3DHunt.co

Tag: Bearing

  • Pinion conical 3D Model

    Pinion conical 3D Model

    Pinion conical 3D modelTechnical specifications:i=14Number of teeth-1664Module – 2************************The object is modeled in the environment Autodesk Inventor 2018.To create a photo renderer, use Inventor Studio.************************The model contains the most popular formats************************The model contains the most popular formats. Each file was checked for opening and full content by the model.Thank you for coming to see this model. Also pay attention to other models by clicking on the name of the account in the right corner.

  • Pinion conical 3D Model

    Pinion conical 3D Model

    Pinion conical 3D modelTechnical specifications:i=11Number of teeth-1616Module – 2************************The object is modeled in the environment Autodesk Inventor 2018.To create a photo renderer, use Inventor Studio.************************The model contains the most popular formats************************The model contains the most popular formats. Each file was checked for opening and full content by the model.Thank you for coming to see this model. Also pay attention to other models by clicking on the name of the account in the right corner.

  • Pinion conical 3D Model

    Pinion conical 3D Model

    Pinion conical 3D modelTechnical specifications:i=2/1Number of teeth-3216Module – 2************************The object is modeled in the environment Autodesk Inventor 2018.To create a photo renderer, use Inventor Studio.************************The model contains the most popular formats************************The model contains the most popular formats. Each file was checked for opening and full content by the model.Thank you for coming to see this model. Also pay attention to other models by clicking on the name of the account in the right corner.

  • Pinion conical 3D Model

    Pinion conical 3D Model

    Pinion conical 3D modelTechnical specifications:i=14Number of teeth-1664Module – 2************************The object is modeled in the environment Autodesk Inventor 2018.To create a photo renderer, use Inventor Studio.************************The model contains the most popular formats************************The model contains the most popular formats. Each file was checked for opening and full content by the model.Thank you for coming to see this model. Also pay attention to other models by clicking on the name of the account in the right corner.

  • Filament Holder 56mm with Bearing 608Z 3D Print Model

    Filament Holder 56mm with Bearing 608Z 3D Print Model

    Summary
    Filament Holder for 56mm Hole with 605Z Bearing
    Layer high 0,2mm
    Print Settings
    Printer:
    CR10S
    Rafts:
    No
    Supports:
    Yes
    Infill:
    15%

  • Bearing Free 3D Model

    Bearing Free 3D Model

    bearing

  • Ball Bearing 3D Model

    Ball Bearing 3D Model

    This is a realistic 3d model Ball Bearing.Model use the correct topology.You can see it on the model render with a grid.In this model, textures are not applied.These model can be used for presentations, different scenes.Unpack the format that you need, and run it in a 3D editor.I hope you enjoy my work.

  • Arms Robot 3D Model

    Arms Robot 3D Model

    Excellent robotic arm controlled by arduinoStepper motor nema 17Stepper motor 28BYJ48Bearing 608Bearing 625*** ONLY .STL FILES ***without arduino programming.

  • Mbot Grid II+ corner bearing holder 3D Print Model

    Mbot Grid II+ corner bearing holder 3D Print Model

    Summary
    Previous drawing was pretty acurate to the original part
    But original part was designed With injection molding in mind
    I’ve simply filled some void to make this new one sturdier with 3dprinting in ming
    Same Functionality

  • Anycubic i3 Mega IGUS RJM-01 Bearing Adapter 3D Print Model

    Anycubic i3 Mega IGUS RJM-01 Bearing Adapter 3D Print Model

    Summary
    These bearing adapter can mount the IGUS RJM-01 (and maybe the RJMP-01) bearings on the ultrabase printbed. The design has been optimised to fix the bearing without squeezing it to much, so the bearing will not be deformed. the printbeds height remains the same as with the stock bearings. The design will be tested during the next days/weeks, hopefully there will not be the need to insert retaining rings to hold the bearing in place. Current design allows the use of a single bearing, maybe i will upgrade it to a double bearing version after the basic design is tested. For the current test, i used 0.15 layers of nx2 pla from extrudr, which actually sticks like hell on the ultrabase printbed (; (200°C, 60°C).

