This is universal snail Fan duct with spherical ball and socket joint. Print one of the housings with one, two or three holes.Printing detailsFilament: Pet-GSpherical ball and socket joint:Nozzle diameter 0.6 mmLayer height 0.1 mmSpiral Vase Mode !Housing:Nozzle diameter 0.6 or 0.4 mmLayer height 0.1 or 0.2
Tag: Fanduct
-
The Scorpio: Dual Blower Fanduct + SG90 Servo for Tevo Tarantula 3D Print Model
Summary
This is a remix marrying two beautiful and functional designs into one: https://www.thingiverse.com/thing:1850163 (Dual Blower fan duct) and this wonderful servo bracket https://www.thingiverse.com/thing:930292.
Printing is difficult, and the design might change in future to try and make it easier to print. Best is to use custom supports, and if you have good adhesion print it upside down. If you don’t have custom supports, print it lying on the ‘box’ and with supports from build plate. You will likely have a lot of cleaning up to do, as there is a lot of bridging.
main body can be printed at 0.2, medium infil. The arm and gear should be printed at around 0.1, no brim, solid.