Ambulance FPV DroneA High polygon count 3D model of a Ambulance FPV Drone , designed for use with in 3ds max with corona renderer.Poly-count: 149 069Vertex-count: 130 089This package contains following items:- One 3ds max file setup with corona renderer 2 plug-in (you need the plug-in in order to use this file properly)- One 3ds max file setup with Vray 3.6 plug-in (you need the plug-in in order to use this file properly)- One FBX file for import of the 3D models in all major 3D packages (no shaders).- One OBJ file for import of the 3D models in all major 3D packages (also no shaders).- One .3ds file for import of the 3D models in all major 3D packages (also no shaders).- High resolution Texture up to 8196 x 8196 px.Notes :- Preview images rendered in corona renderer 2, no color correction and no post production.- For best results, this model is recommended for use(render) on computers with at least 08 gigabytes of RAM.- Object is centered at (0,0,0).(!) Attention- the model is not rigged- the model is not suitable for 3D print- the scene setup / lighting / environments from the preview renders(rendered with Corona) are not included- the meshes are not suitable for subdivision, but this should not be necessary since they are already optimized for closeup beauty shots- it is an artistic representation of the subject, it is not 100% technically accurate, but still highly detailedFeel free to ask additional questions should you have any, (click the Author name on the left to enter his profile and then use the green contact button on the right to get to him).Thanks, and as usual, have fun!
Tag: fpv
-
FPV Racing drone 3D Model
FPV Racing DroneA High polygon count 3D model of a FPV Racing drone, designed for use with in 3ds max with corona renderer.Poly-count: 124 759Vertex-count: 117 187This package contains following items:- One 3ds max file setup with corona renderer 2 plug-in (you need the plug-in in order to use this file properly)- One 3ds max file setup with Vray 3.6 plug-in (you need the plug-in in order to use this file properly)- One FBX file for import of the 3D models in all major 3D packages (no shaders).- One OBJ file for import of the 3D models in all major 3D packages (also no shaders).- One .3ds file for import of the 3D models in all major 3D packages (also no shaders).- High resolution Texture 8196 x 8196 px.Notes :- Preview images rendered in corona renderer 2, no color correction and no post production.- For best results, this model is recommended for use(render) on computers with at least 08 gigabytes of RAM.- Object is centered at (0,0,0).(!) Attention- the model is not rigged- the model is not suitable for 3D print- the scene setup / lighting / environments from the preview renders(rendered with Corona) are not included- the meshes are not suitable for subdivision, but this should not be necessary since they are already optimized for closeup beauty shots- it is an artistic representation of the subject, it is not 100% technically accurate, but still highly detailedFeel free to ask additional questions should you have any, (click the Author name on the left to enter his profile and then use the green contact button on the right to get to him).Thanks, and as usual, have fun!
-
Simple FPV Inspired tool box 3D Print Model
Summary
This is just a simple tool box designed around the idea of keeping the amount of tools to minimum but still having enough with me for minor repairs.
This is geared towards FPV racing as the logo suggest.
Print Settings
Printer:
Hyper cube evo
Rafts:
No
Supports:
No
Resolution:
.100-.300
Infill:
50%
Notes:
Note the tool box printed in the pictures was printed @ 1.25 on the Z axis to make room for additional tools.
How I Designed This
fusion 360 -
Viper X210 FPV Quadcopter Frame with bigger esc slits 3D Print Model
Summary
basically this is the same frame but i made room for bigger escs as in the original frame my escs would be clipped by the props. i’ve deppend the slits where the escs go witch makes the frame even more fragile if you print in pla.
Print Settings
Rafts:
Doesn’t Matter
Supports:
Doesn’t Matter
Notes:
i recommend you stick to the settings of original Viper X210, and also avoid pla as i have now shattered my frame on one of the support arms.
