Summary
Small fidgeting toy.
Inspired by Make Anything’s twisted toy design.
Print Settings
Printer Brand:
Creality
Printer:
CR-10 Mini
Rafts:
No
Supports:
No
Resolution:
0.1 mm
Infill:
100%
Notes:
Use 100% infill to gain some weight or fill the twisted tube with some material (could use a glue gun). Don’t forget to print 2 End_caps.
Post-Printing
Get better results by sanding the model. I use 400 grit sandpaper first and then 1000 grit.
Tag: fidget
-
Fidget Slider 3D Print Model
-
Fire Fighter Fidget Spinner 3D Print Model
Summary
Thanks to all the fire fighters out there. I made this for one of my buddies that is a retired firefighter!
Bearings= 608-2RS Skateboard Bearing
I recommend printing with taulmen 910 or my personal favorite (eSUN 1.75mm ePA-CF Carbon Fiber Filled Nylon Filament )
Check out https://www.jpsev.com/designs for more things and filament!!!
Im still working on the web site so be patience thx!!
Print Settings
Rafts:
Doesn’t Matter
Supports:
Doesn’t Matter
Resolution:
.2mm with .4 nozzle
Infill:
25 percent -
Fidget Hand Roller/Spinner Toy 3D Print Model
Summary
This is SUPER FUN to use and addicting. In my opinion it is better than a fidget spinner. Just find 6 608 bearings (fidget spinner bearings) and put them in. Then push the other plastic peice on the top to keep the bearings in. btw If you have small hands then it might be hard to play with it.
Also check out this video
l l
l l
V
How I Designed This
Made using Onshape.comCustom Section
-
Snowflake Fidget Spinner 3D Print Model
Summary
A fidget spinner shaped like a snowflake.It is very large and needs a 200×200 bed surface.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
Doesn’t Matter Infill:
10%
Post-Printing
Add a bearing and bearing caps. -
Kururin rolling stick weighted fidget toy tumbler 3D Print Model
Summary
Kururin rolling stick weighted fidget toy tumbler
This Kururin rolling stick is designed to be weighted on the extremes of the fidget toy for improved rolling thumbler toy effect.
Print 100% infill rectilinear
The design will form an interior air chamber without support material and the rolling stick will keep sealed. -
Fidget Spinner 3D Model
-Created originally with Cinema4D R18-Requires no plugins-Parts could be separated manually-Realistic and detailed-inner components including ball bearings-preview images rendered by C4D Physical render~this is my first model uploaded here….feel free to leave comments :)thank you for visiting and have a good day 😉
-
Gear Ring Free 3D Model
The edges revolve around each other. Spinning in opposite directions because of the gears in between. Satisfying and fun way to keep your fingers busy. Super smooth, satisfying, and fun. Print with SLA
-
Gear Ring Free 3D Model
The edges revolve around each other. Spinning in opposite directions because of the gears in between. Satisfying and fun way to keep your fingers busy. Super smooth, satisfying, and fun. Print with SLA
-
Fidget Spinner Case 3D Print Model
Summary
I designed this to fit
this fidget spinner along with four of the same ball bearings -
Turtonator Fidget Spinner 3D Print Model
Summary
Made by request for a friend’s nephew, modeled off the critter’s back.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator 2 Rafts:
No Supports:
No Resolution:
.30mm Infill:
10% -
Oloid Wobbler (rolling fidget desk toy) 3D Print Model
Summary
This is a oloid wobbler! iterating on my rolling ellipse design i came up with this easy to print more aesthetically pleasing 3 part design! print all 3 peices without support and screw them together! Enjoy! -
Double Fidget Spinner with Gears 3D Print Model
Summary
Its a double fidget spinner, spin one side and the other side spins on its own -
three ray fidget 3D Print Model
Summary
This is actually a three ray fidget. The barrels’ diameter are 23 mm which is one mm more than real bearings. If you want to me customize please comment. Any remix please be free to do it. 3D print and enjoy it.
How I Designed This -
Council Ricks Fidget Spinner Badge 3D Print Model
Summary
Council of Rick fidget spinner! Make, and enjoy!
Don’t have a printer get prints made at www.animaspiritus.com
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 V2 Rafts:
No Supports:
No Resolution:
200 microns Infill:
7% Notes:
Uses a 608 bearing should slide in nice, you may need to glue the cap on for it to stay anchored. -
Oversized Fidget Widget Cube 3D Print Model
Summary
An oversized fidget cube for larger hands. This cube is 40mm by 40mm and perfect for those who need to tinker, fidget and toy with something while in a meeting or class.
