Tag: fatshark

Summary
Remixed from LaForge V2 Fatshark Doors by musicsurf, to fit the Quanum hb5808 diversity.
Make shure to check the pictures for printing orientation.
The snapping hooks are modified, as the original design would not fit my goggles to well (at least with my printer). You will definatly have to trim them with a knife to make them fit (expecially the inner ones of the right door), as they are intenionally to large, in order to acomplish a good fit after trimming.
Loosening the screws on the bottom for the goggles will make installing the doors much easyer and prevent the hooks from breaking.
To controll the module, I dismantled some long tactile pushbuttons and very carefully(!!!!!) gued the pins to the module buttons with some CA glue. (read the disclaimer before you do this!)
The additional hole in the right door can be threaded for a m3 bolt to create an optional mountingpoint for antennas.
I used some double-sided foamtape to mount the right module into the door.
disclaimer:
You do this modification at your own risk. I won’t be held responsible for
what I have written here. This is what I did and it worked for me but, it
may not work for you.
Print Settings
Printer:
Turnigy Fabrikator Rafts:
Yes Supports:
Yes Resolution:
0.1