3DHunt.co

Tag: bearings

  • Ball Bearing 3D Model

    Ball Bearing 3D Model

    ball bearing – solidworks – assembled

  • Filament Spool Hub with Print In Place Bearings 3D Print Model

    Filament Spool Hub with Print In Place Bearings 3D Print Model

    Summary
    Hubs to hold your spool in typical 8mm spool holders with print-in-place roller bearings.
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Clone Supports:
    No Resolution:
    I used 0.2 with a 0.3mm nozzle Infill:
    N/A Notes:
    The two hubs should be printed with the “flat” side down. You may need to use a raft if you get a lot of “Elephant Foot” on your first layer. The prints I have made usually needed to have a few of the roller bearings broken free so everything turns freely. If you have trouble with the bearing sticking together, try lowering the extruder temp and/or reducing the filament flow rate a bit.
    I included a cover for the M8 nuts typically used. For these, pause the print at 6.8mm and drop the nuts in, then let it finish.
    Post-Printing
    Assembly:
    Press the hubs into the spool with the spacer between them on the threaded shaft. Snug up lightly with the knobs and place in holder.

  • Large filament spool holder 3D Print Model

  • Stack machine parts 3D Model

    Stack machine parts 3D Model

    stack machine, the institution is a kind of tray plate cascade feeding mechanism, containing the tap and 4 with chrome plated rods, feeding through the linear bearing, the agency through the motor drive, as a kind of typical cascading conveying mechanism This model into a step or iges universal model to download, please reference!Also includes 3d original files, welcome to download!If you like,you can paypal for you to get this models or if you have any questions also you can email to me.

  • hypercube XY_Joiner remix (wider place for bearings) 3D Print Model

    hypercube XY_Joiner remix (wider place for bearings) 3D Print Model

    Summary
    This is my modified version of the XY joiner in the hypercube 3d printer. The width of where you would usually put 2 flange bearings is slightly wider to accommodate toothed pulleys with an outer width of 8.6mm. see pictures for details.
    Please note that the clamp peice needs to be from this page. the clamp from tech2c’s hypercube will not line up with the screws of this XY Joiner.

  • XY Clamp for RJ4JP-01-08 Bearings 3D Print Model

    XY Clamp for RJ4JP-01-08 Bearings 3D Print Model

    Summary
    This is the clamp for the Hypercube to house two Ignus RJ4JP-01-08 bearings. Works with the XY Joiner from here: https://www.thingiverse.com/thing:2012443
    Print Settings
    Printer:
    Anet A8 Rafts:
    No Supports:
    No Resolution:
    0.2 Infill:
    25-30

  • Bearings 3D Print Model

    Bearings 3D Print Model

    Summary
    Bearings

  • Linear bearing compatible with sme8op but with 623 bearings 3D Print Model

    Linear bearing compatible with sme8op but with 623 bearings 3D Print Model

    Summary
    This is the replacement for my prusa i3 linear bearings. The ones I had originally were verry bad and loose. Now it works flawlessly.
    I attached the bearings using m3 screws, but it should be possible to mount it with original m4 screws (but I am not sure, please be warned).

  • Pauls Y-Idlers for 3mm bearings 3D Print Model

    Pauls Y-Idlers for 3mm bearings 3D Print Model

    Summary
    Someone (no not someone) asked me to make a version for 3mm bearings
    This is a redesigned version of this thing