The widget consists of a joystick, ball, spinning disk, hourglass, mechanical push button and flicking switch. All parts are able to be 3D printed and created with the addition of a small piece of clear 2mm acrylic perspex and some microbeads available from a local craft or hobby store.
All parts click together sans the push button which requires a spring from a pen to be inserted and then glued shut.
Print Settings
Printer:
ZYYX+ Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.20 Infill:
25% -
Customizable Paw-like Fidget Spinner (pick-a-weight) 3D Print Model
Customizable Paw-like Fidget Spinner (pick-a-weight)
Customize to select: -
Customizable Edgy Yin Yang Fidget Spinner (pick-a-weight) 3D Print Model
Customizable Edgy Yin Yang Fidget Spinner (pick-a-weight)
Easy to Customize -
Orbital spinner 3D Print Model
Compression-bonded ring spinner, contact adhesive should be used to strengthen the joint. Used bearings 608zz.
-
Micro Fidget Spinner 3D Print Model
Summary
This is a spinner I designed for my Neice
She is 5, so she has small hands.
Uses a 22mm bearing
The balls are 11mm / 7/16. Popular slingshot size.
I used Pachinko Balls
Cap is from https://www.thingiverse.com/thing:2403050
Print Settings
Printer:
Anet A8 with Titan Aero Rafts:
No Supports:
No Resolution:
0.1 Infill:
100% Notes:
I used a brim to help the cups adhere.
Super easy and fast to print -
Fidget Spinner 3D Model
Please Watch all the Pictures before buying, and If you like what you see on them, then decide whether to buy it or not.You will get necessary Textures in zip file.
-
PokeSpinner – The Pokeball Fidget Spinner 3D Print Model
Yes, this is the craze of 2016 and the craze of 2017 combined in one beautiful nonsense. 🙂
-
Fidget 9 nut 3D Print Model
Summary
This fidget has 6 legs of which 3 contain 1 nut each and the other 3 contain 2 nuts each. This is to make the fidget heavier to have more kinetic engery when spinning, but not too much to add exessive friction on the bearing. -
Fidget Spinner 3D Model
Fidget SpinnerThere are two kinds of spinners. Every spinner has rotate animation.You can can change spinner’s colors as you want.
-
Fidget Spinner Advanced 3D Model
3d-model of detailed advanced fidget spinner, made in 3ds max with Corona and V-Ray renderers.Great for closeup, perfect with meshsmoothHope, You will like it!
-
Fidget spinner star gold 3D 3D Model
The original file format Solidworks 2012 .sldprt others obtained by conversion. In the original file using standard materials and textures. When converting materials possible loss or corruption. In rendering a model of pictures Solidworks program. The catalog has a free model. Before buying a paid model, download free in the format that you need and check the compatibility with your program. Solidworks CAD system is compatible to create models for 3D printer. I did not publish data on the 3D printer model, there is no equipment available.To view in the original format, use the free eDravings program. Allows you to view the model in detail, as well as save in the STL format. eDrawings is free software that lets you view and print eDrawings(eDRW, ePRT, eASM), native SolidWorks documents (sldprt, sldasm, slddrw) , DXF, and DWG format files.The model is no animation and scripting.
-
Fidget spinner cube 3D Print Model
Spinning cube uses a 608 bearing and a 32mm x 8mm dowel to connect the two end pieces through the bearing.
-
fidget widget spinner 3D Print Model
Summary
print 1 with the ring, and 5 without
standard print settings -
Fidget Spinner 3D model 3D Model
This is a photorealistic model of a popular toy modelled and rendered in Blender. Textures were created in Substance Painter.The following model consists of:12298 polies,12227 verts.This purchase includes:.blend file without HDRi, lightning or scene.obj.fbx2K textures for metal/roughness workflow:Base Colour,Metallic,Normal,Roughness,Height.
-
Fidget Spinner 3D Model
This is a photorealistic model of a popular toy modelled and rendered in Blender. Textures were created in Substance Painter.The following model consists of:12298 polies,12227 verts.This purchase includes:.blend file without HDRi, lightning or scene.obj.fbx2K textures for metal/roughness workflow:Base Colour,Metallic,Normal,Roughness,Height.
