3DHunt.co

Tag: dampener

  • Delta arm dampener 56mm pitch 3D Print Model

    Delta arm dampener 56mm pitch 3D Print Model

    Summary
    This dampener is what I use as the rods I use have 56mm pitch (center to center distance on the rods) and 7mm diameter.
    Others I found were much too short. I have made sure the model is sliced correctly on S3D as well as Cura etc. I have also reinforced the center arc sides a little as that seems to be where the stress can cause failures on dampeners. Also made the snapping on and off easier by rounding the inner edges of the rod grips.
    I advise using PETG or ABS as PLA just isn’t great for this type of attachment.
    Print Settings
    Printer:
    Anycubic Kossel
    Rafts:
    No
    Supports:
    No
    Resolution:
    0.1 – 0.2 (I prefer 0.15)
    Infill:
    100%

  • Flexible motor dampener collection 3D Print Model

    Flexible motor dampener collection 3D Print Model

    Summary
    Shock absorber to reduce Motor vibration. Must be printed on TPU or TPE
    Included Designs*:
    · 11xx
    · 13xx
    · 18xx
    · 22xx
    · 23xx
    · 28xx
    · 31xx
    · 35xx
    · 40xx
    · 41xx
    *These are general designs for most brands and models. It is possible that with some mark does not coincide exactly the measures
    By AIRK – http://www.airk.eu