3DHunt.co

Tag: FT-5

  • FT-5 Adjustable Glass Holder – remix (heat insets) 3D Print Model

    FT-5 Adjustable Glass Holder – remix (heat insets) 3D Print Model

    Summary
    Remix of the FolgerTech FT-5 Adjustable Glass Holder (https://www.thingiverse.com/thing:2260982) I didn’t have enough of the 3mm square nuts to make the other version, but I do have heat insets that work quite nicely. This version is essentially the same as the original, but a little taller, and configured for heat set inserts instead.
    Best printed in ABS or some other heat-resistant material.
    The inserts I used and designed for are on Amazon here:https://www.amazon.com/gp/product/B077CL322T
    Print Settings
    Printer:
    FolgerTech FT-5 R2
    Rafts:
    No
    Supports:
    No
    Resolution:
    0.1
    Infill:
    30%

  • rj45 dual breakout board mount for maker713 light for ft-5 3D Print Model

    rj45 dual breakout board mount for maker713 light for ft-5 3D Print Model

    Summary
    ive tested this and the belt moves freely behind the bracket and the breakout board is still mounted below for clean wiring
    Print Settings
    Rafts:
    No Supports:
    Yes Resolution:
    .2mm layer height

  • FT-5 E3D Mount + Sensor Mount 3D Print Model

    FT-5 E3D Mount + Sensor Mount 3D Print Model

    Summary
    This is an updated version of the FT-5 E3D Stock Bowden Mount V4. I’ve add a mount for an inductive senor.

    Print Settings
    Printer Brand:
    SeeMeCNC Printer:
    Rostock MAX v2 Rafts:
    No Supports:
    Yes Resolution:
    .25 Infill:
    40% Notes:
    REMOVE the supports from all holes!!
    Printed with PETG 245C 70C bed.

  • FolgerTech FT-5 + E3D Part Cooling Fan 3D Print Model

    FolgerTech FT-5 + E3D Part Cooling Fan 3D Print Model

    Summary
    Wanted to design a simple to print part cooling fan for the FolgerTech FT5 with a E3D V6 hotend.
    No extra parts required, just some glue.
    Dry fit both parts, once happy use some super glue to secure the shroud.
    The mount was fitted for a 40mm x 40mm fan.
    Print Settings
    Printer Brand:
    Printrbot Printer:
    Printrbot Simple Metal Rafts:
    No Supports:
    Doesn’t Matter Resolution:
    .2 Infill:
    20 Notes:
    May or may not need supports.
    How I Designed This
    Designed with TinkerCad

  • Raspberry Pi Holder Folgertech FT-5 Pi Cam 2020 Frame Octoprint 3D Print Model

    Raspberry Pi Holder Folgertech FT-5 Pi Cam 2020 Frame Octoprint 3D Print Model

    Summary
    Raspberry Pi Holder for Folgertech FT-5 with Pi Cam.
    For 2020 Alu Profile, Octoprint.
    With place for 12V to 5V Step Down and and holes for cable managment.