-
Flower Like Fidget With M10 Nuts 3D Print Model
For the spinner is required standard skate 608 bearing (inner di 8 mm, outer di 22 mm, width 7mm) and 5 M10 nuts.
-
3D HAND SPINNER FIDGET BUBBLE model Free 3D Model
ABS toy ready for 3D printing.Purchase the following mounting hardware:03 allen round head bolts M8x8 stainless steel01 Bearing 608ZZThank you.
-
Fidget Spinner 3D Print Model
Summary
This is my first attempt at drafting in 123 design.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
No Supports:
No Notes:
Currently having trouble with first layers. -
Game of Thrones Spinner 3D Print Model
The long night is coming and the dead come with it: Jon Snow
A tribute to Game of thrones fans. -
Fidget Spinner 3D Model
3D Model of Fidget Spinner. This is midpoly model with minimal polygon, clean geometry and nice surface flow.Perfect for adding detail and realism to your rendering projects. This model have detailed part, great even for close up render. Easy to use, just drop the model to your project and start render!Originally modeled in 3DS Max 2013, but i have included the multiple formats (OBJ, FBX and 3DS).
-
Fidget Cube 3D Model
Fidget Cube – a miniature cube with a number of buttons, switches, rollers, rotating disc and joystick, similar to the classic controller.
-
Generic Spinner Yellow 3D Model
Generic Spinner………………….FEATURES:- This model is a highquality, details enuogh to close-up render- Images preview take from V-Ray rendering and not edited- Models resolutions are optimized for polygon efficiency, apply smooth function to increase mesh resolution- All textures was strip paths, open the file and all texture will be connected automatically. – Real world scale, we offer a model with an error of less than 5%.- No object missing- Model with 3 and 4 sides only- No polygons with more than 4 sides- No object with isolated vertices, overlapping faces or overlapping verts- No poles or crease- Poly counts: 7 176- Vert counts: 7 172In 3ds max files:- Frezze tramsform to zero ( 0,0,0 )- Group: Yes- Object with Parents and Childen: Yes- Layer apply to manage: Yes- Named all object………………….FORMATS: 1. 3ds Max 2012 + Vray 2.0: Native format- Vray 2.0 ( full setup materials, lights and camera make rendering like image preivews)- Standard materials ( full setup materials: colors, reflect, translucent )2. Geometry and standard materials with textures. Amount reflect and bump are not set:- OBJ 2012- FBX 2012- 3DS 2012 3. Standard materials with textures.Amount reflect and bump are not set. – Maya 2012- C4D R12- Lightwave 11…………………..TEXTURES:- Textures highquality, enough for close-up render ( 2048 pixels )- UVWs mapping with mixed: overlapping and non-overlapping…………………..Beemaxx team:With over 3 years of experience working with 3D models. We give you all the very best in quality, save time. Our customers come from all over the world. We want to develop a strong community starts from the expanded 3d models market.- Also check out our other models, just click on our user name to see complete gallery.- Summit a product rating will help us very much
-
Hand Spinner 3D 3D Model
Realistic 3d model of Hand SpinnerFeatures:- Compatible with 3ds max 2014 or and higher – Materials and render: V-Ray 3, Corona Renderer – All objects, textures and materials have their own names- Polys: 4712- Verts: 4750Other format:- FBX version contains all the textures and materials – OBJ version comes without materials, however contains uvw mapping. – 3DS version comes without materials, however contains uvw mapping.Misc:- Textures and preview included in archive – Preview images rendered with V-Ray 3 – 3D model ready to use in your projects
-
Fidget Spinner 3D Model
3D Model of Fidget Spinner. This is midpoly model with minimal polygon, clean geometry and nice surface flow.Perfect for adding detail and realism to your rendering projects. This model have detailed part, great even for close up render. Easy to use, just drop the model to your project and start render!Originally modeled in 3DS Max 2013, but i have included the multiple formats (OBJ, FBX and 3DS).
-
Fidget Spinner 3D Model
This ‘Fidget Spinner’ is a high quality, photo real model that will enhance detail and realism to any of your rendering projects, detailed design that allows for close-up renders, and was originally modeled in 3DS MAX 2014 and rendered with V-Ray
-
SPINNER COFFIN – Accommodating the Death of Fidget Spinners 3D Print Model
I think it’s about time for this to be put to use
-
iPhone Spinner Case 3D Print Model
iPhone 6 / 6S case with a fidget spinner knob on the back. Works with a standard bearing that attaches to the case with a plug, and then a wheel snaps onto the bearing. The wheel has a slot for a 1/8″ bungee to go through that you can put your finger in to easily hold your phone – knot bungee from inside before putting around bearing.