  • Bearing puller Free 3D Model

    Bearing puller Free 3D Model

    bearing puller with bearing and shaft

  • Bearing Block 3D Print Model

    Bearing Block 3D Print Model

    Summary
    A replacement for the cheap imports with to much play or slop in the main hole. These make a press fit for either plastic drylin bushings which are very quite or you can stick with ball bearings. The 4mm x .7 tapped holes are just predrilled since I am not comfortable with threads that small in plastic. Just hand tap after making or edit the design.
    Print Settings
    Printer:
    Zonestar 802qrs
    Rafts:
    Yes
    Supports:
    No
    Resolution:
    .2 mm
    Infill:
    100%

  • Ball Bearing 3D Model

    Ball Bearing 3D Model

    ball bearing – solidworks – assembled

  • Bearing unit 8mm bearing KFL08 3D Print Model

    Bearing unit 8mm bearing KFL08 3D Print Model

  • Ring Bearing 3D Print Model

    Ring Bearing 3D Print Model

    Summary
    If you print this model please upload a “make” so I can see your results.
    This is a test of print settings. Good luck!

  • Bearing holder 3D Print Model

    Bearing holder 3D Print Model

    Summary
    Bracket to hold bearing as a small wheel

  • Turret Ring Slew Bearing base and main pulley for Moveo Robot Arm 3D Print Model

    Turret Ring Slew Bearing base and main pulley for Moveo Robot Arm 3D Print Model

    Summary
    This is another modification based off of Labala’s excellent Moveo upgrade parts. This time I’ve bored out the main pulley for arm rotation and made a matching base for it. This uses an inexpensive 5.5″ (140mm) turntable bearing (I used this one specifically https://www.ebay.com/itm/1pc-new-5-5-140mm-Home-Hardware-Aluminum-Round-Lazy-Susan-Bearing-Turntable/122799616711?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649) as well as 8 M4 trapazoid head bolts and nuts. 35mm – ish should work fine. You may need to go with phillips head ones in this instance to get proper countersink clearance.
    Assembly instructions:
    you will need the other half of the base, the motor mount, cover and belt tensioner from Labala’s project.
    install the ring on the printed base, with the ring clearance extension down, make sure the bolts are tight. Consider using lockwashers here.
    install the nuts in the pulley ring, and bolt it to the stock arm base using the stock bolts.
    bolt the turntable slew bearing to the bottom of the pulley
    Assemble the remaining base components.
    Thats it, you now should have a robot arm you can bolt to a baseplate or something.
    Future expansion plans will include some sort of mount for a 2 stage slip ring assembly (large outer 12 ring, smaller inner 24 ring maybe?
    I’m printing the larger piece now, will post pictures when it’s done.
    Print Settings
    Printer Brand:
    LulzBot Printer:
    TAZ 5 Rafts:
    No Supports:
    Yes Resolution:
    0.5mm nozzle, ABS (PLA might work better here) Infill:
    15% infil, 7 shells. Notes:
    This is going to require support for the mounting tabs and the slew ring recess.

  • Radial ball bearing Free 3D Model

    Radial ball bearing Free 3D Model

    Rendered in Keyshot 5.0.99.

  • AM8 Z Axis Single Bearing 3D Print Model

    AM8 Z Axis Single Bearing 3D Print Model

    Summary
    I’ve broke a few of these trying to slide it onto the 2020 v-slot extrusion. The back of it also rubs against the 2040 vertical extrusions. I removed some of the material from the inside to allow it to slide onto the 2020 easier and removed some from the back so it didn’t rub on the 2040 vertical extrusions.
    Mirror the part for the opposite side.
    Print Settings
    Printer:
    AM8 Rafts:
    No Supports:
    No Resolution:
    .2 Infill:
    80%

  • Angular contact roller bearing Free 3D Model

    Angular contact roller bearing Free 3D Model

    Angular contact roller bearing with 50 mm hole and 110 mm outer diameter.

