3д модель боевой машины из игры “Resident Evil 6”
Tag: apc
-
AT-AT Walker 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
TANK Panzer BTR Stryker 3D Model
TANK Panzer BTR Stryker 3D modelLoy poly modelModel formats:- *.max (3ds Max)- *.max (3ds max vray )- *.fbx (Multi Format )- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)
-
BTR-70 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
BTR-60PU 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Sci-fi Tank 3D Model
High quality model of Sci-fi tank with PBR textures specially for your projects.Quality and accurate modeling, allows you to use model in any projects. Elaborated all small details, accurate UVW mapping and high-resolution textures make the model more realistic, allowing you to use a model in high-resolution renderers (close-up), as well as for creating videos, or video advertising or use in the film industry. Also perfectly suitable for game engines like Unity 5 or Unreal 4.The model is created in Autodesk 3ds Max 2018, rendered with Vray 3.60.03, textures and materials are included.Please don’t forget to rate the model, for me it is very important :)All objects are named correct for easy selections and management. All materials and textures named correct. No Photoshop or compositing used, Product is ready to render out-of-the-box.Textures:There are a few archives with different textures:1. Vray textures – diffuse, glossiness, height, IOR, Normal, Specular (all maps are 4096*4096).2. Unity 5 textures PBR (for standart shader with metallic workflow) – Albedo-transparency, Metallic-Smoothness, Normal, AO (all maps are 4096*4096). It is a unitypackage file, so it is ready for import. You can see screenshots from Unity 5 above.3. PBR textures for Marmoset – Albedo, AO, Metalness, Normal, Roughness (all maps are 4096*4096). Marmoset scene is included. You can see renders from Marmoset above.You can decrease resolution of textures if you need.File includes the model with the environment. Cameras, lights, render settings are included! You can press render and get the result.Model is perfectly suitable for games and game engines.Thank you very much for buying my models!
-
VAB APC 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
APC UPS Button Assembly 3D Print Model
Summary
This is a replacement off/on/test button for APC UPS units.
You need to print the STL which contains two parts. Install them into the front panel of the UPS back to back and reinstall the PCB. -
SDKFZ 251 Ausf C – Hanomag AA- vehicle – 8 3D Model
SD.KFZ.250/10 Ausf.C – Hanomag Anti-aircraft vehicle – Flak Regiment Hermann Göring Division – Tunisia 1943.Originally modelled in cinema4D 11.. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.Features:- Inside scene: -model – 26 textures- All materials, bodypaint-textures and textures are included.- No cleaning up necessary, just drop your models into the scene and start rendering.- No special plugin needed to open scene.- Phong shading interpolation / Smoothing – 35°- c4d Version- Polygones – 409415 Vertices – 333165 – 215 Objects – 26 textures- obj File – lwo file – 3ds file – fbx file Version 2010
-
VBCI All Pack 3D Model
VBCI infantry fighting vehicle contractorsIn November 2000, the French Ministry of Defence awarded a contract to Giat Industries (now known as the Nexter Group) and Renault VI (now Renault Trucks) for the first 65 vehicles (54 VCI – including 12 with the Eryx missile system – and 11 VPC). A joint venture company, Satory Military Vehicles, was set up by Giat and Renault Trucks to be responsible for the VBCI and a number of other vehicles.In September 2003, it was decided to wind up this company and reorganise relations between the two companies.It was determined that Giat would be prime contractor and have responsibility for marketing of the VBCI, the AMX 10P and AMX 10RC. Renault Trucks Defense is the prime contractor with responsibility for marketing of the VAB.Renault has responsibility for the mobility systems, including the driver’s station, engine, gearbox, suspension and axles and on-board electrical networks. Nexter is responsible for the armoured hull, interior furnishing, assembly and integration of the turret and vehicle, observation, command and control, weapons and self-protection systems.
-
VBCI VPC 3D Model
SHARECREW, VCI INFANTRY FIGHTING VEHICLETwo crew, plus nine combat teamCREW, VCP COMMAND POST VEHICLESevenMANUFACTURERSNexter Systems and Renault Trucks DéfenseOPERATORFrench ArmyExpandThe French Army has selected the Nexter / Renault VBCI 8×8 infantry fighting vehicle as a successor to the AMX10P. The VBCI (vehicule de combat d’infanterie) is a wheeled 8×8 infantry fighting vehicle with modular protection that can be adapted to the threat. Conditional orders have been placed to cover the supply of 700 vehicles to the French Army in two versions. There will be up to 550 VBCI/VCI infantry fighting vehicles and 150 VBCI/VPC command post vehicles.
