3D модель персонажа из игры S.K.I.L.L. – Special Force 2
Tag: C
-
KSNA Class C Airspace 3D Print Model
Summary
I’ve been looking for a way to show new student pilots how the numbers on a sectional translate to actual space in the air. See the disclaimer below if you’re somehow tempted to plan a flight using a piece of 3-D printed plastic.
How I Designed This
Sketchup Fun
“Lisa” in the SketchUp community did all the heavy lifting. I parsed out John Wayne’s airspace and brought it kind of to scale.Custom Section
Only a Novelty
I don’t totally feel like this is necessary, but just in case: This is a model, is not to scale, and may not even be accurate. I tried to make it so it would sit on top of a sectional to help new students visualize the shape of the airspace only. Don’t use this for any kind of flight planning…but dear god I hope you knew that already. 😐 -
Casbah Crystal 3D Model
– Photorealistic lamp.- Executed in 3d max 2009.- All textures and materials needed for the rendering found in the archive.- Smoothing modifier is stored in the stack for convenience.-Gamma 2.2-Correction of textures and materials mood in 3d max, as well as tiling textures because of possible problems with the display of textures and materials in other programs distinct from 3d max and Vray-For all questions with regards to the model, you can contact me through the administration of the site, if you want something to fix or correct, if something does not work
-
C Battery Eliminator 3D Print Model
Summary
In the past, I’ve had some devices which required C batteries, mostly LED lights. I’d use a large dowel rod and a screw, but with 3d printing no need to get the dowel…
Using these devices for auxiliary lighting could continue to use quite a few batteries. My lamp, for example, requires 3 C batteries, at 1.5 volts each equals 4.5 volts, or close enough to use a USB 5v power supply. Even with multiple batteries, many of these devices wire the batteries in series, so you only need to make two connections, one to the positive, and one to the negative side.
To attach the wire (to both sides, I’m using an M3 12mm screw with a nut
To replace one battery print one body and two caps (one for each end). The bottom of the body I added a removable circle to assist with bonding to the build plate.
I’d recommend printing in high-quality mode, I didn’t need supports or rafts. 20% infill worked fine for me.
Print Settings
Rafts:
No Supports:
No Infill:
20 -
CN Tower 3D Model
This is a very highly detailed,realistic and fully textured model.A lot of reference materials have been used to create this model.All the materials and textures are included.V-Ray light setup and render setup is included.Modeled very closely to its real life counterpart.
-
Huawei Honor 4C Gold 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
E3D – Motorola Moto E4 Plus Grey 3D model 3D Model
This pack:Element 3D V2.2 ( All colors )models preset easy to use- 1 file OBJ High poly- 1 file OBJ standard- 1 file C4D R12 standard render- 1 file 3ds max 2012 standard material- E3D file full materials set up like previewsHow to use it?1. Open After Effects CC 2014 ( or higher) and create new composition ( You need Element3D V2.2 to use )2. Create new Solid layer and add Element effect. ( Effect/Video Copilot/ Element )3. Click Scene Setup4. Click on IMPORT inside Element3D scene setup5. Choose my .e3d preset for the model and press Open.If you dont see the model do not forget to right click on the model name and press Replace model then select the .obj model file in the respective models folder.
-
Motorola Moto E4 USA Gold 3D Model
Motorola Moto E4 USA 2017………………….FEATURES:- This model is a highquality, details enuogh to close-up render- Images preview take from V-Ray rendering and not edited- Models resolutions are optimized for polygon efficiency, apply smooth function to increase mesh resolution- All textures was strip paths, open the file and all texture will be connected automatically. – Real world scale, we offer a model with an error of less than 5%.- No object missing- Model with 3 and 4 sides only- No polygons with more than 4 sides- No object with isolated vertices, overlapping faces or overlapping verts- No poles or crease- Poly counts: 19 168- Vert counts: 19 933In 3ds max files:- Frezze tramsform to zero ( 0,0,0 )- Group: Yes- Object with Parents and Childen: Yes- Layer apply to manage: Yes- Named all object………………….FORMATS: 1. 3ds Max 2012 + Vray 2.0: Native format- Vray 2.0 ( full setup materials, lights and camera make rendering like image preivews)- Standard materials ( full setup materials: colors, reflect, translucent )2. Geometry and standard materials with textures. Amount reflect and bump are not set:- OBJ 2012- FBX 2012- 3DS 2012 3. Standard materials with textures.Amount reflect and bump are not set. – Maya 2012- C4D R12- Lightwave 11…………………..TEXTURES:- Textures highquality, enough for close-up render ( 2048 pixels )- UVWs mapping with mixed: overlapping and non-overlapping…………………..Beemaxx team:With over 3 years of experience working with 3D models. We give you all the very best in quality, save time. Our customers come from all over the world. We want to develop a strong community starts from the expanded 3d models market.- Also check out our other models, just click on our user name to see complete gallery.- Summit a product rating will help us very much.
-
Otokar Navigo C Bus 2017 3D Model
The 3d model based on a real bus, created according to the original dimensions. All model files were “smoothed”. We can provide product files with original geometry by your request.
All main parts of the model are separated objects. Therefore, you can easy change all materials. We provide several formats for each model, most of them available by default.
* images rendered with using V-Ray plugin (we don’t include lighting and environment to a set). -
Otokar Vectio C Bus 2017 3D Model
The 3d model based on a real bus, created according to the original dimensions. All model files were “smoothed”. We can provide product files with original geometry by your request.
