is very important for us 🙂
-
A320 neo Landing Gears 3D Model
High detailed A320neo landing gears 3d model.Previews were rendered with vray.Scene includes two main landing gears and one nose landing gear.All parts are (tires, rims, gearshaft, arms, pipes, cables, pistons etc) named as separately.All parts are named separately.Total object count is 82.Diffuse texture is 2048X2048 pixel resolution. (1 map)Bump texture is 2048X2048 pixel resolution. (1 map)Specular texture is 1024X1024 pixel resolution. (1 map)Reflection texture is 1200X600 pixel resolution. (1 map)
-
100 low-poly gears-kitbashes and machine parts 3D Model
100 low-poly gears-kitbashes and machine parts
In collection HDRI+materials -
Axle and driveshaft 3D Model
Free File Conversions: Need this 3d model in another format? please Contact Support to verify we can provide the format you need.
-
Tri-Spinner with Gears
Summary
This was made via a combination of http://www.thingiverse.com/thing:2084477 pencil top Fidget spinner and a standard tri-spinner.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
No Resolution:
.2 mm Infill:
20%