-
Fidget Spinner Body 3D model 3D Model
Fidget Spinner Body=====================================Model:-Ready for subdivision-Readt for 3D printing (see netfabb screenshot)-Units: cm (7.18*6.62*0.6)-Holes: cm (0.22)=====================================Formats:-3ds max 2012 Default Scanline-FBX-OBJ-STL=====================================Thank you!Best regards, Miphody
-
Print-in M8 Fidget Spinner 3D Print Model
Summary
Designed to fit a 608zz bearing and 6 M8 hex nuts.
This fidget has the hex nuts inside of the print, so in order to get them in you must have your printer stop the layer before it begins covering the hex nuts. I recommend printing at a 0.2mm layer height and stopping it the layer before it begins to fill over the nuts, the height at which this occurs is 8.4mm. I achieved this by separating the process into two using Simplify 3D, however you can achieve the same effect using another slicer by editing the gcode to add in a pause at that layer. Make sure you push the nuts all the way down, they should fit nicely and the nozzle shouldn’t touch them when the next layer begins.
Enjoy!
Print Settings
Printer:
Micromake D1 Rafts:
No Supports:
No Resolution:
0.2mm Infill:
30 Notes:
Feel free to show your support by tipping me with bitcoin:
1QaLWG5rsPkLyCriwrX6DQonhbXRbEqK1 -
Imperial Crest Fidget Spinner 3D Print Model
Printed at .01 layer height with %100 infill (to increase weight) in black PLA (1.75mm) on a printerbot simple metal. bearing friction fits in place.
-
Fidget Cube 3D Model
FIDGET CUBE===============================- Modeled in Blender.- Preview image rendered using cycles.- All scene are included in .blend files.- Poly count are before sub division- Great for close up render.- All parts and materials are logically named.OTHER FORMATS=================- 3ds MAX- COLLADA (.dae)- Autodesk FBX- OBJ
-
Fidget Spinner Thumb Rest 3D Print Model
Summary
I really liked the thumb rest on this adafruit spinner design. However, one side is form-fitted for the thumb the other side wasn’t. Most thumb rests I see on Thingiverse were 2 parts where one side was completely flat. Not very comfortable. So I redesigned it so both sides were the same. It made it into 3 parts instead of 2, but the end result is much better. -
Radiation Fidget 3D Print Model
Summary
Uses 1 608 bearing and 3 0.5 inch nuts. Can be printed with no raft and low infill. Tested with 15% tetrahedral infill and rock solid. Printer calibration is key here as the bearing and nut will not fit snugly if marginally off sized.
Print Settings
Printer:
MonoPrice Maker Select V2.1 Rafts:
Doesn’t Matter Supports:
No Resolution:
0.2 mm Infill:
15% tetrahedral or equiv. -
Fidget Spinners 3D Model
High quality 3D model of two Fidget Spinners for your render projects.The models was modeled in 3ds Max 2012 and consists primarily of quads. Intended for subdivision and have TurboSmooth modifier. The model does not require textures. All preview images rendered using V-Ray.Lighting, environment, HDRI maps etc. are not included. Hand Spinner model only.No 3rd party plugin needed. Real world scale.Model dimensions:x: 122 mmy: 112 mmz: 13 mm
-
Celtic Knot Fidget Spinnner V2 3D Print Model
Summary
Celtic Knot Fidget Spinner meant to be used with Standard skateboard bearings eg.”608.”
This is version 2, it has slightly more rounded edges than the original.
Be Advised: I don’t have a 3D printer so I am not able to test this model. If you attempt to print this let me know what settings worked for you and I can add it to the description.
PS. I’m pretty new to this and would really appreciate your feedback on any tips you have on modelling for 3D printing. I have no idea what type of tolerances are common so the holes may need a bit of sanding to fit the bearing in.
