Kitchen set includes worktop and cabinets, washer, dishwasher, electric stove and extractor hood. VRay was used for rendering.
Tag: dishwasher
-
Sponge Holder 3D Model
A useful accessory that helps to keep the kitchen sponge in good condition, since it will keep it dry avoiding the development of bacteria and fungi; it is located in a standard faucet, you can also place a soap or other things.Two STL models are attached to the file, one for the left side and one for the right side.3D printing settingsEasy to print:Support: noWall thickness: 1.6 mm or moreFilling: 20%.Layer height: 0.2 mmPlate adhesion: noPrinting speed: 60 m/sTemperature: depending on material
-
Bosch DishWasher 3D Model
Highly detailed Bosch Dishwasher SMS68TI02E 3D model#Maya ma, obj, fbx, cinema 4d, and Max files included.#Maya 2016 ma lit scene with materials#textures included#cutlery includedThanks
-
Miele G 4203 SC Active Dishwasher 3D Model
Miele G 4203 SC Active Dishwasher 3d model3dsMax2010; Fbx; Obj
-
Dishwasher Arcelik 3D Model
Modelled : AutocadRendered : 3ds Max 2013 – Vray 2.3059.8×54.8x (h) 82 cm.59.3×5.2x (h) 73.5 cm.Files : .max (2010, 2011, 2012, 2013).fbx.obj.mtland textures(c) 3D_SB 2011-2014
-
Dishwasher Lower Basket Wheel – AEG Electrolux 3D Print Model
Summary
This is a replacement wheel for the “AEG Electrolux FAVORIT” dishwasher “44760”, but it should fit other models as well.
On thingiverse, there were models of the wheels for the lower basket, but not the upper one.
I didn’t print it yet, because I can’t print ABS at the moment and I don’t think PLA is suitable in that environment, but it should work perfectly.
If you find any errors, please tell me, I will edit the model asap.
How I Designed This
I designed this using onshape.
I measured everything with a caliper off of an old original wheel.
Here’s the link, feel free to copy and modify it:https://goo.gl/z4amYW -
Dishwasher Lower Basket Wheel 3D Print Model
Summary
I got tired of reprinting Dishwasher Lower Basket Wheel holder by Rukey all over again every couple of months, because they broke like the originals, so I redesigned the wheel holder to also include the wheel. This new design should probably have all parts thick enough not to break over time.
Fits our AEG Electrolux, should probably fit Zanussi.
Print Settings
Printer:
Minifactory 3 dual Rafts:
No Supports:
No Resolution:
0.2mm Infill:
50% Notes:
Print it from something that can withstand the heat (up to 75°C in our Electrolux) I used ABS.
Place the outer ring of the wheel so the inner ring is inside it and print it all wheel down. I use Repetier-Host, so I imported both files, set them to the same group, centered and rotated around X-axis 180°.
Post-PrintingPry the print off the print bed, then turn the wheel (outer ring) by hand. The wheel should snap loose and turn freely.
If the axle doesn’t fit, drive a 5.5mm drill bit through the hole.
How I Designed This
I used the Dishwasher Lower Basket Wheel holder as a base for the holder and then just added the wheel at the end.
The freecad file is included in files. -
3D Kitchen Appliances
These are a standard set of modern kitchen appliances. All models are set to real world scale and standard kitchen appliance sizes. These models where purposely designed for interior design rendering. All the detail on these models are in the visible areas as a normal kitchen setting. The backs and sides are very low poly were no detail is needed. The dishwasher can be easily scaled to any size. All models are on one DDS texture. All textures included are 2048×2048. spectral, Reflection and Transparency maps are included. Other maps are included for different colors, dare to go red in your next design?Polygons: 18376Vertices: 13276Stove:Polygons: 12626Vertices: 9874Height: 47Width: 30Depth: 25.5Refrigerator:Polygons: 6110Vertices: 3402Height: 69Width: 30Depth: 34Dishwasher:Polygons: 3382Vertices: 1910Height: 35Width: 18Depth: 25.5Microwave:Polygons: 2594Vertices: 1486Height: 16.5Width: 30Depth: 15Hood:Polygons: 1148Vertices: 696Height: 7Width: 30Depth: 20