  • 608Z bearing holder 3D Print Model

    608Z bearing holder 3D Print Model

    Summary
    Bearing holder for 608ZZ 22mm x 7 mm. bore =8mm
    printed in ABS 0.2mm resolution

  • Z Axis Bearing Holder 3D Print Model

    Z Axis Bearing Holder 3D Print Model

    Summary
    Z Axis Bearing Holder 1.0 for 3030 profil
    Print Settings
    Rafts:
    No Supports:
    No Resolution:
    0,2 Infill:
    30-50

  • Working stage module 3D Model

    Working stage module 3D Model

    Working stage module，Xy double station transfer station is made up of the homemade sliding rail screw mechanism through Xy axis.If you like,you can paypal for you to get this models or if you have any questions also you can email to me.

  • Helical gearing module 3D Model

    Helical gearing module 3D Model

    The helical gear drive mechanism, which is the typical inclined gear steering application, has a large load and avoids the interference of the overall mechanism through the support of the bearing pedestal, which ACTS as a load-carrying functionIf you like,you can paypal for you to get this models or if you have any questions also you can email to me.

  • Homemade guide screw module 3D Model

    Homemade guide screw module 3D Model

    Homemade guide screw module , cantilever type, characteristics of the model 1: cantilever structure, the agency shall be carried out in a big load of cantilever, accordingly institutions need to bear the load, at the same time not big volume 2. Homemade screw, the model available bearing to bearing seat, from purchasing standard parts, bearing the same precision at the same time Design can be used as a template to the model code into a step or iges universal model download, please reference!Also includes 3d original files, welcome to download!If you like,you can paypal for you to get this models or if you have any questions also you can email to me.

  • Pressing group mechanism 3D Model

    Pressing group mechanism 3D Model

    Pressing group mechanism, this module adopts cylinder and linear bearing or copper sleeve to lead the pressure cooperation industry.In order to guarantee the horizontal pressure, the design adjustment plate is restricted.The overall model is simple, typical and welcome to learn to download.This model is transformed into step and iges general model download, please refer to!Also includes 3d original files, welcome to download!if you like,you can paypal for you to get this models or if you have any questions also you can email to me.

  • Multi-function cylinder mechanism 3D Model

    Multi-function cylinder mechanism 3D Model

    Multi-function cylinder mechanism, this component contains pressure, rotation, clamping motion.All of them are realized through the cylinder, so that the complex functions can be realized through the simple component model, which is often used in this design.This model is transformed into step and iges general model download, please refer to!Also includes 3d original files, welcome to download!if you like,you can paypal for you to get this models or if you have any questions also you can email to me.

  • Plastic pressing machine 3D Model

    Plastic pressing machine 3D Model

    Plastic pressing machine, the machine used for plastic clip separation, through the cylinder and linear bearing drive, pneumatic press, separation of products, at the same time slot in two work station.This model into a step or iges universal model to download, please reference!Contains the original image file 3 d at the same time, welcome to download!if you like,you can paypal for you to get this models or if you have any questions also you can email to me.

  • Tnut Spool Bearing 3D Print Model

    Tnut Spool Bearing 3D Print Model

    Summary
    I wanted something to lift the spool off the 20/20 extrusions. This definitely reduced the friction. I used normal skate bearings.

  • 50mm Pulley (2x 608 bearing) 3D Print Model

    50mm Pulley (2x 608 bearing) 3D Print Model

    Summary
    This is a basic pulley. It has a 50mm main wheel and will handle up to a 10mm or 3/8″ line. You need two 608 skate bearings, and two 8mm x 35-40mm bolts and nuts. You can either tie a line to the top or use a carabiner as a clip. There are two wheel designs one fancy and one easier to print. I find that the wheels print well in the standing position with support. If you have problems printing that way the simpler design can be printed on its side. I may include a no bearing wheel very soon. The sides should be printed flat with 30% or more infill. I used 2mm walls, top and bottom with 30% infill. That basically makes the sides 100% with a little infill around the top block. There will be more variants, so stay tuned.
    Enjoy.
    If you like my designs why not tip me a dollar or two. Your support will allow me to spend more time on these designs and their variations. Thanks!