-
Alvis FV105 Sultan 3D Model
FV105 Sultan is a British Army command and control vehicle based on the CVR(T) platform ( Scorpion, Samaritan, Spartan, Scimitar,Samson……) It has a higher roof than the APC variants, providing a more comfortable “office space” inside for command crew. Only the tracks & lights are textured, maps included
-
Light Armored Transport 3D Model
Model is divided into parts.•Tower and mgs are separated•All wheels are separated•The body of the vehicle is separated•Texture size 4096 x 4096•Model resolution 15.5k tris•Ready-to-use
-
Heavy Armored Personnel carrier 3D Model
The armored personnel carrier is divided into parts.•Tower and barrel are separated•All wheels are separated•The body of the vehicle is separated•Texture size 4096 x 4096•Model resolution 17k tris•Texture format jpg
-
SDKFZ 251-17 AusfC – Hanomag Anti-aircraft vehicle 3D Model
SD.KFZ.250/10 Ausf.C – Anti-aircraft vehicle armed with a 2cm KwK38.Originally modelled in cinema4D 11.. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.Features:- Inside scene: -model – 31 textures- All materials, bodypaint-textures and textures are included.- No cleaning up necessary, just drop your models into the scene and start rendering.- No special plugin needed to open scene.- Phong shading interpolation / Smoothing – 35°- c4d Version- Polygones – 462249 Vertices – 369128 – 221 Objects – 31 textures- obj File – lwo file – 3ds file – fbx file Version 2010
-
SDKFZ 251-17 AusfC – Hanomag Anti-aircraft vehicle 3D Model
SD.KFZ.250/10 Ausf.C – Anti-aircraft vehicle armed with a 2cm KwK38.Originally modelled in cinema4D. Detailed enough for close-up renders.Features:- Inside scene: Model without textures- No cleaning up necessary, just drop your models into the scene and start rendering.- No special plugin needed to open scene.- Phong shading interpolation / Smoothing – 35°NOTE: The file contains only the model without any textures.- c4d Version R16- Polygones – 462249 Vertices – 369128 – 221 Objects- obj File – lwo file – 3ds file – fbx file Version 2010
-
Renault UE Chenillette tankette 3D Model
2ww apc armor armourarmy battle carrier chenillette combat infantry main mbt military personnel renault rocket tanktankette vehicle war ww2
-
BTR-4 Bucephalus armoured personnel carrier 3D Model
The BTR-4 “Bucephalus” is a 8×8 wheeled armoured personnel carrier (APC) designed in Ukraine by the Kharkiv Morozov Machine Building Design Bureau as a private venture. The prototype, which was designed as a private venture, was unveiled at the Aviasvit 2006 exhibition held in Ukraine in June 2006.
-
Armored personnel carrier 577 from the movie Aliens 3D Model
The M577 Armored Personnel Carrier (APC) is a troop transport used by the United States Colonial Marine Corps in movie Aliens. The M577 evolved from the Marine 70 battlefield deployment strategy, which proposed a requirement for a low-cost lightweight APC capable of being transported into combat aboard the UD-4L Cheyenne Dropship.Model dimensions:- length – 8847,9 mm- width – 3620 mm- height – 2974,5 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:http://avp.wikia.com/wiki/M577_Armored_Personnel_Carrierhttps://www.youtube.com/watch?v=Yn1M9MlKVTUhttp://bigbenalpha.tumblr.com/post/145516845835/bmashina-%D0%BC577-armored-personnel-carrier-from
-
Abrams M-1 A-2 USA MBT 3D Model
Abrams M-1 A-2 USA MBT 3D modelHighly detailed 3D model Abram M1A2.The M1 Abrams is a third-generation main battle tank produced in the United States. It is named after General Creighton Abrams, former Army Chief of Staff and Commander of US military forces in Vietnam from 1968 to 1972. The M1 is a well armed, heavily armored, and highly mobile tank designed for modern armored ground warfare.[6] Notable features of the tank include the use of a powerful gas turbine engine, the adoption of sophisticated composite armor, and separate ammunition storage in a blow-out compartment for crew safety. With a weight of close to 68 short tons (almost 62 metric tons), it is one of the heaviest main battle tanks currently in service.
