Model dimensions:- length – 2920 mm- width – 1400 mm- height – 1388 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:http://tireburn.com/2018/02/01/insane-fiat-126p/https://www.youtube.com/watch?v=fV7rzFBeUlQ
Tag: dragster
-
Rear wheel of old school dragster 3D Model
Model dimensions:- diameter – 730 mm- width – 258 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.
-
Gasser Pontiac Chieftain 3D Model
A gasser is a type of hot rod originating on the dragstrips of the United States in the late 1950s and continued until the early 1970s.Gassers are based on closed body production models from the 1930s to mid-1960s, which have been stripped of extraneous weight and jacked up using a beam axle or tubular axle to provide better weight distribution on acceleration, though a raised stock front suspension is common as well.The Pontiac Chieftain is an automobile which was produced by Pontiac from 1949 to 1958.Model dimensions:- length – 5639 mm- width – 1985 mm- height – 1763 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:https://en.wikipedia.org/wiki/Gasser_(car)https://www.youtube.com/watch?v=uCGd5-y8e34https://www.youtube.com/watch?v=kmi3vXya7Rshttps://www.youtube.com/watch?v=Qiye02Om5_Uhttps://www.youtube.com/watch?v=4bm_cCbWnpQ
-
Ape car dragster 3D Model
Modified Ape car for DragModel dimensions:- length – 3408 mm- width – 1634 mm- height – 1429 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.
-
Front engine jet dragster 3D Model
Model dimensions:- length – 7370 mm- width – 1810 mm- height – 1250 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.
-
Twin-engined dragster 3D Model
Model dimensions:- length – 5870 mm- width – 1782 mm- height – 1250 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:https://www.youtube.com/watch?v=MA0LKTdKNtwhttps://www.youtube.com/watch?v=GSNy3uwoBSUhttps://www.youtube.com/watch?v=UA2lkUItVs8https://en.wikipedia.org/wiki/Dragster_(car)
-
Twin-engined pulling tractor 2 3D Model
Truck and Tractor pulling, also known as power pulling, is a motorsport competition, popular in United States, Europe (especially in the Netherlands, Denmark and Germany), Australiaand Brazil, and New Zealand which requires modified tractors to pull a heavy sled along a 35 foot wide, 330 foot long track, with the winner being the tractor that pulls the sled the farthest. The sport is known as the world’s most powerful motorsport, due to the multi-engined modified tractor pullers.All tractors in their respective classes pull a set weight in the sled. When a tractor gets to the end of the 100 metre track, this is known as a “full pull”. When more than one tractor completes the course, more weight is added to the sled, and those competitors that moved past 300 feet will compete in a pull-off; the winner is the one who can pull the sled the furthest.The sled is known as a weight transfer sled. This means that as it is pulled down the track, the weight is transferred (linked with gears to the sled’s wheels) from over the rear axles and towards the front of the sled. In front of the rear wheels, there is a “pan”. This is essentially a metal plate and as the weight moves over this the resistance builds. The further the tractor pulls the sled, the more difficult it gets.The most powerful tractors, such as those in the 4.5 modified class in Europe, can produce over 10,000 horsepower.Model dimensions:- length – 5207 mm- width – 2814 mm- height – 2035 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:https://en.wikipedia.org/wiki/Tractor_pullinghttps://www.youtube.com/watch?v=ZHqoNiQ2e10https://www.youtube.com/watch?v=J1aTCZ8NPhQhttps://www.youtube.com/watch?v=bFzd5Wl3Bxk
-
Front wheel from Dirt dragster 3D Model
Model dimensions:- diameter – 800 mm- width – 226 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.
-
Dirt dragster 3D Model
Model dimensions:- length – 4396 mm- width – 2417 mm- height – 2539 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.
-
Wheel for mud drag racing 3D Model
Model dimensions:- diameter – 1000 mm- width – 480 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.
-
Offroad wheel 20 3D Model
Model dimensions:- diameter – 1564 mm- width – 300 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.
-
Offroad wheel 19 3D Model
Model dimensions:- diameter – 940 mm- width – 400 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.
-
Rear wheel from Top fuel dragster 3D Model
Model dimensions:- diameter – 915 mm- width – 480 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.
-
Top Fuel Dragster 3D Model
car racing USA american top fuel drag dragster sport automobile detailed v8 engine nitromethane methanol gasoline exaggerated NHRA straight-line accel
-
Rear wheel of dragster Free 3D Model
Diameter – 915 mmWidth – 480 mmYou can use them for your 3d models.Designed in Solid Works 2012.Rendered in Keyshot 5.0.
-
Front wire wheel from dragster 3D Model
Model dimensions:- diameter – 600 mm- width – 112 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.
-
Front wheel from dragster 3D Model
Model dimensions:- diameter – 640 mm- width – 94 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.
