3DHunt.co

Tag: Bushing

  • IGUS Bushing finishing tool 3D Print Model

    IGUS Bushing finishing tool 3D Print Model

    Summary
    IGUS Bushing finishing tool

  • Tronxy X5s Z axis printed split bushing 3D Print Model

    Tronxy X5s Z axis printed split bushing 3D Print Model

    Summary
    When building my Tronxy X5s, I was not impressed by the stock Z axis bearings. So I designed and printed a replacement system. The bushing has a split in it and you slide the sleeve over it and tighten it with 2 M3 screws and nuts. I printed the bushing in PLA and the Sleeve in PETG, but you could print it in PLA. There is also a short version in which a IGUS RJ4JP-01-08 sits on top of it and both are held and tightened by the sleeve. This was created for the people who do not like PLA bushings.
    Print Settings
    Printer:
    SmartRap – Highly modifed
    Rafts:
    No
    Supports:
    No
    Resolution:
    .2
    Infill:
    30
    Notes:
    Set up the number of shells to be enough to create the bushing vertical section without any infill. Allowing the shells to make up the “fingers” of the inner part of the bushing. Mine was 3 shells.
    How I Designed This
    Designed in Fusion 360

  • LME12UU Bushing 3D Print Model

    LME12UU Bushing 3D Print Model

    Summary
    My 1403 Printrbot Simple Metal kit came with bearing blocks that require LME12UU bushings. Hard to find drylin, and even harder to find a quality bearing in this size, a printed alternative works great here. I used a diamond file to sand the sliding surface to a smooth finish.

  • Pivot bushing for cub cadet rzt-50 3D Print Model

    Pivot bushing for cub cadet rzt-50 3D Print Model

    Summary
    I lost the pivot bushing out of the front axle of my rzt-50 from cub cadet. It’s a tight fit, but works
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Clone Rafts:
    No Supports:
    No Resolution:
    .3 Infill:
    100 Notes:
    printed 100 percent infill for strength

  • shift linkage bushing – 2009 pt cruiser 3D Print Model

    shift linkage bushing – 2009 pt cruiser 3D Print Model

    Summary
    I’ve gone through a couple linkage bushings for my PT cruiser, so I decided to start printing them to save time and money. Feel free to remix, this is currently the functional version I’m utilizing and “driving on” with 🙂
    Print Settings
    Printer Brand:
    MakerBot Printer:
    MakerBot Replicator Rafts:
    No Supports:
    No Resolution:
    .3mm Infill:
    15% Notes:
    currently ABS

  • Graphite Bushing E3D Titan Carriage for HyperCube

    Graphite Bushing E3D Titan Carriage for HyperCube

    Summary
    I would like to use Graphite Bushing on my newly built HyperCube, so I make one.
    This mounts the E3D Titan with a Stepper Motor. You will also need an end stop, 2x 81130 graphite bushing, some M3x15 screws and M3 nuts, and super-glue or something that can stick everything together. Since I make it in separated part to print them more easily.
    This is still a WIP
    Print Settings
    Printer:
    MakerOne Rafts:
    No Supports:
    No Resolution:
    0.2mm Infill:
    25%
    How I Designed This
    Using SketchUp