Be sure to post photos if you do print this out. I’d love to see them! -
3D Fidget Spinner model 3D Model
Subdivisions:0 – Verts: 3,638 Faces: 3,6191 – Verts: 14,508 Faces: 14,5122 – Verts: 58,044 Faces: 58,048
-
Hand spinner Toy 3D Model
This is a realistic models of the Hand spinner Toy.The model is highly accurate and based on the manufacturers original dimensions and technical data.This model consists of great geometry, fantastic detail, and the materials and textures are included.The files are 3ds Max 2014, obj, fbx. The 3ds Max 2014 version is also optimized for V-Ray.This model Hand spinner Toy is ideal for photorealistic visualizations.Unpack the format you need and run in 3D editor.I hope you enjoy my work.Thank you.
-
Flower Like Fidget With M8 Nuts 3D Print Model
My young neighbor interested in spinners has also a younger sister =)
so a new design has arrived, again smaller to fit in kids hands. -
Fidget Spinner with Case Collection 3D Print Model
Summary
Simple elegant design with a nice little case. I made this to be portable and smooth. Each spinner holds 3 Pennies in each slot. The penny covers may need to be glued. The pennies and bearing are a press fit, but you can use any adhesion of your choice. The case has a snap fit lid, and is small enough to fit in your pocket.
Stop by my profile to check out some of my other designs :)https://www.thingiverse.com/Nukeman14x/designs
Print Settings
Printer:
Anet A2 Rafts:
No Supports:
No Resolution:
0.15mm Infill:
20% -
Fidget Spinner with M8 nuts 3D Print Model
I was asked by my young neighbor to make a spinner.
I designed this one to be a little smaller and use M8 nuts to better fit in small hands.
Standard 608 series bearing is used (inner di 8 mm, outer di 22 mm, width 7mm).
Fell free to change something if required or add a customized text to the holding pieces I added also Fusion 360 files. -
Gear/Flower Spinner 3D Print Model
This is just a little spinner I designed. I think the tolerance I used is a little much So I advise scaling this down very slightly. enjoy!
-
Gear Bearing Fidget Spinner 3D Print Model
Summary
I was able to combine the two designs in the remix to create a fully-printable geared fidget spinner. Just add bearings for weights.
Post-Printing
It will take some work to break the gears free, but take your time and it should work fine. If not, make sure your extrusion % setting is correct. -
Ornamental fidget spinner 3D Print Model
Summary
Fidget spinner created with VECTARY – free, online 3D modeling tool: https://www.vectary.com
Feel free to customize it! https://www.vectary.com/u/adrianm/ornamental-fidget-spinner
For holes use 608 bearings -
Printable Fidget Spinner 3D Print Model
Summary
A custom fidget spinner using the 608ZZ bearing. Holes in the lobes are designed to hold quarters. Designed for RepRap printers with heated build plates. Print out the spinner frame twice and glue it together. See picture for example.
Print Settings
Rafts:
No Supports:
No -
Aber EDC Spinner 3D Model
‘Aber EDC Spinner’ is a high & accurate model to add more details and realism to your projects. Detailed enough for close-up renders. *********************************Features:- Model resolutions are optimized for polygon efficiency(in 3DS MAX the meshsmooth function can be used to increase mesh resolution if necessary).- All colors can be easily modified. – No part-name confusion when importing several models into a scene. – No cleaning up necessary, just drop model into your scene and start rendering.- No special plugin needed to open scene.- HDRI background i used is not included*********************************File formats:- Max- 3DS (Multi Format)- FBX (Multi Format)- OBJ (Multi Format)- Cinema 4D R17************************************Hope you like it! Also check out my other models, just click on my user name to see complete gallery.Infos about my work:I work always my files with a lot of attention to details, good topology and optimizes polygons, I also bring a serious touch in the provided textures.I would like to thank every guys who bought my files, you motivate me to produce some more very nice 3d models.Newlc – 2017
-
Spinner Flyer 3D Print Model
My son asked me to print a circular spinner but I did not find any good to print, so hop a shot of Fusion360 and it is fixed.