  • Audi B5 S4 Drive Shaft Center Bearing Support 3D Print Model

    Audi B5 S4 Drive Shaft Center Bearing Support 3D Print Model

    Summary
    Audi B5 S4 Drive Shaft Center Bearing Support
    Just something to pack out the rubber webbing in the center support on the drive shaft and firm things up.
    Pretty much only fits in there one way so easy to figure out.
    Hardware:
    6pcs M4 x 40mm Bolt
    6pcs M4 Lock Nut
    12pcs M4 Washer

  • HyperCube XY LM8UU Bearing Clamp With Skull 3D Print Model

    HyperCube XY LM8UU Bearing Clamp With Skull 3D Print Model

    Summary
    Added a nice skull on the Hypercube XY bearing clamp
    Print Settings
    Printer:
    Homemade Printer Resolution:
    0.2 Infill:
    100

  • BB Ball Bearing 3D Print Model

    BB Ball Bearing 3D Print Model

    Summary
    this is a bb ball bearing you use bb you but in 8 bb or more and oil it

  • Bearing 3D Model

    Bearing 3D Model

    High detailed 7 ball bearing.Width -.275″/7mm, Outside Dia -.865″/22mm, Inner Dia. -.311″/8mmFile formats: .lxo .obj .lwo .dae .fbxModo built in materials and render.

  • Anet A8 (Prusa) Z axis synchronising gizmo, 608 bearing 3D Print Model

    Anet A8 (Prusa) Z axis synchronising gizmo, 608 bearing 3D Print Model

    Summary
    Modified for the 608 bearing. Changed the 2 pulleys to one pulley, and added .1 to the inner diameter, and swapped out the toothed pulley for deeper toothed one (by Grimlock_UK).
    Print Settings
    Printer:
    Anet A8 Rafts:
    No Supports:
    No Resolution:
    .2 Infill:
    30 Notes:
    See original post by FredGenius for instructions and tool to put belt together.https://www.thingiverse.com/thing:2350350

  • Z-axis Wobble Isolation Bearing Blocks 3D Print Model

    Z-axis Wobble Isolation Bearing Blocks 3D Print Model

    Summary
    Isolated bearing blocks for Z-axis. No mounts for brass nuts.
    Left bearing block has been scalloped, to allow Y-axis trigger switch to be mounted from the rear.
    Right bearing block has been scalloped to allow recessed idler pulley arm.
    Appropriate idler pulley arm included in file bundle.
    Use with integrated Z-axis wobble isolation risers here: https://www.thingiverse.com/thing:2458534

  • Tronxy x3 Z leadscrew stabilizer bearing support 3D Print Model

    Tronxy x3 Z leadscrew stabilizer bearing support 3D Print Model

    Summary
    I needed a stabilizer that would house a 16mm bearing, as that is all I had. So I designed these instead of using the 22mm 608z skate bearings. The bearing is a 16x5x8. Enjoy.
    Print Settings
    Printer:
    Tronxy X3 Rafts:
    No Supports:
    Doesn’t Matter Resolution:
    .2 ish Infill:
    your liking

  • Slingshot 3D Model

    Slingshot 3D Model

    SLINGSHOT=================================- Modeled in Blender.- Preview image rendered using cycles.- All scene are included in .blend files.- Poly count are before sub division- Great for close up render.- All parts and materials are logically named.OTHER FORMATS=================- 3ds MAX- COLLADA (.dae)- Autodesk FBX- OBJ

  • Linear bearing compatible with sme8op but with 623 bearings 3D Print Model

    Linear bearing compatible with sme8op but with 623 bearings 3D Print Model

    Summary
    This is the replacement for my prusa i3 linear bearings. The ones I had originally were verry bad and loose. Now it works flawlessly.
    I attached the bearings using m3 screws, but it should be possible to mount it with original m4 screws (but I am not sure, please be warned).