-
GTK Boxer 3D Model
APC GTK Boxer low poly model for games and the background. Applied camouflage Bundesfera, at the request you can change the color and coloring on any other.
-
SD.KFZ 250/1 – Half-track troop carrier 3D Model
Free File Conversions: Need this 3d model in another format? please Contact Support to verify we can provide the format you need.
-
German Half Trucks – Collection 3D Model
Free File Conversions: Need this 3d model in another format? please Contact Support to verify we can provide the format you need.
-
Patria XA-203 armoured personnel carrier 3D Model
The Patria Pasi is a Finnish made six-wheeled armoured personnel carrier (APC) originally designed for Finnish Defence Forces. The first version was produced in 1983 and serial production began in 1984. It was designed to operate with ease of use, simple structure and low-cost maintenance. The basic appearance and configuration of Patria Pasi is similar to most wheeled APCs. The XA-180 and XA-185 versions are fully amphibious while the XA-203 is not.
-
TIFV C25 Infantry Fighting Vehicle 3D Model
TIFV -Turkish Infantry Fighting VehicleFor the Turkish version of the license is used for marking TIFV (Turkish Infantry Fighting Vehicle). The vehicle is based on the type M113, sharing a significant proportion of parts.
-
PTS-M 3D Model
PTS-M – a floating conveyor medium modernized.Caterpillar floating conveyor PTS-M is designed for amphibious crossings through water barriers of artillery systems, wheeled and caterpillar tractors, armored personnel carriers, cars, personnel and various cargoes.
-
Gorets-K Mine-Resistant Ambush Protected Vehicle 3D Model
Highlander-K – Russian explosion-proof armored special vehicle (similar to MRAP-type vehicles) for carrying out tasks in mountainous conditions.
-
Amphibious Armoured Personnel Carrier BTR 80A 3D Model
BTR 80A 80 machine gun russian army carrier personnel armored armoured war military wheel weapon apc vehicle transport amphibious combat Police
-
3D Russian Armoured Vehicles 3D Model
Russian Armoured Vehicle Amphibious Personnel Carrier BTR 80 80A BTR-80 BRDM 2 Soviet BTR80 machine gun army armored military apc transport combat
-
BMP-64 with BM-7 armoured personnel carrier 3D Model
BMP-64 is an experienced Ukrainian infantry fighting vehicle, also classified as a heavy armored personnel carrier. The machine was developed by the Kharkov armored repair plant on the basis of the chassis of the T-64 tank, which underwent a deep modification.BM-7 “Parus” is a universal combat tower of Ukrainian production, intended for installation on infantry fighting vehicles and armored personnel carriers.
-
BMP-64 armoured personnel carrier 3D Model
BMP-64 is an experienced Ukrainian infantry fighting vehicle, also classified as a heavy armored personnel carrier. The machine was developed by the Kharkov armored repair plant on the basis of the chassis of the T-64 tank, which underwent a deep modification.
-
Zubr LCAC Hovercraft 3D Model
3D model Russian hovercraft “Zubr” for game ready & rendering.The Zubr class (Project 1232.2, NATO reporting name “Pomornik”) is a class of air-cushioned landing craft (LCAC). This class of military hovercraft is, as of 2012, the world’s largest, with a standard full load displacement of 555 tons. The hovercraft is designed to sealift amphibious assault units (such as marines and tanks) from equipped/non-equipped vessels to non-equipped shores, as well as transport and plant naval mines.Textures: 2048x2048Diffuse, Nirmal, Height, Roughness.
-
Hipopotam APC 3D Model
The Hipopotam (hippo) multi-role armored vehicle was developed by the Polish AMZ Kutno. It is a clean sheet design. Its development commenced in 2010 and has been funded by the Polish government. This armored vehicle was revealed in 2012.The Hipopotam is not an armored personnel carrier, however it can be also used as one. It is planned as complement to the Polish Rosomak APCs. It is a license-produced version of the Patria AMV. This armored vehicle is intended to suit many specialized roles. The Hipopotam has large internal volume and a 5 t cargo capacity. It might be used as armored ambulance, engineering vehicle, logistic vehicle, air defense missile carrier, specialized equipment carrier and so on. The smaller Rosomak APC lacks internal volume for these applications.