-
3D Spinner Trinity Tri Wing 3D Model
‘Spinner Trinity Tri Wing’ is a high & accurate model to add more details and realism to your projects. Detailed enough for close-up renders. *********************************Features:- Separated in 2 objects- Model resolutions are optimized for polygon efficiency(in 3DS MAX the meshsmooth function can be used to increase mesh resolution if necessary).- All colors can be easily modified. – No part-name confusion when importing several models into a scene. – No cleaning up necessary, just drop model into your scene and start rendering.- No special plugin needed to open scene.- HDRI background i used is not included*********************************File formats:- Max- FBX (Multi Format)- OBJ (Multi Format)- Cinema 4D R17************************************Texture:-1 JPEG bump map (4096*4096)Available in ‘Accompanying Product Files’ section**************************************Hope you like it! Also check out my other models, just click on my user name to see complete gallery.Infos about my work:I work always my files with a lot of attention to details, good topology and optimizes polygons, I also bring a serious touch in the provided textures.I would like to thank every guys who bought my files, you motivate me to produce some more very nice 3d models.Newlc – 2017
-
3D model Spinner Captain AMERICA 3D Model
‘Spinner Captain AMERICA’ is a high & accurate model to add more details and realism to your projects. Detailed enough for close-up renders. *********************************Features:- Model resolutions are optimized for polygon efficiency(in 3DS MAX the meshsmooth function can be used to increase mesh resolution if necessary).- All colors can be easily modified. – No part-name confusion when importing several models into a scene. – No cleaning up necessary, just drop model into your scene and start rendering.- No special plugin needed to open scene.- HDRI background i used is not included*********************************File formats:- Max- FBX (Multi Format)- OBJ (Multi Format)- Cinema 4D R17************************************Texture:-1 JPEG UV map (2048*2048)Available in ‘Accompanying Product Files’ section**************************************Hope you like it! Also check out my other models, just click on my user name to see complete gallery.Infos about my work:I work always my files with a lot of attention to details, good topology and optimizes polygons, I also bring a serious touch in the provided textures.I would like to thank every guys who bought my files, you motivate me to produce some more very nice 3d models.Newlc – 2017
-
Spinner Shuriken 3D Model
‘Hand Spinner Wheel Wagon’ is a high & accurate model to add more details and realism to your projects. Detailed enough for close-up renders. *********************************Features:- Separated in 3 objects- Model resolutions are optimized for polygon efficiency(in 3DS MAX the meshsmooth function can be used to increase mesh resolution if necessary).- All colors can be easily modified. – No part-name confusion when importing several models into a scene. – No cleaning up necessary, just drop model into your scene.- No special plugin needed to open scene.- HDRI background i used is not included- Not textured *********************************File formats:- Max- FBX (Multi Format)- OBJ (Multi Format)- Cinema 4D R17************************************Hope you like it! Also check out my other models, just click on my user name to see complete gallery.Infos about my work:I work always my files with a lot of attention to details, good topology and optimizes polygons, I also bring a serious touch in the provided textures.I would like to thank every guys who bought my files, you motivate me to produce some more very nice 3d models.Newlc – 2017
-
Customizable fidget spinner with text and perfect storage box 3D Print Model
I never found a fidget spinner model that could support all kinds of combinations of ball bearings and hex nuts. I have lots of different ball bearings and wanted a spinner model that could be adjusted and that would allow for a wide range of combinations. Regarding both the amount of weights, the type of weight, the size of the ball bearings and the weights etc.
-
Timi Tree Spinner 3D Model
Timi Tree Fidget Spinner.Cinema 4D file format.All materials and HDRI file included.Thank you for your visit!
-
Spinner 3D Model
The simple model of spinner! 2 364 polys and all parts is ready for MeshSmooth x2 (36 864)! *.max *.3ds *.obj *.fbx
-
Hex Tile Fidget Spinner 3D Print Model
Interchangeable hex tile fidget spinner.
When your spinner grows too big, use the “grip”. -
Zinc Fidget Spinner 3D Model
This is a model of a Zinc Fidget SpinnerOriginally created with 3ds Max 2015|| USAGE ||This model is suitable for use in [broadcast, high-res film closeups, advertising, design visualization, forensic presentation, etc.]This model is an accurate representation of Fidget Spinner using a scale of 1 unit = 1 centimeter|| SPECS ||This model contains 2 separate objectsThis model contains 4732 polygons with Subdivision OFF This model contains 75714 polygons with 2 level SubdivisionIncludes V-ray material|| PRESENTATION IMAGES ||Preview Images are rendered using V-ray 3.00.08.This file includes information on lighting placement, exposure control and render settings.|| TEXTURES ||No textures|| GENERAL ||Model is built to real-world scaleUnits used: Centimeters. Model is [7] centimeters tall.Scene objects are organized by layers / groups.FBX, OBJ format only contain geometry data without subdivision.
