Summary
This is a duel mosfet mount for a am8 frame. Do to the the size of cheap eBay mosfet you might have to drill the holes out very little. This will work with any 2040 Frame printer.
Tag: Extrusion
-
AM8 Duel Mosfets Mount (Or other 2040 Extrusion Frame 3D printers) 3D Print Model
-
Prusa MK3 3030 Extrusion Mounted Pi Camera 3D Print Model
Summary
I liked the ball joint flexibility of MoonDoggy’s pi cam design but didn’t want to attach it to the x-axis. So I modded jltx’s hard feet design to attach a ball joint and modded the original camera case to allow the cable to come out from the bottom.
To install first attach the base and bit to the extrusion securely as indicated on the hard feet design. This can be anywhere you like on the printer extrusions. Next insert the ball link into the base and twist it slightly, it should be a tight fit as I had to use pliers. The rest is the same instructions as the cam design. You can use the original camera back on the new camera front. I hid the cam ribbon cable under the printer for tidiness. -
2020 Extrusion Filament Spool Holder 3D Print Model
Summary
Wanted an easy to print, beefy, spool holder for my Folgertech FT-5. This is it. Should work with any 2020 extrusion. -
1515 extrusion cap/foot 3D Print Model
Summary
Protective cap/foot for 1515 extrusion.
Needs a 6mm M3 bolt and nut to secure it in place. -
Aluminatus Extrusion End Covers 20mm x 60mm 3D Print Model
Summary
Removed the lines and made it smooth on the outside.
Printed in ABS
.2 Layer height -
Kossel Clear OctoPrint Pi camera case mount for 2020 extrusion 3D Print Model
Summary
This is a Kossel Clear OctoPrint Pi camera case mount for 2020 extrusion.
Print Settings
Printer:
HE3D K200 Rafts:
Doesn’t Matter Supports:
No Resolution:
0.3 Infill:
15% -
2028 Aluminum Extrusion Brace 3D Print Model
Summary
Trying to print a few braces for the 2020 extrusion, if anyone has some extrusions laying around can you see if this works or what is need to make it work?
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
Doesn’t Matter Resolution:
.20 Infill:
50 -
Double GoPro/Action Cam Mount with Light bar for 2020 Extrusion 3D Print Model
Summary
I made this because I had an extra action cam doing nothing, so I made it to fit my Tevo Tarantula for Octoprint. Ii made it with 2 mounts so I could mount something else to it as well. I made an LED strip light bar to mount to a camera mount.
It is a 45 degree angle away from the extrusion. There is a hole in the light bar to help wrangle the wires, and give it a neater appearance. Look at the picture of the light strip I am using. I did give it 9mm inside width to accommodate differences in brands. These are the ones yo can cut to different lengths. If I can find a link, I will update.
Print Settings
Printer:
Creality CR-7 Rafts:
No Supports:
Yes Resolution:
.2 or .15 Infill:
20-40 Notes:
This is by no means the best settings. This is just what I printed it in. -
MGN12 Guide Tool for 2040 Extrusion 3D Print Model
Summary
This is an Alignment tool that will place your MGN12 rail over a 2040 extrusion aligned, ready to be bolted down.
Use 2-3 of these to line up your rail.
Print Settings
Printer:
TEVO Black Widow Rafts:
No Supports:
No Resolution:
0.2 Infill:
10-20% Notes:
Settings don’t really matter as long as your printer produces good dimensional accuracy. -
Tap Alignment Tool (20×20 extrusion) 3D Print Model
Summary
Basics
A printed 3D tool to aid in aligning 20×20 extrusion for tapping and drilling. Basically to help with assembly of printer frame made with 20x20mm extrusion such as the HyperCube or my ongoing design Cubeish! ..
How it works
Slide the tool onto one side of the 20×20, then use the top hole for aligning the tap bit for tapping the ends of the 20×20, or use one of the three M5 holes in the side to assist in fixing one 20×20 to another…
Note: I haven’t printer one yet but will do so and modify design if necessary…
Mike -
Foot for V-Groove Aluminum Extrusion 3D Print Model
Summary
I made this so that I could have little footies on my 2020 aluminum extrusions I bought from Inventables -
Micro SD to SD extension adapter for 2020 extrusion 3D Print Model
Summary
This is a redesign of https://www.thingiverse.com/thing:1802502 adapted for 2020 extrusions.
Needs 1 M5 x 10 button head socket head cap screw and a hammer nut or a Square if you are assembling your AM8 (Anet Metal A8) -
Trigorilla MOSFET mount for 2020 extrusion 3D Print Model
Summary
I made this to mount a Trigorilla MOSFET on my reworked Folgertech i3. Should be suitable for any 2020 extrusion. -
SC8UU mount for 2020 extrusion 3D Print Model
Summary
I’ve built a larger than usual i3 style printer, and made the y carriage from leftover 2020 extrusions from the old smaller frame.
This part mounts SC8UU bearings to the bottom of said 2020. The fit is pretty loose to avoid distorting a Drylin bearing. Carefully tightening with an M3 screw / nylock will secure them well. -
10mm Extrusion Calibrtion Cube 3D Print Model
Summary
These thing files are simple tests for calibrating the extrusion rate for your filaments.
Numerous guides online will walk you through this test too. This is often linked: https://www.youtube.com/watch?v=cnjE5udkNEA
Print with no top or bottom fills, and 0% infill, so it’s only the hollow cube.
Print at a layer height equal or smaller than your nozzle. Ideally, set your extrusion width to the same size.
A longer cube is included (technically a rectangular prism) that can be helpful for some printers, or for calibrating temperature.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
No -
2040 Extrusion Leg 3D Print Model
Summary
There are two files the first is a pair of legs that will work well on 20x40mm extrusion with a length from the bottom of the extrusion of 40mm. If you don’t want to print sets or two (left and right) just print the Universal leg which can be reversed and used on any corner.