  • Ball bearing suport – 625z 3D Print Model

    Ball bearing suport – 625z 3D Print Model

    Summary
    Ball bearing suport.
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Mk1 Rafts:
    Doesn’t Matter Supports:
    Yes Infill:
    25%

  • Anet A6 Spoolholder(w/608 bearing) 3D Print Model

    Anet A6 Spoolholder(w/608 bearing) 3D Print Model

    Summary
    Anet A6(DIY Kit) have a default spoolholder that is not smooth, not built with bearing.
    So I build spoolholder with two 608 bearing.
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Clone Rafts:
    No Supports:
    No Resolution:
    0.3mm Infill:
    30% or any Notes:
    Printed with Anet A6 printer
    Post-Printing
    After printing, Indentate two 608 bearing at both side.

  • Maker Select v2 Z axis Bearing Mounts 3D Print Model

    Maker Select v2 Z axis Bearing Mounts 3D Print Model

    Summary
    previously I created a set of X-ends for the Monoprice Maker Select v2 to replace the stock metal ones because I wanted a way to use standard LM8UU bearings for the z-axis. Those have been installed on my printer for the last couple of months, but I figured I’d try making a set of bearing holders in case any of you want to use different bearings, but are happy with the metal x-ends that your printer came with.
    These seem to work pretty well. Just screw them in from the bottom, slide the bearing into place, and you should be good to go.
    I printed these in ABS with 4 perimeters and 40% infill, but the walls are pretty thin so you could probably do them 100% infill and it wouldn’t make much difference in print time.

  • Roller bearings 3D 3D Model

    Roller bearings 3D 3D Model

    Modeled in blender of 2.78.All the names of the meshes and materials have logical names.The number of polygons/vertices without the use of modifiers: 34.478/35.340All pivot points aligned.Preview made using render Cycles.Scene file (.blend) ready to render.Materials made in Cycles.

  • Roller bearings 3D Model

    Roller bearings 3D Model

    Modeled in blender of 2.78.
    All the names of the meshes and materials have logical names.
    The number of polygons/vertices without the use of modifiers: 34.478/35.340
    All pivot points aligned.
    Preview made using render Cycles.
    Scene file (.blend) ready to render.
    Materials made in Cycles.

  • Ballz Fidget Spinner 3D Model

    Ballz Fidget Spinner 3D Model

    ‘Ballz Fidget Spinner’ is a high & accurate model to add more details and realism to your projects. Detailed enough for close-up renders. *********************************Features:- Model resolutions are optimized for polygon efficiency(in 3DS MAX the meshsmooth function can be used to increase mesh resolution if necessary).- All colors can be easily modified. – No part-name confusion when importing several models into a scene. – No cleaning up necessary, just drop model into your scene and start rendering.- No special plugin needed to open scene.- HDRI background i used is not included- No textured just material apply*********************************File formats:- Max – FBX (Multi Format)- OBJ (Multi Format)- Cinema 4D R17************************************Hope you like it! Also check out my other models, just click on my user name to see complete gallery.Infos about my work:I work always my files with a lot of attention to details, good topology and optimizes polygons, I also bring a serious touch in the provided textures.I would like to thank every guys who bought my files, you motivate me to produce some more very nice 3d models.Newlc – 2017

  • BEARING BEARING 08-24-07 mm 3D Print Model

    BEARING BEARING 08-24-07 mm 3D Print Model

    Bearing inside diameter 8mm outside diameter 24mm height 7mm number of ball 10 Best regards

  • 608 Bearing Fit Test 3D Print Model

    608 Bearing Fit Test 3D Print Model

    Summary
    This is my test for 608 (repeat… “608” bearings. I had a typo of “609” that is in the filename.) I used it to calibrate my printer so that the hole fits a 608 bearing with a press-fit. You can also compute a multiplier for scaling a fidget spinner with this. Hope it helps.
    How I Designed This
    Fusion 360 for the win.

