3D model of metro bogie with coupler.
Tag: Coupler
-
Ruger 10/22 10rd magazine coupler 3D Print Model
Summary
Simple jig which centers the magazines. Use hot glue to weld them together for a non-permanent tack. really for the US states which limit no more than 10 rounds. -
Flexible Shaft Coupler 5mm to 8mm 3D Print Model
Summary
Flexible Shaft Coupler – for 5mm Shaft with flat to 8mm Shaft. Print the coupler end pieces from PLA or ABS, the flexible insert with NinjaFlex/TPU, etc. Designed for 4mm screws and nuts to clamp to the shafts.
Print Settings
Rafts:
Doesn’t Matter Supports:
No Resolution:
0.2mm Infill:
40-80% for shaft clamps, 35% for flexible insert -
Coupler Adapter Ring 3D Print Model
Summary
I was connecting some odd sized PVC and needed an adapter on one end of the 3/4″ coupler, so I did what every 3Der would do… I made one. It is less than 3/4″ OD by about 1 mm but that was by design so it worked for what I was doing today.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator+ Rafts:
Yes Supports:
No Resolution:
200 microns
