Furniture table tables tisch glas office dining wohnzimmer esszimmer vitrine glass design detroit FT
Tag: ft
-
Ansaldo L3 35 FT 3D Model
ANSALDO FIAT L3 L3-33 L3-35 FT TANK MILITARY WEAPON WAR italy italian royal army 1933 1945
-
FT 90 Degree Tool 3D Print Model
Summary
I decided to make a simple little tool which helps keep your angle straight when you glue your foam board together to make sure that it’s at 90 degrees on the A or B fold. for Flitetest or other foam board planes. I hope you find this little tool useful -
FT Power Pod 182mm 3D Print Model
Summary
A printed power pod for your FT designs! Don’t worry about cutting out any more firewalls or folding foamboard; just hit print! I have tested this on the following FT planes: Bloody Baron, Simple Cub, Nutball, Bloody Wonder. Versawing, FT Delta. Leave a comment if it works for you on other aircraft.
This is slightly shorter than the FT power pod plans, but is designed to print in one piece vertically, with the firewall facing down, on most printers.
Includes stl file with and w/o holes for motor mounting. Holes are 4mm at standard 16mm and 19mm widths.
Also has cutout in bottom of pod for XT60 connector pass through.
Enjoy!
JGplanes
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
.20 or .30 Infill:
10% fast honeycomb at 90* offset Notes:
Print with PLA or PLA+
Print with firewall flat on print bed. For a solid firewall, make the bottom 11 layers solid if your software supports this.
The included gcode is with the following settings:
Layer height: .30 (works well with .20 also, but adds 1hr to print time)
Bottom solid layers: 11 (this is for a solid firewall when printed vertically)
Outline perimeter shells: 1
Top solid layers: 3
Infill: 10% fast honeycomb with 90 offset
Extruder temp: 210
Bed temp: 75*
Support material: Yes (probably not needed since it is only for the XT60 connector hole.
Post-Printing
Drill your own holes in the sides for barbecue skewers to pass through, since this differs for different designs.
Dispose of support material in XT60 pass through if desired. -
FT Cub Rear Wing Support 3D Print Model
Summary
Upgrade part for the Flite Test Simple Cub RC airplane
When built to the plans the back of the wing that sits on the fuselage does not have a lot of support. The force that the rubber bands exert on the wing can fold the back part of the wing and mess up the wing angle. Two of these supports attached to the wing in that problem area will correct the problem.
I printed two supports with PLA, roughed up the surfaces to glue with sandpaper, and then hot glued the supports in place.
The position of the supports is a few millimeters in from the edge of the fuselage with the wing mounted to leave a bit of space for some rubber band protectors.
I also smear a thin layer of hot glue over the area of the wing that contacts the fuselage to better hold it in place so it doesn’t slide around. This includes the surface of the supports.
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 V2 Rafts:
No Supports:
No Resolution:
0.2mm Infill:
100% -
Renault FT17 3D Model
Renault FT17 FT-17 FT 17 turret tank fully rotating world war wwi wwii ww1 ww2 armament french estonia 3d model perspectx battletank battle military
-
Junk Ship 3D Model
Ship vessel junk Ming dynasty 300 ft Chinese Zheng ocean going cargo-carrying boats treasure fleet circumnavigation Naval historical Nautical
-
FT Simple Soarer Custom Motor Mount 3D Print Model
Summary
Custom motor mount for the Simple Soarer. This gives the Simple Soarer a much more aerodynamic front end.
IMPORTANT NOTE:
This has a 5 degree down tilt built in so make sure you put it with the motor wire hole on the top.
Print Settings
Rafts:
No Supports:
No Infill:
15% -
Volvo VNR 300 Container 3D Model
Realistic 3d model of VOLVO VNR 300 with the semi-trailer container- file includes only the model without the environment. Cameras, lights,render settings are not included!- High quality polygonal model – correctly scaled accurate representationof the original objects (system units – mm)- coordinates of the location of the model in space (x0, y0, z0)- modelled in 3ds Max 2009. Final images rendered with V-Ray 1,5 SP2- Materials are used only in 3ds Max a file (multi-sub, V-Ray) 30materials. There is also a file with standard materials- textures are included and mapped in every format- Textures formats: JPEG- Materials, textures, objects have the correct names
-
Pool Table 3D Model
Low poly Pool Table. Game Ready with PBR (Metalness or Specular) / V-Ray material. The normal map was baked from a high poly model.Specular workflow textures are included in ‘specular-glossiness.rar’.Scene – Polygons: 2180, Vertices: 1937.Ball – Polygons: 72, Vertices: 62.Cue – Polygons: 60, Vertices: 52.Table – Polygons: 842, Vertices: 765.Triangle Rack – Polygons: 120, Vertices: 120.Chalk – Polygons: 6, Vertices: 8.- Preview images rendered with Marmoset Toolbag 3.- Unwrapped UVs, non-overlapping.- Model has real-world scale and is centered at 0,0,0.- Textures use meaningful names.- Stripped texture path names.- Units: Centimetre.- Background and HDRI are not included in the file.- Descriptive and unique object names.- Textures resolution: 4096×4096; Format: .PNG; *4 textures for metalness ( base color/ metallic/ roughness/ normal) in FBX,OBJ and Collada. *4 textures for specular ( diffuse/ glossiness/ specular/ normal) in 3Ds Max (default Scanline) *5 textures for V-ray ( diffuse/ glossiness/ reflection/ fresnel ior/ normal ) in 3Ds Max (V-ray) – Model tested Marmoset Toolbag 3 & Unreal Engine 4.Ambient Occulsion texture is included in ‘ambient-occlusion.rar’.
-
3D model Renault FT-17 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Renault FT-17 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
UAV Control Containers Collection 3D Model
GeneralUAV control containers collection is 4 high quality CheckMate lite certified models of a ground control stations (GCS), land or sea based control centres that provides the facilities for human control of unmanned aerial vehicles UAVs drones.All models are made from segments, built with great attention to small details, high exact and realistic proportions with correct geometry. All Objects are properly named, with named materials and textures. native 3d model format is: 3ds Max 2012.Specification of UAV controls collection:1. 10 ft UAV Controls Container – CheckMate Lite CertifiedProduct ID: 1124796 – Individual Model Price: 59$Model Specifications: Polys: 78668; Verts: 83125UV Mapped textures – 10*.jpg2. 10ft UAV Container – CheckMate Lite CertifiedProduct ID: 1134620 – Individual Model Price: 59$Model Specifications: Polys: 76273; Verts: 80785UV Mapped textures – 9*.jpg3. UAV Controls Container – CheckMate Lite CertifiedProduct ID: 1114034 – Individual Model Price: 59$Model Specifications: Polys: 75762; Verts: 80554UV Mapped textures – 8*.jpg4. UAV Controls Container – CheckMate Lite CertifiedProduct ID: 1125794 – Individual Model Price: 59$Model Specifications: Polys: 77545; Verts: 82910UV Mapped textures – 9*.jpg/pngGeometryHigh level of detail with the best compromise of the polygons number.All details have been fully modeled out making the models ideal for closeups and print work.All models are CheckMate Lite CertifiedGeometry: Polygonal Quads/TrisMaterial and TexturesAll objects have UVW Mapping projections.Models use *.png/jpg textures, resolution depends on the importance within the model.RenderingRender is done with non-illuminated 3ds Max 2012 version with standard materials.Lighting and environment are included in 3ds Max 2012 version.Rendered by default, no 3rd Party Plug-ins required to load files or render scene.Models look like the thumbnails.