Author: FormFonts

Description: Domestic coffee bean roaster

Description: Commercial coffee bean roaster

Description: Sand dollar dining table and chairs
from Link Outdoors. Constructed
from oiled teak, they are the high-
end standard in outdoor furniture.

Description: Echo barstool from Link Outdoor.
Suitable for exterior
use.29 inches high, 18.5 inch diameter.

Description: Echo barstool. Suitable for exterior
use.29 inches high, 18.5 inch diameter.

Description: Females in short dress.

Description: Standing women

Description: Parrish Sconce

Description: Ginevra lounge chair by Tirolo.

Description: The Carter lounge chair by Tirolo.
Available in a wide range of fabrics
and leathers. Shown in Geo Noir
fabric by Kirkby Design

Description: Xie barstool by Tirolo

Description: Generic lumbar cushion, a nominal 12″
/ 30cm wide. Replace mapped
texture to suit personal preference.

Description: Emu Thor #655 chair in powder-
coated steel. Available in a wide
range of colours; simply repaint to
suit

Description: Ciclo double vanity unit by
Porcelanosa. 19″ deep 9ft long. The
model includes the mirror and
accessory rack and will import at
the height shown (29″ countertop
height)

Description: Emma pendant lamp by Mitzi. 6″
diameter, 6.75 high

Description: Novel desk/dining table from Zuo
Modern. Stainless steel with
toughened glass top . 73″W 33.5″D
29″H

Description: Lexington bookcase by Bontempi
Casa. Type A 125cm W, 38cm D,
182cm H

Description: Upholstered panel bed by
Harborcreek. The headboard
surround is available in wood, as
presented…but can be repainted
with the same material as the inset
panel. King sized, mid height. 67″H
76″W 90″L

Description: Sit on top kayak. Available in two
versions…medium and low poly.
The hulls are identical, the savings
being made in a the many repeated
small fixtures. The manned versions
feature the lower poly model.

Description: A selection of low-poly generic
kayaks

Description: Female kayakers

Description: Man in kayak. Traditional and sit on
top.

Description: Hawkins chandelier. Length 51″, width
16″ height adjustable between 10.5″ –
34.5″

Description: Barrel chair in velvet material.

Description: Darrol L-shaped corner desk. Both
sides against wall measure 71″

Description: West Elm Show Wood Mid-Century
Chair.

Description: Further configurations of sofa and
modular sofa/chaise. These include
a standard sofa of length 9 ft and
two modular units of length 98″,
together with a double-length
ottoman. Back cushion
configurations for this range are
almost limitless, but I’ve hopefully
given enough to play around with.

Description: Ray sofa and modular sofa/chaise
by B&B Italia. There are a
bewildering number of
configurations and lengths, so I
have tried to make them easily
modifiable by editing the groups to
stretch/shorten the length of the
base/seat/back cushions. This
collection of configs include a 92″
standard sofa and 63″ modular
sofas and chaise.

Description: Gubi Stay chair on swivel base. It
comes in two sizes. Both are 78cms
high, with the large version
measuring 85×85 cms and the
small, barrel chair version
measuring 70x70cms

Description: Two secure gun cabinets, both 55″ /
1.4m high…although can obviously be
resized.

Author: Alan Fraser

Description: A collection of national flags,
standing upright. These are the
kind intended for interior
use…classrooms, conferences etc,
standing a total of about 9 ft high
and
can be switched to any other
design fairly easily. Simply prepare
a 512×307 pixel image of the flag
required and swap it in the
SketchUp Material editor. The USA
pole is surmounted by an eagle; all
the others have a simple ball shape.
It’s a separate group, so you can
add your own.

Description: Flags of the British services.
Included are the red, white and
blue ensigns, the RAF ensign and
the union flag (it’s only a “jack”
when it’s on a ship.) These have
been designed specifically to fit on
the Cenotaph in Whitehall, London
and are consequently about 15 ft
high and angled at 2.5 degrees to
the vertical. If you require such a
flag for any other nation or state, it
can easily be modified by creating
a 512×307 pixel image of the
required flag and swapping it in the
SketchUp Material Editor. It should
automatically map correctly. You
might have to replace the crown on
the top of the pole with something
else.