Summary
Always need to cut multiple pieces of shrink tubing for cable ends and they look much better if they are uniform in length. The little unit attaches to the one blade of any scissors and the user can adjust the depth to get the desired length. The magnet is a 15mm x 4mm round with a countersunk hole. I use a 4-40 flathead bolt that taps the plastic to secure the magnet. The adjuster is a 4-40 pan head with a nylon locking nut to keep it secured to the gauge plate, but still turns. The other end of the pan head screw threads the magnet/scissor piece to make the adjustment.
Tag: any
-
Shrink Tubing cutter for any scissors 3D Print Model
-
MPCNC spacer for 608zz to remove any play in rails 3D Print Model
Summary
This is a simple spacer you can put on your 608zz bearings to make the ride more smooth without any play. PLA worked great for me and make sure your increase or lower your layer width so you have a good bond. .44 worked for me on a .4 nozzle -
Break away antenna mount for alien style drone or any with 32mm post spread 3D Print Model
Summary
this mount I made because I kept breaking antennas, with this I just have to replace the mount instead of the antenna, lots cheaper, just mount your SMA or RPSMA extension through the hole and attach antenna
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator 2X Rafts:
Doesn’t Matter Supports:
No Resolution:
High -
Raspberry Pi Camera 1.3 holder for Anet A8 (or any 3D printer with 8mm frame)
Summary
Simple one piece holder for Raspberry Pi Camera 1.3, i made this for the Anet A8 but as long your 3Dprinter frame is 8mm and you have clearance, it should be compatible.
Can be printed without supports.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
No Resolution:
0.2 Infill:
10-20%