3DHunt.co

Tag: esc

  • esc cover with rx antenna tube 3D Print Model

    esc cover with rx antenna tube 3D Print Model

    Summary
    Imported existing esc cover into fusion 360, converted to a BRep and added an antennna tube for my rx antennas.
    Fusion 360 source at: https://a360.co/2HUtSfT
    Orient the stl in your slicer to position the antenna tube at a 45 degree angle to the horizontal, and print with supports in TPU. Use mirror in your slicer to print for the arm on the opposite side.

  • Viper X210 FPV Quadcopter Frame with bigger esc slits 3D Print Model

    Viper X210 FPV Quadcopter Frame with bigger esc slits 3D Print Model

    Summary
    basically this is the same frame but i made room for bigger escs as in the original frame my escs would be clipped by the props. i’ve deppend the slits where the escs go witch makes the frame even more fragile if you print in pla.
    Print Settings
    Rafts:
    Doesn’t Matter
    Supports:
    Doesn’t Matter
    Notes:
    i recommend you stick to the settings of original Viper X210, and also avoid pla as i have now shattered my frame on one of the support arms.
    How I Designed This
    3d builder
    i used windows 10’s 3d builder and subtracted out the slots for my escs.

  • Castle Sidewinder 4 ESC cage 3D Print Model

    Castle Sidewinder 4 ESC cage 3D Print Model

    Summary
    Inspired By RPM`s previous ESC Cages i have made one of my own. The cage consists of two parts, top and bottom. and held together by two m3 Screws. the design allows for quick removal of the stock cooling fan and makes use of the flat surface.
    There is no position for mounting the switch as of yet. one is planned
    Print Settings
    Printer Brand:
    Robo 3D
    Printer:
    R1 ABS + PLA Model
    Rafts:
    No
    Supports:
    Yes
    Resolution:
    .2
    Infill:
    100

  • Drone ESC Pads 3D Print Model

    Drone ESC Pads 3D Print Model

    Summary
    ESC base pads

  • Facile à imprimer maquette avion jet T33 esc: 1/64 3D Print Model

    Facile à imprimer maquette avion jet T33 esc: 1/64 3D Print Model

    Facile à imprimer maquette avion jet T33 esc: 1/64

  • Woop 105mm Indestructible TPU 1103 7800kv 3S 3D Print Model

    Woop 105mm Indestructible TPU 1103 7800kv 3S 3D Print Model

    Here is a mini quad turbine in TPU with 1103 brushless motors that accepts the 3S with the propellers 4 blades and 2S with the 5 blades.
    The chassis and the lipo door are in TPU Ultimaker and the top plate in Polycarbonate or ABS to rigidify the whole.
    It takes 20% filling for the frame with 230 ° on a carpet at 70 ° at a speed of 30mm / s.