Tag: constructor

  • Lego robot LHB-ZT-003 ONTAKE 3D Model

    Lego robot LHB-ZT-003 ONTAKE 3D Model

    model created in sketchuprender KeyShotedges 961253faces 465019component instances 606grups 642component definitions 106layers 1materials 10

  • Morrow project Overland train Mark II 3D Model

    Morrow project Overland train Mark II 3D Model

    In the 1950s the LeTourneau company developed several overland trains, essentially oversized semi-trailer trucks that could travel over almost any terrain. Their intention was to be able to handle logistics needs without being dependent on local road or rail systems, allowing them to operate in back-country areas. The US Army had three experimental units built, the largest reaching almost 600 feet (183 m) long, which holds the record for the longest offroad vehicle. Road trains are in use in certain roles today, but the US Army examples and a few derivatives appear to be the only offroad examples built.LCC-1 was so successful that in 1958 the Army contracted for a larger version, the TC-497 Overland Train Mark II. Generally similar to the LCC-1 in concept, the Mark II included a number of features to allow the train to grow to any length.The Mark II had a much larger six-wheeled cab that was over 30 feet (9.1 m) tall and was no longer articulated due to the ability for all the wheels to be steered. The turbine engine was much smaller than the diesel it replaced, allowing the interior to support a crew of six with sleeping quarters, toilets and a galley. It was even equipped with a radar. An additional two power cars and ten cargo cars were built for testing. In total the train now stretched over 570 feet (170 m). On flat ground it could carry 150 tons of cargo at about 20 mph. Range at full load was normally 350 to 400 miles (560 to 640 km), but additional fuel trailers could be added to extend it.[8]Final specifications were completed in 1960, and construction took most of 1961. After preliminary testing, it was handed to the Army in February 1962, and shipped to the Yuma Proving Ground in Yuma, Arizona. In testing under the “Project OTTER”, for “Overland Train Terrain Evaluation Research”, the vehicle performed well. But in the end the Army gave up on the idea as newer heavy-lift helicopters like the S-64 Skycrane made the train concept outdated.The vehicle remained unused for a time, and was then put up for sale for $1.4 million in 1969. All that remains of the Mark II is the control cab which remains at Yuma, the rest was sold off to a local scrap dealer. The Mark II retains the record for the longest offroad vehicle in the world.Control car model dimensions:- length – 17469 mm- width – 5850 mm- height – 7568 mmEnclosed payload car model dimensions:- length – 16500 mm- width – 5850 mm- height – 3500 mmRepair module model dimensions:- length – 16500 mm- width – 5850 mm- height – 4700 mmOverall model dimensions:- length – 89115 mm- width – 5850 mm- height – 7568 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:http://asmrb.pbworks.com/w/page/53070717/Morrow%20Project%20Overland%20Trainhttps://en.wikipedia.org/wiki/Overland_trainhttp://shusharmor.livejournal.com/782432.html?thread=9462112

  • LEGOUNITEDSTATESCAPITOLBUILDING 21030 3D Model

    LEGOUNITEDSTATESCAPITOLBUILDING 21030 3D Model

    Collection’s modelThe model is one of the most impressive and symbolically important structures. Located in the city of Washington (DC, USA) the Capitol is a magnificent example of neoclassical architecture. In this carefully detailed interpretation of the Capitol building from the LEGO Architecture big emphasis on the clean white facade with columns, the famous stairs and lawns. The model includes removable dome that provides access to a carefully executed interior, depicting the famous national statuary hall with columns, statues, and tile floors.1032 items, 144х448х157 mm

  • AUSINIAssemblingmasterNO254223in1 Free 3D Model

    AUSINIAssemblingmasterNO254223in1 Free 3D Model

    Set series “Transport” manufacturer “Ausini” is a designer 3 in 1, details of which you can collect three different machines: a helicopter, boat and plane. These models will perfectly fit the interior nursery or other where the presence of the child. All three models are in one file. The render is made separately for a better overview.

  • AUSINIAssemblingmasterNO254223in1 3D Model

    AUSINIAssemblingmasterNO254223in1 3D Model

    Set series “Transport” manufacturer “Ausini” is a designer 3 in 1, details of which you can collect three different machines: a helicopter, boat and plane. These models will perfectly fit the interior nursery or other where the presence of the child. All three models are in one file. The render is made separately for a better overview.

  • Constructor gun 3D Print Model

    Constructor gun 3D Print Model

    Summary
    I create a series of prefabricated 3D printed constructors. Currently, three ready-made designers are ready. In this article I will talk about the national team gun. The purpose of the project is the development of 3D printing for educational purposes.
    The printing material is white PLA. The reason for choosing the material is simple:
    low shrinkage. And since the elements of the designer should be approached to each other without fitting, shrinkage is the most important factor.
    Excellent adhesion. Since the cannon itself is printed standing upright, a good adhesion of a small area is extremely important. However, you can still print only with the raft.
    Safe.
    The advantage of printed constructs is obvious.
    Low cost price
    you can select the desired scale
    a fascinating process of printing and assembling the designer.
    The cannon consists of eight parts. You can collect both on glue and without it. To paint details (if there is a desire) it is desirable still in the disassembled kind.
    Print Settings
    Printer:
    Picaso PRO250 Rafts:
    Yes Supports:
    No Infill:
    20%

  • Cabriolet B-740i construction kit 3D Model

    Cabriolet B-740i construction kit 3D Model

    Cabriolet B-740i 3D Wooden Puzzle. The model consists of a set of objects.Size: Length: 205 mmWidth: 120 mmHeight: 73 mmTiling textures:Face_Grain: U:2,83 V:2,0Edge_Grain: U:1,0 V:32,21What is included:max format:- Complete vray scene as on preview images. Click render and you get same result.fbx format:-Without rendering setup, cameras, lights.Other archive:-animation frames without watermarks + alpha for them (all in png format).-preview images without watermarks + alpha for them (all in png format).

  • Builder Cartoon Character

    Builder Cartoon Character

    3D Cartoon builder with ruler and trowel. Suitable for animation.Base texture for body and clothes: id, basecolor, metallic, normal, roughness. Resolution 2048×2048.50480 polygons51873 points

  • Fantazy constructor

    Fantazy constructor

    Game constructor ”Fantasy”, reconstructed toy from the 1980sReady-to-print model.To achieve the required strength print from ABS-plastic.Standard equipment:Wheel – 6 items;Plate – 6 items;Pin – 60 items;Axis – 6 items.You can print in any number and configuration, any colors.