How I Designed This
3d builder
i used windows 10’s 3d builder and subtracted out the slots for my escs. -
LST – S2 5.8G 800TVL HD Micro CMOS FPV Camera template 3D Print Model
Summary
Template for all-in-one LST – S2 5.8Ghz 800TVL Micro CMOS FPV camera.
You can find it at 10$ at amazon or Gearbest. Made with Designspark Mechanical. -
Micro FPV Camera to HS1177 Size Adapter 3D Print Model
Summary
This is a simple adapter to allow me to fit Micro cameras into models designed for ‘full size’ HS1177 style cameras. I’m sharing this in case others find it useful!
It should make the lens of the Micro Camera present at the front of the model roughly where the camera of a full sized FPV camera would be. There are holes to secure the Micro camera into the housing and two more that replicate the ‘standard’ mounting holes on a full sized camera.
Hope it’s useful to someone! 😀
Print Settings
Printer:
Turnigy Fabrikator II Mini
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
30-50%
Notes:
Flip it 180 degrees for an easy print… -
FPV Helmkamera MK2 3D Print Model
Summary
Kamera:https://www.amazon.de/gp/product/B01CJ4FJ6O/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
5,8GHz Sender:https://www.amazon.de/gp/product/B00O7JK5CI/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
5,8GHz Antennen:https://www.amazon.de/gp/product/B06XKRXHB5/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 -
Fan mount for FatShark Transformer FPV Goggles 3D Print Model
Summary
Simple design to add one or two fans to the FatShark Transformers. Everything is a tight fit but can be fitted without sanding depending on print quality.
Fans that i used on my Transformers
Braided cable sleeve i used.
https://www.amazon.com/gp/product/B073YL2CL6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Wire connector
-
FPV Googles Holder 3D Print Model
Summary
I designed this to hold my googles to the pole of my ground station. The googles sit in there quite nicely and can be strapped in position more firmly with a battery strap.
Printed in TPU with 10% fill. -
XL-RCM 10.0 PIXXY: Pocket drone / FPV quad Remix 3D Print Model
Summary
I chopped up the original model to print with no supports but some glue, a little sanding and patience are required. PLA
Print Settings
Printer:
Deegreen Rafts:
No Supports:
No Resolution:
100 μm Infill:
30% Notes:
I chopped up the original model to print with no supports but some glue, a little sanding and patience are required. PLA -
ParaTank_215 5″ FPV Racing Drone Quadcopter super light & sturdy 3D Print Model
Summary
Made for micro-swift type cams (19mm width).
ParaTank_215 5″ race quad with swappable arms.
Slightly beefier than typical race frames but still at only 66g with awesome CG (top or bottom mount optional), slotted arms, cam protection (runcam micro type) and super low body and arm profile for minimum air resistance and loss of thrust… Also with printable arm tpu arm protectors+motor softmounts (And it looks cool) 😀
Mill it youself or get it in Armattan CF (67g) here:
https://armattanproductions.com/pages/kit_detail/1449 -
Foldable quadcopter FPV 3D Print Model
Summary
This project is not completed yet … however for those who is interested in there is also FreeCAD file available. -
Kinetic Aerial Spear-X FPV Camera Mounts 3D Print Model
Summary
Simple FPV camera mounts to fit either 1177 style camera or the Micro.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
.20 Infill:
100 Notes:
TPU/TPE -
Fpv logo 3D Model
High-poly 3D model.Model is made in Autodesc Maya 2012. For convenient use of the model, all сomponents are named.The model can be used in the manufacture of games,rendering images,videos.
-
FPV SMA Connector Thumb Wheel 3D Print Model
Summary
This printed part fits the 8mm SMA connector nut used on FPV gear. It slips over the nut portion making it easy to tighten/loosen the nuts without a wrench. I print one for each SMA connector and leave it in place. Using PLA the weight is just .25 gm.
There is a small and large version. The large has an outside diameter 1.5 mm larger then the small. I use the small for tight places such as a 45° or 90° fitting. I use the large where there is plenty of room to grasp and turn. You can get the nut slightly tighter with the large version.