-
AMZ Dzik-3 3D Model
Dzik (Polish: Wild Boar) is a 4.5-ton Polish-made multi-purpose infantry mobility vehicle. Produced by the AMZ works in Kutno, it is designed for serving both the patrol and intervention roles, as well as an armoured personnel carrier for use by various peace-keeping and policing forces. Its armour provides defence against 7.62 mm bullets. The Dzik-3 also boasts bulletproof windows, puncture-proof tires and smoke launchers.Dzik-3 (also known by the Iraqi designation Ain Jaria 1) with 4 doors, room for up to 11 soldiers, 13 firing ports, machine gun turret and two double smoke grenade launchers.
-
RG-31 Nyala 3D Model
The RG-31 Nyala is a 4×4 multi-purpose mine-resistant ambush protected infantry mobility vehicle manufactured in South Africa by Land Systems OMC, It is a division of Denel SOC LTD, located in Benoni, South Africa. and in Turkey by FNSS Defence Systems. It is based on the Mamba APC of TFM Industries.The RG-31 is built from a V-shaped all-steel welded armor monocoque hull and high suspension, typical of South African mine protected vehicles, providing excellent small-arms and mine blast protection. The vehicle is designed to resist a blast equivalent to two TM-57 anti-tank mines detonating simultaneously. The RG-31 is classified by the United States Department of Defense as a category 1 Mine Resistant Ambush Protected (MRAP) vehicle.
-
VBCI 3D Model
The Véhicule Blindé de Combat d’Infanterie (VBCI, “Armoured vehicle for infantry combat”) is a French Infantry fighting vehicle designed to replace the AMX-10P. They entered active service with the French Army in 2008, with 630 vehicles ordered up to 2010. Spain and the UK have shown interest in the vehicle.The Véhicule Blindé de Combat d’Infanterie is built on an aluminium hull which carries a modular THD steel and titanium armour, which can be replaced in the field. The 8×8 wheel combination is designed to make the VBCI more comfortable and less costly than a tracked vehicle, while giving it sufficient mobility to back the Leclerc tank. The VBCI is also designed to be transportable by the Airbus A400M, with an empty mass less than 18 tonnes (full load mass up to 28 tonnes).
-
Buffalo A2 mine protected vehicle 3D Model
The Buffalo is a wheeled mine resistant ambush protected (MRAP) armored military vehicle built by Force Protection, Inc., division of General Dynamics. It is the largest vehicle in Force Protection’s line-up, followed by the Cougar MRAP and the Ocelot light protected patrol vehicle (LPPV).
-
Nexter Aravis 3D Model
The Aravis is an infantry mobility vehicle developed and built by Nexter. An order for 15 Aravis vehicles was placed by the Délégation Générale pour l’Armement in April 2009 for use by the French Army as a reconnaissance and escort vehicle for engineer units. Deliveries for the initial order began in January 2010.The Aravis’ chassis is based on the Unimog U5000 chassis. The total internal volume for the vehicle is 9.5m3 with 8m3 of that under full armoured protection. The Aravis can be equipped for a variety of roles, including patrol vehicle, ambulance, and command and control vehicle.The Aravis was designed with protection against mines, improvised explosive devices, 14.5mm anti-armour rounds, and 155mm artillery bursts in mind, meeting full STANAG 4596 Level 4 specifications. Like many other mine-protected vehicles, the Aravis was built with a V-hull intended to deflect as much energy as possible from detonations beneath the vehicle away from the vehicle. Nexter has patented the modular hull armour used on the Aravis under the name “Safepro”. The vehicle has survived detonations of 50 kg (110 lb) of TNT at a distance of 5 m (16 ft) in testing.
-
Armored Personnel Carrier APC 3D Model
This is a lower poly APC. It’s great for games, and other purposes.
-
BRM-1 K 3D Model
Command variant of the BMP-1 for motorized rifle regiments, developed in 1972. Production started in 1973. Standard armament was preserved. The troop compartment was redesigned to accommodate field tables and map boards. There is seating space for three officers. It has an a mastil antenna, a radar Tall Mike PSNR-5K R-123M and R-111 radios and a GPK-69 navigation system. Also are equipped with the GLONASS navigation system.Model done on MAX 2013, untextured model.