-
Pulling tractor with radial engine 3D Model
Truck and Tractor pulling, also known as power pulling, is a motorsport competition, popular in United States, Europe (especially in the Netherlands, Denmark and Germany), Australiaand Brazil, and New Zealand which requires modified tractors to pull a heavy sled along a 35 foot wide, 330 foot long track, with the winner being the tractor that pulls the sled the farthest. The sport is known as the world’s most powerful motorsport, due to the multi-engined modified tractor pullers.All tractors in their respective classes pull a set weight in the sled. When a tractor gets to the end of the 100 metre track, this is known as a “full pull”. When more than one tractor completes the course, more weight is added to the sled, and those competitors that moved past 300 feet will compete in a pull-off; the winner is the one who can pull the sled the furthest.The sled is known as a weight transfer sled. This means that as it is pulled down the track, the weight is transferred (linked with gears to the sled’s wheels) from over the rear axles and towards the front of the sled. In front of the rear wheels, there is a “pan”. This is essentially a metal plate and as the weight moves over this the resistance builds. The further the tractor pulls the sled, the more difficult it gets.The most powerful tractors, such as those in the 4.5 modified class in Europe, can produce over 10,000 horsepower.Model dimensions:- length – 5207 mm- width – 2300 mm- height – 2035 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:https://en.wikipedia.org/wiki/Tractor_pullinghttps://www.youtube.com/watch?v=ZHqoNiQ2e10https://www.youtube.com/watch?v=J1aTCZ8NPhQhttps://www.youtube.com/watch?v=bFzd5Wl3Bxk
-
Top fuel dragster 3D Model
Length – 8680 mmWidth – 1454 mmHeight – 2033 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.
-
Pickup Dragster 3D Model
Model dimensions:- length – 5577 mm- width – 1806 mm- height – 1947,4 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.
-
Jet pulling tractor 3D Model
Truck and Tractor pulling, also known as power pulling, is a motorsport competition, popular in United States, Europe (especially in the Netherlands, Denmark and Germany), Australiaand Brazil, and New Zealand which requires modified tractors to pull a heavy sled along a 35 foot wide, 330 foot long track, with the winner being the tractor that pulls the sled the farthest. The sport is known as the world’s most powerful motorsport, due to the multi-engined modified tractor pullers.All tractors in their respective classes pull a set weight in the sled. When a tractor gets to the end of the 100 metre track, this is known as a “full pull”. When more than one tractor completes the course, more weight is added to the sled, and those competitors that moved past 300 feet will compete in a pull-off; the winner is the one who can pull the sled the furthest.The sled is known as a weight transfer sled. This means that as it is pulled down the track, the weight is transferred (linked with gears to the sled’s wheels) from over the rear axles and towards the front of the sled. In front of the rear wheels, there is a “pan”. This is essentially a metal plate and as the weight moves over this the resistance builds. The further the tractor pulls the sled, the more difficult it gets.The most powerful tractors, such as those in the 4.5 modified class in Europe, can produce over 10,000 horsepower.Model dimensions:- length – 5207 mm- width – 2300 mm- height – 2035 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:https://en.wikipedia.org/wiki/Tractor_pullinghttps://www.youtube.com/watch?v=ZHqoNiQ2e10https://www.youtube.com/watch?v=J1aTCZ8NPhQhttps://www.youtube.com/watch?v=bFzd5Wl3Bxk
-
Jet dragster 3D Model
A jet car is a car propelled by a jet engine.A jet dragster is a jet powered car used for drag racing.They are most commonly seen at race shows.Model dimensions:- length – 7612 mm- width – 1280 mm- height – 1020 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:https://en.wikipedia.org/wiki/Jet_carhttp://americancarsamericangirls.com/show/tag/allison-west/https://www.youtube.com/watch?v=17EmKlfaHIEhttps://www.youtube.com/watch?v=GHOgZlafcQshttps://www.youtube.com/watch?v=arytuhys9T0https://www.youtube.com/watch?v=J3819OC-7wA
-
Front engine dragster 3D Model
Length – 6345 mmWidth – 1654 mmHeight – 1242 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.
-
Dragster Dodge Charger 1970 3D Model
Model dimensions:- length – 6070,5 mm- width – 1948,8 mm- height – 1283,6 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.
-
Twin-engined jet dragster 3D Model
A jet car is a car propelled by a jet engine.A jet dragster is a jet powered car used for drag racing.They are most commonly seen at race shows.This model is conceptual.Model dimensions:- length – 7434 mm- width – 1764 mm- height – 1020 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:https://en.wikipedia.org/wiki/Jet_carhttp://americancarsamericangirls.com/show/tag/allison-west/https://www.youtube.com/watch?v=17EmKlfaHIEhttps://www.youtube.com/watch?v=GHOgZlafcQshttps://www.youtube.com/watch?v=arytuhys9T0https://www.youtube.com/watch?v=J3819OC-7wA
-
Top fuel bike 3D Model
Bikes in the Top Fuel category are fueled by nitro methane and can make nearly 1,500 horsepower.From a standing start they can cover the first 60 feet in less than a second and can reach 200 mph in less than eighth-mile or 660 feet.Length – 4230 mmWidth – 700 mmHeight – 894 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.