Both versions have a .5mm slit to provide a little spring. This allows it to slide easily over the nut and allows for expansion and contraction from summer heat to winter cold. -
Nerf FPV 3D Print Model
Summary
Experience your Nerf battles in a new way.. Mount this FPV system on a Nerf gun, find an open and safe area, put a set of goggles on and battle away. Add a DVR system and record your battles in first person view, it’s like playing a video game but you are in the game.
Print Settings
Printer Brand:
Robo 3D Printer:
R1 ABS + PLA Model Rafts:
No Supports:
No Resolution:
.100-.300 Infill:
100% Notes:
Some sanding may be required to achieve a clean fit.
How I Designed This
fusion 360 -
Ultra low fpv cam pan system – ULCMS 3D Print Model
Summary
I wanted to get my new FPV wing pan control to fpv camera. There was no ultralow versions available. But now there is!
Behold of mighty, most awesome ULCMS!
Attach 9g servo to baseplate with 2-sided tape and secure it with ziptie. Use 3mm screw to attach camera plate to baseplate, do not over tight!
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
No Supports:
Yes Resolution:
0.2 Infill:
25%
Post-Printing
Servo gear might have very tight fit, so ream unnessary away. -
BOOMERANG90 – Prototype FPV Racing Frame – V0.1 3D Print Model
Summary
My new NEXT GEN Racing drone
BOMERANG90 (Boomerang wtih rotated half)
Low center of gravity – battery is under upper part
Preinstalled GoPro mount
A lot of space for components
TELL ME IN COMMENTS WHAT DO YOU THINK ABOUT THIS FRAME, EVENTUALLY WHAT WILL YOU IMPROVE 🙂
(This one is in size of 2″inches micro, but final version could be for big size racing quads) -
HS1177 or Micro FPV Cam Mount – 30.5 mm spacing 5mm standoff 3D Print Model
Summary
This mount will work for either an hs1177 or a micro fpv cam -
Mebi 130 – a 130mm fpv quadcopter frame 3D Print Model
Summary
I crashed and broke my Youbi 130 frame, so I decided to design and print a new one. The frame I made is an X style quadcopter that fits all of the electronics from an “Awesome Youbi 130”.
The weight of my printed frame was 36.1 grams. I will see if I can get weight lower and frame stronger. I just printed the first one and am testing it now. Seems great, but I haven’t crashed it too badly yet 😉
Electronics:
Flight controller -https://www.banggood.com/Youbi-XV-130-F3-Flight-Controller-Integraded-25mW-200mW-400mW-40CH-5_8G-VTX-FPV-Transmitter-p-1134566.html?p=WL2504207536201306OF (Any standard size FC will work. The AIO saves space nicely.)
Speed Controllers -https://www.banggood.com/Youbi-XV-130-PDB-XT60-Integraded-4-in-1-BLHeli_S-20A-ESC-Power-Distribution-Board-for-FPV-Micro-Race-p-1134565.html?p=WL2504207536201306OF 4 in 1 20A ESC (any similar size 4 in 1 esc should work)
Motors -https://www.banggood.com/Youbi-XV-130-XV-130-1306-3600KV-Mini-Micro-Motor-2S-4S-For-FPV-Racer-p-1119162.html?p=WL2504207536201306OF 1306 Brushless 3600kv
Propellers –
Up to 3″
I am working on the camera hood now and will post it once I make on that I like.
Thanks for looking!
Print Settings
Printer:
Malyan M180 Rafts:
No Supports:
No Resolution:
0.2 Infill:
100%
How I Designed This
I used a free design program called designspark mechanical -
correction pour Skyzone & Fat shark
correction pour Skyzone & Fat shark maison
à votre vue , à partir de vielles lunettes ou de lunettes locost de grande surface…
vidéo : https://youtu.be/r9F1C3m7ThE