-
Cheyenne dropship model 3D Model
A 3D model based on the Cheyenne Dropship and APC from the movie Aliens.The model in the files is as shown in Image one and set up with APC on ramp with legs down and wings and ramp etc open. but as you can see from the other images it is possible to manipulate the model so that it closes into flight mode. (But this is not animated and you will need to do this yourself.In downloadable .Rar Files:3ds Max 2014 FileOBJ FileFBX FileAnd all materials and textures used in the model and shown in the images, with exception to those free to 3ds Max software.
-
SDKFZ 253 – BeobPzWg 3D Model
SD.KFZ.253 – Beob.Pz.Wg. – Light Observation Vehicle – German Half-trackOriginally modelled in cinema4D 9.5. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.Features:- Inside scene: – model – 13 textures- All materials, bodypaint-textures and textures are included.- No cleaning up necessary, just drop your models into the scene and start rendering.- No special plugin needed to open scene.- Phong shading interpolation / Smoothing – 35°- c4d Version R16- Polygones – 482036 Vertices – 284335 – 98 Objects – 13 textures- obj File – lwo file – 3ds file – fbx file Version 2010
-
SDKFZ 253 – BeobPzWg – StuGAbt191 3D Model
SD.KFZ.253 – Beob.Pz.Wg. – Light Observation Vehicle – German Half-track – StuG.Abt.191Originally modelled in cinema4D 9.5. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.Features:- Inside scene: – model – 13 textures- All materials, bodypaint-textures and textures are included.- No cleaning up necessary, just drop your models into the scene and start rendering.- No special plugin needed to open scene.- Phong shading interpolation / Smoothing – 35°- c4d Version R16- Polygones – 482036 Vertices – 284335 – 98 Objects – 13 textures- obj File – lwo file – 3ds file – fbx file Version 2010
-
SDKFZ 250 – Halftruck – 10PD 3D Model
SD.KFZ.250/1 – Early Production – German Half-track – 10 Panzer Division – North AfricaOriginally modelled in cinema4D 9.5. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.Features:- Inside scene: – model – 18 textures- All materials, bodypaint-textures and textures are included.- No cleaning up necessary, just drop your models into the scene and start rendering.- No special plugin needed to open scene.- Phong shading interpolation / Smoothing – 35°- c4d Version R16- Polygones – 550695 Vertices – 320805 – 109 Objects – 18 textures- obj File – lwo file – 3ds file – fbx file Version 2010
-
SDKFZ 250 – Halftruck – PzGrenDiv 3D Model
SD.KFZ.250/1 – Early Production – German Half-track – Panzer Grenadier Division GroßdeutschlandOriginally modelled in cinema4D 9.5. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.Features:- Inside scene: – model – 12 textures- All materials, bodypaint-textures and textures are included.- No cleaning up necessary, just drop your models into the scene and start rendering.- No special plugin needed to open scene.- Phong shading interpolation / Smoothing – 35°- c4d Version R16- Polygones – 528693 Vertices – 306313 – 99 Objects – 12 textures- obj File – lwo file – 3ds file – fbx file Version 2010
-
SDKFZ 253 – Beob Pz Wg – StuG Abt 191 3D Model
SD.KFZ.253 – Beob.Pz.Wg. – Light Observation Vehicle – German Half-track – StuG.Abt.191Originally modelled in cinema4D 9.5. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.Features:- Inside scene: – model – 13 textures- All materials, bodypaint-textures and textures are included.- No cleaning up necessary, just drop your models into the scene and start rendering.- No special plugin needed to open scene.- Phong shading interpolation / Smoothing – 35°- c4d Version R16- Polygones – 482036 Vertices – 284335 – 98 Objects – 13 textures- obj File – lwo file – 3ds file – fbx file Version 2010
-
SDKFZ 250 – Halftruck – 24PD 3D Model
SD.KFZ.250/1 – Early Production – German Half-track – 24 Panzer DivisionOriginally modelled in cinema4D 9.5. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.Features:- Inside scene: – model – 12 textures- All materials, bodypaint-textures and textures are included.- No cleaning up necessary, just drop your models into the scene and start rendering.- No special plugin needed to open scene.- Phong shading interpolation / Smoothing – 35°- c4d Version R16- Polygones – 528693 Vertices – 306313 – 99 Objects – 12 textures- obj File – lwo file – 3ds file – fbx file Version 2010Sd.Kfz. 250 was a light armoured halftrack, very similar in appearance to the larger Hanomag-designed SD.KFZ 251, and built by the DEMAG firm, for use by Nazi Germany in World War II.The vehicle was used in a wide variety of roles throughout WW II. The basic troop carrier version was used as an armored personnel carrier for reconnaissance units, carrying scout sections. This basic variant usually mounted one or two MG 34 machineguns. Later variants carried 20 mm, 37 mm, and even 75 mm guns to support the more lightly armed versions.
