3DHunt.co

Tag: D7

  • Wanhao Duplicator 7 (D7) mask test 3D Print Model

    Wanhao Duplicator 7 (D7) mask test 3D Print Model

    Summary
    This is the test files to create digital MASK for Wanhao Duplicator 7. For more info you may follow to http://3dtoday.ru

  • Logan old Man prepared for D7 3D Print Model

    Logan old Man prepared for D7 3D Print Model

    Summary
    prepared an free available STL for printing with Wanhao D7
    unfortunately I lost the origin

  • KTInga Battlecruiser 3D Model

    KTInga Battlecruiser 3D Model

    startrek star trek D7 battle cruiser enterprise klingon kirk picard united federation planets space scifi sf ktinga bird of prey romulan borg vulcan

  • Fokker D7 Triplane 3D Model

    Fokker D7 Triplane 3D Model

    Airplane plane aircraft military fighter dogfighter triplane Fokker D7 Driedecker Von Richtoven Udet Germany Austria WWI World War 1

  • Wanhao d7 new limit switch 3D print model 3D Print Model

    Wanhao d7 new limit switch 3D print model 3D Print Model

    Summary
    Wanhao d7 new limit switch 3D print model.
    I have created this mount to install a mechanical end stroke instead of the optical one.
    https://www.cgtrader.com/3d-print-models/hobby-diy/mechanical-parts/wanhao-d7-new-limit-switch

  • Better IncrediVat D7 3D Print Model

    Better IncrediVat D7 3D Print Model

    Summary
    Wanhao Duplicator 7 VAT Standard and XL.
    Standard design is a rip off from the official VAT.
    Enhanced version is reworked as: Slopped edge, pouring slope, increased capacity.
    330ml – Standard.
    350ml – Enhanced.
    400ml – Standard.
    420ml – Enhanced.
    You will need the following hardware:
    22x M4x12 Metal spacer.
    22x M4x10 Countersunk screws.
    This is not litterally a remix but since mister Z use big word and think he own the design right on FlexVAT or any VAT that exist, here it is.
    This is NOT from his design but to please him, I’ll act like it is. =)
    The original model posted here is under license CC BY-NC 3.0 which allow me to:
    Share — copy and redistribute the material in any medium or format
    Adapt — remix, transform, and build upon the material
    And “The licensor cannot revoke these freedoms as long as you follow the license terms.”
    According to https://creativecommons.org/licenses/by-nc/3.0/
    Print Settings
    Printer:
    Bertha Rafts:
    No Supports:
    Doesn’t Matter Resolution:
    0.2mm Infill:
    15 Notes:
    Print 1 version of your liking and 1 seal.
    Post-Printing
    The metal spacer is tight fit but use glue/epoxy then push them in place.

  • Additional Z-Axis Stabilizer for Wanhao D7 3D Print Model

    Additional Z-Axis Stabilizer for Wanhao D7 3D Print Model

    Summary
    Adds another stabilizing rod to the z-axis on the Wanhao D7. Work in progress. Alignment is not perfect and required a little torch action on base piece to soften PLA to fit!