All main parts of the model are separated objects. Therefore, you can easy change all materials. We provide several formats for each model, most of them available by default.
* images rendered with using V-Ray plugin (we don’t include lighting and environment to a set). -
3D Parmesan Cheese Wheel 3D Model
This Parmesan Cheese Wheel is a high end, photorealistic 3D model, that is created to help you add the realism to your project.The model is suitable for any visual production – broadcast, high-res film close-ups, advertising, games, design visualization, forensic presentation, etc. The model was originally created in 3Ds Max 2012, then fully textured and rendered using V-Ray. All geometry and visual aspects of the model are optimized to give you highest possible quality for up to 2k renders. There is no post-production used on any of the renders you see. Features: -This model is accurately sized to match the real object. -Objects are grouped and named according to their real purpose, allowing the model to be rigged and animated easily. -Clean and optimized topology is used for maximum polygon efficiency. -Model is fully sub-dividable to allow Turbosmooth Iterations to increase mesh smoothness if needed. -All textures and materials are tailored and applied for high quality render results. -All objects have fully unwrapped UVs. -No extra plugins are needed for this model. -Lights and cameras are not included in the scenes. Specifications: -Model is included in 4 file formats. -3ds Max V-Ray -3ds Max Mental ray -Cinema 4D R15 V-Ray -OBJ -Model consists of 1600 Faces and 1602 Vertices. -Model consists of quads only. -Model Dimensions: 29.90cm x 29.90cm x 14.19cm -Units in all formats: #centimeters -All Textures are PNG format with the following resolutions: – 4096 x 4096 px Additional Notes: This model was created for 22 hours form our Leading 3D artists to ensure you get the best quality model and save precious production time. If you have any questions, you can contact us trough support. Just send a support ticket!
-
Royal Enfield Bullet C5 Classic 2014 3D Model
The 3D model was created on real car base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* tire’s texture is not included in the set.* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
3D Toyota Prius C 2015 3D Model
The 3D model was created on real car base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* tire’s texture is not included in the set.* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Mercedes-Benz C-class Coupe 2018 VRAY 3D Model
————————————————————————————— High detailed model created by SQUIR team.—————————————————————————————Ready to render at 3dsmax with VRAY.It was rendered at 3dsmax 2015 with vray3.20Rendering scene with all lightning, materials, background setups is included. 3dsmax 2010 format is also included, but without the rendering setups.All of our models was made on the 3dsmax, and we are able to provide uncollapsed modifier stack only for the 3dsmax, but if you’d need the lower polygon version at other programs, please contact with the support, and we will convert the reduced mesh to requested format. For this product there’s 3 different 3dsmax files included.’Set’ is uncollapsed, it’s a file where you can make changes at the model. ‘Hipoly’ is collapsed to hipoly with all the modifiers history cleaned to make it trouble free while using at other programs’Studio’ is the file with all rendering setups that we used to make the previews renderings.Because of different Disk topology at different computers it might be required to change the textures path at the destination computer.————————————————————————————— Thank you for buying SQUIR models—————————————————————————————
-
C Clamp 3D Model
____ C-Clamp 3D MODEL ____Modeled in 3DS MaxPresentation images rendered with Vray 3.0***************************************************> FEATURES:- High quality polygonal model of a C-Clamp- Ready-to-Drop File: File does not include background, lights, or any other object not linked with the actual model. – The Object is correctly scaled and centered at the origin- Objects, Materials and Textures are properlly named and logically grouped.- All texture paths are flat. – Clean Geometry- No N-GONS: Quads and Triangles only- Smooth function can be used to increase mesh resolution if necessary.**************************************************> FORMATS: (This Model has been tested in the following formats, Geometries and textures loaded succesfully) .MAX (3DSMAX – Contains vray and standard materials).MA (MAYA).MB (MAYA).C4D (Cinema 4D).FBX (Multi Format).OBJ (Multi Format)**********************************************- Check our profile to see other Clamp Models.- We hope you like this model, send us an e-mail if you have any question or suggestion to make, your feedback help us improve our work.- Please rate if you like this model.
-
Sony Xperia C4 White 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Mercedes SL 2015 VRAY 3D Model
————————————————————————————— High detailed model created by SQUIR team.—————————————————————————————Ready to render at 3dsmax with VRAY.It was rendered at 3dsmax 2015 with vray3.20Rendering scene with all lightning, materials, background setups is included. 3dsmax 2010 format is also included, but without the rendering setups.All of our models was made on the 3dsmax, and we are able to provide uncollapsed modifier stack only for the 3dsmax, but if you’d need the lower polygon version at other programs, please contact with the support, and we will convert the reduced mesh to requested format. For this product there’s 3 different 3dsmax files included.’Set’ is uncollapsed, it’s a file where you can make changes at the model. ‘Hipoly’ is collapsed to hipoly with all the modifiers history cleaned to make it trouble free while using at other programs’Studio’ is the file with all rendering setups that we used to make the previews renderings.Because of different Disk topology at different computers it might be required to change the textures path at the destination computer.————————————————————————————— Thank you for buying SQUIR models—————————————————————————————
-
17th C. Ming Dynasty Side Table
One purchase gives access to all file formats available. By default only .max file format is selected for download.
-
Letter C Splash
This is a high poly model sculpted in Blender. This is purely a mesh. There are no sims.