-
SD.KFZ 250 – Halftruck – PzGrenDiv 3D Model
SD.KFZ.250/1 – Early Production – German Half-track – Panzer Grenadier Division GrodeutschlandOriginally modelled in cinema4D 9.5. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.Features:- Inside scene: – model – 12 textures- All materials, bodypaint-textures and textures are included.- No cleaning up necessary, just drop your models into the scene and start rendering.- No special plugin needed to open scene.- Phong shading interpolation / Smoothing – 35- c4d Version R16- Polygones – 528693 Vertices – 306313 – 99 Objects – 12 textures- obj File – lwo file – 3ds file – fbx file Version 2010Sd.Kfz. 250 was a light armoured halftrack, very similar in appearance to the larger Hanomag-designed SD.KFZ 251, and built by the DEMAG firm, for use by Nazi Germany in World War II.The vehicle was used in a wide variety of roles throughout WW II. The basic troop carrier version was used as an armored personnel carrier for reconnaissance units, carrying scout sections. This basic variant usually mounted one or two MG 34 machineguns. Later variants carried 20 mm, 37 mm, and even 75 mm guns to support the more lightly armed versions.
-
BRM-1 K 3D Model
Command variant of the BMP-1 for motorized rifle regiments, developed in 1972. Production started in 1973. Standard armament was preserved. The troop compartment was redesigned to accommodate field tables and map boards. There is seating space for three officers. It has an a mastil antenna, a radar Tall Mike PSNR-5K R-123M and R-111 radios and a GPK-69 navigation system. Also are equipped with the GLONASS navigation system.Model done on MAX 2013, untextured model.
-
BTR 60 3D Model
Detailed 3D model of the Soviet Russian BTR 60 armored personnel carrier.Model created in 3ds Max 2009 and converted in multiple formats. All formats include materials and texture maps. The Max format uses mental ray materials and render. There’s no need for a third party plugin or anything else, just drop your model in the scene and hit render.The turret is a separate object and may be rotated at will.Accurate scaled model, units cm.Model centered at 0, 0, 0 axis coordinate points.Main objects correctly grouped and named accordingly.One main 4096 x 4096 texture map.Three main 2048 x 2048 texture maps.One main 1024 x 1024 texture map.
-
Pandur II 8X8 APC 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.
Model formats:
– *.max (3ds Max 2008 scanline)
– *.max (3ds Max 2008 vray)
– *.fbx (Multi Format)
– *.obj (Multi Format)
– *.3ds (Multi Format)
– *.mb (Maya 8.5)
– *.lwo (Lightwave 6)
– *.c4d (Cinema 4D 11)
* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)
If you need any other formats we are more than happy to make them for you.
The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.
We greatly appreciate you choosing our 3D models and hope they will be of use.
We look forward to continuously dealing with you.
Sincerely Yours,
Hum3D Team -
Mt-Lbu NVST 3D Model
The MT-LBu is a Soviet multi-purpose fully amphibious armoured carrier which was developed under the factory index Ob’yekt 10 in the late 1960s, based on the MT-LB. It has a more powerful engine, a 40 cm higher hull and a longer chassis with 7 road wheels on each side. This version has a NVST on the turret, 12.7 mm machine gun.
Untextured model done on MAX 2013, only lights and tracks are mapped and textured , maps included. -
Mt-Lbu PKM 762mm 3D Model
The MT-LBu is a Soviet multi-purpose fully amphibious armoured carrier which was developed under the factory index Ob’yekt 10 in the late 1960s, based on the MT-LB. It has a more powerful engine, a 40 cm higher hull and a longer chassis with 7 road wheels on each side. This version has a PKM on the turret, 7.62 mm machine gun.