  • Ball bearing 0.6 tol 3D Print Model

    Ball bearing 0.6 tol 3D Print Model

    Ce model de roulement a une tolerance de 0.6 mm se qui beaucoup plus élevé que la moyenne. Cela va donc évité que les bille fusionnes avec les autres ou le support lors de l’impression. En bref ceux qui n’arivé pas a imprimé un roulement c’est le model qu’il vous faut.

  • Fidget Spinner EDC Hand Spinner 3D model 3D Model

    Fidget Spinner EDC Hand Spinner 3D model 3D Model

    ‘Fidget Spinner EDC Hand Spinner’ is a high & accurate model to add more details and realism to your projects. Detailed enough for close-up renders. *********************************Features:- Model resolutions are optimized for polygon efficiency(in 3DS MAX the meshsmooth function can be used to increase mesh resolution if necessary).- All colors can be easily modified. – No part-name confusion when importing several models into a scene. – No cleaning up necessary, just drop model into your scene and start rendering.- No special plugin needed to open scene.- HDRI background i used is not included- No textured just material apply*********************************File formats:- Max (vray and standart mat)- FBX (Multi Format)- OBJ (Multi Format)- Cinema 4D R17************************************Hope you like it! Also check out my other models, just click on my user name to see complete gallery.Infos about my work:I work always my files with a lot of attention to details, good topology and optimizes polygons, I also bring a serious touch in the provided textures.I would like to thank every guys who bought my files, you motivate me to produce some more very nice 3d models.Newlc – 2017

  • Batman Hand Spinner 3D Model

    Batman Hand Spinner 3D Model

    ‘Batman Hand Spinner’ is a high & accurate model to add more details and realism to your projects. Detailed enough for close-up renders. *********************************Features:- Model resolutions are optimized for polygon efficiency(in 3DS MAX the meshsmooth function can be used to increase mesh resolution if necessary).- All colors can be easily modified. – No part-name confusion when importing several models into a scene. – No cleaning up necessary, just drop model into your scene and start rendering.- No special plugin needed to open scene.- HDRI background i used is not included*********************************File formats:- Max (vray and standart mat)- FBX (Multi Format)- OBJ (Multi Format)- Cinema 4D R17************************************2 uv bump map textures JPEG 4096*4096px available in zip file**********************************Hope you like it! Also check out my other models, just click on my user name to see complete gallery.Infos about my work:I work always my files with a lot of attention to details, good topology and optimizes polygons, I also bring a serious touch in the provided textures.I would like to thank every guys who bought my files, you motivate me to produce some more very nice 3d models.Newlc – 2017

  • LM8LUU File down bearing 3D Print Model

    LM8LUU File down bearing 3D Print Model

    Summary
    I remixed this bearing because some people have problems printing exact sizes, the bearing I made should fit off the printer, but with only 5 access points you can easily hand file the inner diameter with a small file if you need to. I recommend using PLA, on a smooth rod this bearing should last for many years be for it gets enough slop to be noticeable.
    Print Settings
    Rafts:
    Yes Supports:
    No

  • Weight Bearing Keychain Grappling Hook

    Weight Bearing Keychain Grappling Hook

    Summary
    Ok, so the two piece hook didn’t actually survive my weight for long. The simpler flat hook did however, and it seemed like it could do so indefinitely. I weigh about 200 lbs. and was swinging around a bit so a couple extra lbs. of centrifugal force too. Tied to 3mm Kevlar line. Don’t actually use this for anything life threatening, obviously.
    Printed with PLA 100% infill, a raft is a must because it warps so much while printing. The two piece file is included if anyone wants to improve on it, it broke at the slot so a larger hook with more material around that area may help, but the goal was to make a weight bearing grappling hook that was as small as possible.
    Print Settings
    Printer Brand:
    MakerBot Printer:
    MakerBot Replicator 2 Rafts:
    Yes Supports:
    No Resolution:
    0.3mm Infill:
    100%