-
Hemi Trike Rocket 2 3D Model
The Rocket II was designed and built by two of the world’s most creative artists, and its styling is as powerful as its 1,000-horse Hemi. Tim “The Frogman” Cotterill is an English sculptor who grew up loving the outdoors, animals, and motorcycles. He’s spent decades creating frog sculptures that are always in high demand—but his artistic talents extend to vehicle design as well. It was around 1989 when Tim got the inspiration to build a radical, three-wheeled, six-cylinder trike. The stocky, aptly named “Rocket” seriously disturbed the peace in his old English hometown. But he soon moved to California, and though he lost interest in that wild trike, he never forgot about it. But a few years ago, Cotterill met another artistic gearhead: Michael Leeds of Blastolene. Leeds designs and builds high-profile machines, including a stunning retro/future roadster called the Blastolene Special owned by Jay Leno. Leeds’ considerable skill clearly carried over to sheetmetal, and with Tim’s ideas and drawings in hand, they went about planning what Tim called “A custom motorbike like no other.” It would be called the Rocket II.ROCKET II Stats:Weight: 2500lbsMotor: John Arruzza – Arruzza High Performance, North Carolina16 plug, 426 Hemi 1 of only 50 cast blocks, 1000hp 871 blower0-100mph 4.5 secondsHeaders: Bassett Racing, Anaheim, CA (Speedboat headers)Transmission: 3 speed TorquefliteBody: Randy Grubb, OregonElectrical: Dave Nelson MSD ignitionWheelbase: 12ftWheels: Front wheel is homage to Bonneville Salt FlatsFront rim made out of a block of aluminum 18×26 – 50lb rim inspired by the ViperTomahawk 2 front tires – 24in MetzlerBack axle: Kugel Komponents – La Habra, CA20 inch rims on backMickey Thompson tires 18×319” inboard brake pistonsCustom speedometer: Classic InstrumentsBack lights: ’59 CadillacModel dimensions:- length – 4132 mm- width – 1975 mm- height – 1135 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:http://www.bikernettrikes.com/pages/frogmans_1000hp_trike_riding_the_rocket_ii.aspxhttp://www.inautonews.com/frogman-rocket-ii-trike-by-tim-cotterillhttp://blastoland.com/blastoland/FROG_HEMI_TRIKE.htmlhttp://torqueandtread.com/motorcycles/the-one-and-only-hemi-v8-powered-rocket-ii-1200hp-trike-motorcycle/http://www.1000ps.de/modellnews-2353585-hemi-trike-rocket-iihttps://www.youtube.com/watch?v=su7gNQf8gK8https://www.youtube.com/watch?v=oeNLMN_RqSIhttps://www.youtube.com/watch?v=MRreA3K-7YY
-
3D NHRA DHL Funny Car Dragster (lowpoly) 3D Model
NHRA DHL Funny Car DragsterGame-ready and has already been featured as an exclusive HQ mod in Rigs of Rods. This model is highly optimized for gaming featuring a clean lowpoly exterior, engine model, and a basic interior/underbody for maximum gaming performance. This model could be used for both modern-day and older gaming. Model includes:- Lowpoly UV mapped exterior- Detailed lowpoly engine model- Highly optimized poly-count to fit most gaming needs- Under-body panels for part removal- HQ textures
-
Engine Cover 3D Model
High detailed 3d model of engine cover.The model was modeled in 3ds max.Two .max files with V-Ray and Standard 3ds Max materials.Previews rendered with V-Ray.Many other 3d engine parts available in this series, search for GANDOZA
-
Engine Cover 3D Model
High detailed 3d model of engine cover.The model was modeled in 3ds max.Two .max files with V-Ray and Standard 3ds Max materials.Previews rendered with V-Ray.Many other 3d engine parts available in this series, search for GANDOZA
-
Engine Cover 3D Model
High detailed 3d model of engine cover.The model was modeled in 3ds max.Two .max files with V-Ray and Standard 3ds Max materials.Previews rendered with V-Ray.Many other 3d engine parts available in this series, search for GANDOZA
-
Corvette Engine Cover 3D Model
High detailed 3d model of Chevrolet Corvette engine cover.The model was modeled in 3ds max.Two .max files with V-Ray and Standard 3ds Max materials.Previews rendered with V-Ray.Many other 3d engine parts available in this series, search for GANDOZA
-
Engine Cover 3D Model
High detailed 3d model of engine cover.The model was modeled in 3ds max.Two .max files with V-Ray and Standard 3ds Max materials.Previews rendered with V-Ray.Many other 3d engine parts available in this series, search for GANDOZA
-
Plymouth Barracuda Dragster 1974 3D Model
The 3D model was created on real car base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.
Model formats:
– *.max (3ds Max 2008 scanline)
– *.max (3ds Max 2008 vray)
– *.fbx (Multi Format)
– *.obj (Multi Format)
– *.3ds (Multi Format)
– *.mb (Maya 8.5)
– *.lwo (Lightwave 6)
– *.c4d (Cinema 4D 11)
* tire’s texture is not included in the set.
* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)
If you need any other formats we are more than happy to make them for you.
The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.
We greatly appreciate you choosing our 3D models and hope they will be of use.
We look forward to continuously dealing with you.
Sincerely Yours,
Hum3D Team