Untextured model done on MAX 2013, only lights and tracks are mapped and textured , maps included. -
Mt-Lbu PKM 7,62 mm 3D Model
The MT-LBu is a Soviet multi-purpose fully amphibious armoured carrier which was developed under the factory index Ob’yekt 10 in the late 1960s, based on the MT-LB. It has a more powerful engine, a 40 cm higher hull and a longer chassis with 7 road wheels on each side. This version has a PKM on the turret, 7.62 mm machine gun. Untextured model done on MAX 2013, only lights and tracks are mapped and textured , maps included.
-
SDKFZ 251 Ausf B – Walking Stuka – 11PD 3D Model
SD.KFZ.250/7 Ausf.C – Stuka zu Fuss – 11 Panzer Division.
Originally modelled in cinema4D. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.
Features:
– Inside scene: -model – 17 materials
– All materials, bodypaint-textures and textures are included.
– No cleaning up necessary, just drop your models into the scene and start rendering.
– No special plugin needed to open scene.
– Phong shading interpolation / Smoothing – 35°
– c4d Version R11 and R16
– Polygones – 390658 Vertices – 298563 – 158 Objects – 17 textures
– obj File – lwo file – 3ds file – fbx file Version 2010 -
SDKFZ 251 Ausf C – Assault Engineer Vehicle – 7PD 3D Model
SD.KFZ.251/1 Ausf.C – Half-truck Assault Engineer Vehicle
Originally modelled in cinema4D. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.
Features:
– Inside scene: -model – 14 textures
– All materials, bodypaint-textures and textures are included.
– No cleaning up necessary, just drop your models into the scene and start rendering.
– No special plugin needed to open scene.
– Phong shading interpolation / Smoothing – 35°
– c4d Version R11 and R16
– Polygones – 367292 Vertices – 258304 – 145 Objects – 14 textures
– obj File – lwo file – 3ds file – fbx file Version 2010 -
SDKFZ 251 Ausf B – Communications Vehicle – 8PD 3D Model
SD.KFZ 251/3 Ausf.B – Communications Vehicle fitted with radio equipment.
Originally modelled in cinema4D. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.
Features:
– Inside scene: -model – 18 textures
– All materials, bodypaint-textures and textures are included.
– No cleaning up necessary, just drop your models into the scene and start rendering.
– No special plugin needed to open scene.
– Phong shading interpolation / Smoothing – 35°
– c4d Version R11 and R16
– Polygones – 367382 Vertices – 273783 – 149 Objects – 18 textures
– obj File – lwo file – 3ds file – fbx file Version 2010 -
APC UPS Battery Divider (for SMART UPS battery modules) 3D Print Model
Summary
This is an incredibly simple design that replaces the battery divider in larger APC UPS battery banks. The full battery module is comprised of several smaller lead acid batteries, each battery is seperated by one of these small dividers to keep the batteries from touching each other. This is handy when batteries start expanding.
The APC battery modules come with these preinstalled, but they are easily broken when removing swollen batteries from a defective module. Hence why I’m uploading this design.
APC modules that use these are usually in the Smart UPS series (4000, 5000, 6000, etc)
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
No Supports:
No Resolution:
.2 Infill:
100 Notes:
Part is only 2mm thick and I recommend making it a solid piece. -
SDKFZ 251-1 AusfC – Ground Stuka – 24PD 3D Model
SD.KFZ.251/1 Ausf.C – Stuka zu Fuss – 24 Panzer Division.
Originally modelled in cinema4D. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.
Features:
– Inside scene: -model – 16 materials
– All materials, bodypaint-textures and textures are included.
– No cleaning up necessary, just drop your models into the scene and start rendering.
– No special plugin needed to open scene.
– Phong shading interpolation / Smoothing – 35°
– c4d Version R16
– Polygones – 387230 Vertices – 284732 – 163 Objects – 16 textures
– obj File – lwo file – 3ds file – fbx file Version 2010 -
BTR-80A Burnt
Game low-poly 3d-model of destroyed Russian APC BTR-80AIntended for game/realtime/background use. Model was not intended for subdivision. The light rig/HDRI is not included with the scene file and will not render like the preview images. All images were taken in Marmoset Toolbag.Model is built to real-world scale.Units used: Meters.Polys: 9071Tris: 16379Verts: 98162 textures: 4096×4096 (Albedo, Normal, AO, Metalness, Roughness)ATTENTION: textures included only in ‘MAX.zip’File formats: -MAX-FBX-DAE-OBJ-TGA
